User talk:Zander

Identifying the kind and number of enclosures we need to get for getting the pedals completed:

• Complete acquisition of kits or PCBs
• Measure and Match PCBs to enclosures
• Acquire additional necessary electronics
• Complete acquisition of enclosures
• Complete the enclosure etch patterns
• Fix patterns for name and holes
• Print and apply patterns to enclosures
• Etch enclosures then sand and clean
• Paint / Swirl enclosures for etch + swirl originality
• Sand and clean enclosures again
• Apply protective coating to enclosure
• Drill enclosures for knobs, switches, and jacks
• Put controls and jacks in enclosures and THEN solder PCBs
• Take PCBs out of enclosures for testing
• Validate build by testing
• Apply PCB anchor to enclosure and prep for final installation
• PCB back into finished enclosure for final setup
• Pedal Assembled complete - LEDs & bezels
• Complete Knobs and boxing, internal ID & serial numbers

1776 Effects

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Acquired?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Bear Hug	PCB	1-7/8" x 1-5/16" 48 mm x 34 mm	1590B	X	No	No	No	No	No	Compressor	X
Britannia Original ROG version	PCB	3-1/8" x 2" 80 mm x 50 mm	1590BB	X	Yes	No	No	No	No	Amp Emulator	X
Britannia Chuck Bones version	PCB	3-1/8" x 2" 80 mm x 50 mm	1590BB	X	Yes	No	No	No	No	Amp Emulator	X
Cardinal Tremolo	PCB	2" x 1-15/16" 51 mm x 49 mm	1590B	X	Yes	No	No	No	No	Tremolo	X
Multiplex Echo Machine	PCB	3-16" x 2-7/16" 78 mm x 62 mm	1590BB	X	Yes	No	No	No	No	Multi-Echo	X
Multiplex Echo Machine + Mod Board	PCB	main: 3-16" x 2-7/16" main: 78 mm x 62 mm, mod: 1-13/16" x 7/8" mod: 46 mm x 22 mm	1590Q	X	No	No	No	No	No	Multi-Echo + Echo-selectable Warble	X
Multiplex Echo Machine + Mod Board + Mod Board	PCB	main: 3-16" x 2-7/16" main: 78 mm x 62 mm, mod 1&2: 1-13/16" x 7/8" mod 1&2: 46 mm x 22 mm	1590J	X	No	No	No	No	No	Multi-Echo + Warble on each Echo	X
Multiplex Jr.	PCB	2-3/16" x 2-7/16" 55 mm x 62 mm	1590B	X	Yes	No	No	No	No	Echo + Warble	X

Need:

• 3 x 1590B: matched
• 3 x 1590BB: matched
• 1 x 1590Q: matched
• 1 x 1590J: matched

To do:

• 3 x 1590B: acquiring, etching, drilling, painting
• 3 x 1590BB: acquiring, etching, drilling, painting
• 1 x 1590Q: matching, acquiring, etching, drilling, painting
• 1 x 1590J: matching, acquiring, etching, drilling, painting

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Mod Board	3	PCB	X-X" x X-X" XX mm x XX mm	N/A	Warble Control

These Mod Boards provide an additional "warble" feature for other effects, but was created specifically by Josh (owner of 1776 Effects) for the Multiplex Echo Machine. From the initial description of the standalone Multiplex Echo, we got the impression that it's possible to not only warble one of the emulated tape heads in the pedal, but actually both of them. We emailed him, and Josh confirmed this to us, so we're making one echo without warble, another unit with a single warble switchable between the two echoes, and a final unit with the two echoes each getting their own warble and controls.

SubTotal Pedals = 8

Cumulative Total = 8

AionFX

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Acquired?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Aperture	PCB	2-5/16" x 1-7/8" 59 mm x 47 mm	1590N1	X	No	No	No	No	No	Octave Fuzz	X
Argent	PCB	2-5/16" x 1-7/8" 59 mm x 47 mm	1590N1	X	Yes	No	No	No	No	Fuzz	X
Astra	PCB	2-5/16" x 1-7/8" 59 mm x 47 mm	1590N1	X	Yes	No	No	No	No	Fuzz	X
Atom Fuzz	PCB	2-5/16" x 1-7/8" 59 mm x 47 mm	1590N1	X	No	No	No	No	No	Overdrive	X
Blueshift	PCB	1: 2-15/16" x 2-3/16" 1: 74 mm x 55 mm 2: 3-13/16" x 2-3/16" 2: 97 mm x 55 mm	1590N1	X	Yes	No	No	No	No	Chorus	X
Cascade	PCB	2-5/16" x 2-7/16" 59 mm x 62 mm	1590N1	X	Yes	No	No	No	No	Distortion	X
Chroma	PCB	2-5/16" x 1-7/8" 59 mm x 47 mm	1590N1	X	Yes	No	No	No	No	Tone Control	X
Delta	PCB	2-5/16" x 1-7/8" 59 mm x 47 mm	1590N1	X	Yes	No	No	No	No	Boost	X
DZ4 Preamp	PCB	3-7/16" x 2-7/16" 88 mm x 62 mm	1590BBS	X	No	No	No	No	No	Preamp	X
Fractal	PCB	2-5/16" x 1-7/8" 59 mm x 47 mm	1590N1	X	Yes	No	No	No	No	Overdrive	X
Hypercube	PCB	1: 2-5/16" x 2-1/2" 1: 59 mm x 63 mm 2: 2-5/16" x 1-5/8" 2: 59 mm x 41 mm	1590N1	X	Yes	No	No	No	No	Fuzz	X
Gale	PCB	2-5/16" x 1-7/8" 59 mm x 47 mm	1590N1	X	No	No	No	No	No	Tone Filter	X
Isotope	PCB	2-5/16" x 1-7/8" 59 mm x 47 mm	1590N1	X	Yes	No	No	No	No	Overdrive	X
IVP Preamp	PCB	1: 7-1/8" x 2-5/16" 1: 182 mm x 58 mm 2: 6-5/8" x 11/16" 2: 167 mm x 17 mm	1590DD	X	No	No	No	No	No	Preamp	X
L5 Preamp	PCB	1: 5-1/2" x 2-5/8" 1: 139 mm x 66 mm 2: 4-15/16" x 11/16" 2: 124 mm x 17 mm	1590XX	X	No	No	No	No	No	Preamp	X
Meridian	PCB	2-5/16" x 2-7/16" 59 mm x 62 mm	1590N1	X	Yes	No	No	No	No	Bass Comp/Enhancer	X
Meridian	PCB	2-5/16" x 2-7/16" 59 mm x 62 mm	1590N1	X	Yes	No	No	No	No	Guitar Comp/Enhancer	X
Monolith	PCB	2-5/16" x 2-7/16" 59 mm x 62 mm, selector: 1-1/16 x 1-1/4" selector: 27 mm x 32 mm	1456 thing	X	No	No	No	No	No	Fuzz	X
Obelisk	PCB	2-5/16" x 2-7/16" 59 mm x 62 mm, selector: 1-1/16 x 1-1/4" selector: 27 mm x 32 mm	1456 thing	X	Yes	No	No	No	No	Overdrive	X
Quadratron	PCB	1: 5-1/2" x 2-5/16" 1: 139 mm x 58 mm 2: 5-1/16" x 15/16" 2: 128 mm x 23 mm	1590XX Other?	X	No	No	No	No	No	Phaser	X
Redshift	PCB	1: 5-1/2" x 2-5/16" 1: 139 mm x 58 mm 2: 5-1/16" x 11/16" 2: 128 mm x 18 mm	1590XX Other?	X	No	No	No	No	No	Phaser	X
Rift	PCB	2-3/16" x 2" 55 mm x 50 mm	1590B	X	Yes	No	No	No	No	Fuzz	X
Spectron	PCB	main: 5-1/2" x 2-1/16" main: 139 mm x 52 mm footswitch: 2-3/16" x 15/16" footswitch: 56 mm x 24 mm selector 1: 1-1/16 x 1-1/4" selector 1: 27 mm x 32 mm selector 2: 1-1/16 x 1-1/4" selector 2: 27 mm x 32 mm	1590XX Other?	X	Yes	No	No	No	No	Filter	X
TS-50 Bass Preamp	PCB	3-7/16" x 2-7/16" 88 mm x 62 mm	1590BBS Other?	X	Yes	No	No	No	No	Preamp	X
VH Drive Channel	PCB	3-7/16" x 2-7/16" 88 mm x 62 mm	1590BBS Other?	X	Yes	No	No	No	No	Preamp	X

Need:

• 1 x 1590B
• 14 x 1590N1
• 3 x 1590BBS
• 1 X 1590DD
• 4 x 1590XX
• 2 x 1456FE2BKBK

To do:

• 1 x 1590B: acquiring, etching, drilling, painting
• 14 x 1590N1: acquiring, etching, drilling, painting
• 3 x 1590BBS: acquiring, etching, drilling, painting
• 1 x 1590DD: acquiring, etching, drilling, painting
• 4 x 1590XX: acquiring, etching, drilling, painting
• 2 x 1456FE2BKBK: acquiring, etching, drilling, painting

Have:

• none

SubTotal Pedals = 25

Cumulative Total = 33

Breakfast Audio

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Acquired?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Big Nothing Distortion	PCB	2-7/8" x 1-5/8" 72 mm x 41 mm	1590BB	X	Yes	No	No	No	No	??	X
Car Crash Oscillator Synth	PCB	3-1/4" x 2-1/4 82 mm x 57 mm	1590BB	X	Yes	No	No	No	No	??	X
Cronenberg Noise Machine	PCB	4-1/8" x 2-1/16" 105 mm x 51 mm	1590BB	X	Yes	No	No	No	No	??	X
Salad Days Fuzz	PCB	3" x 2-1/2" 75 mm x 65 mm	1590BB	X	Yes	No	No	No	No	??	X
Woland Expression Filter	PCB	4-1/8" x 3-15/16" 105 mm x 94 mm	1590XX	X	Yes	No	No	No	No	??	X

Need:

• 4 x 1590BB:
• 1 x 1590XX:

To do:

• 4 x 1590BB: matching, acquiring, etching, drilling, painting
• 1 x 1590XX:

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Burger Feedback Looper	2	PCB	1-1/16" x 7/8" 26 mm x 22 mm	N/A	Loops signal back into itself

The Burger Feedback Looper is a small PCB which is used to loop a signal and throttle it (using a potentiometer) back into itself, tweaking the ability to create more noise. This little looper PCB is obviously intended to put into an enclosure and make another control available on the pedal. We're not really clear right now where this control would be applied, but we're willing to experiment a little and see if this is a worthwhile endeavor.

SubTotal Pedals = 5

Cumulative Total = 38

BYOC

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
5-Knob Compressor	Kit	XX" x XX" XX mm x XX mm	1590N1	X	Yes	No	No	No	Compressor	X
855 Drive	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Overdrive	X
Amp Selector FX Router	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Routing	X
Armstrong Twin	PCB	XX" x XX" XX mm x XX mm	1590N1	X	Yes	No	No	No	Compressor/Octave	X
Bass Chorus	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Chorus	X
B.G. Fuzz	PCB	2-1/8" x 2-5/16" 54 mm x 59 mm	1590B	X	Yes	No	No	No	Fuzz	X
Classic Compressor	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Compressor	X
Color Booster	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Overdrive	X
Envelope Filter Fixed Wah	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Filter	X
Large Beaver	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	Yes	Fuzz	X
Lazy Sprocket	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Volume Swell	X
Leeds Fuzz	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Fuzz	X
Parametric EQ	Kit	XX" x XX" XX mm x XX mm	1590BB	Yes	Yes	No	Yes	No	EQ	X
Parametric Multiband Compressor	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Compressor	X
Phase Royal	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Phaser	X
Soaring Skillet	PCB	3-3/8" x 3-3/4" 87 mm x 96 mm	1590BB2	X	Yes	No	No	No	Phaser/Panner	X
The Swede	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Distortion	X
Tri Boost	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Boost	X

Need:

• 1 x 1590B: matched
• 1 x 1590N1: matched
• 1 x 1590BB: matched

To do:

• 1 x 1590B: acquiring, etching, drilling, painting
• 11 x 1590N1 (have): etching, painting
• 1 x 1590N1: acquiring, etching, drilling, painting
• 1 x 1590BB (have): etching, painting
• 1 x 1590BB: acquiring, etching, drilling, painting

Have:

• 11 x 1590N1: matched, acquired, drilled
• 1 x 1590BB: matched, acquired, drilled

SubTotal Pedals = 18

Cumulative Total = 56

DeadAstronautFX

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Abductor II	PCB	3-1/4" x 3-1/4" 83 mm x 83 mm	1590BB	X	Yes	No	No	No	Delay	X
Astro Flanger	PCB	3-5/16" x 2-5/8" 84 mm x 66 mm	1590BB	X	Yes	No	No	No	Flanger Filter	X
AstroSim	PCB	2-1/8" x 2-5/8" 54 mm x 67 mm	1590N1 or 1590BB	X	Will N1 work like BB?	No	No	No	Cab Emulator	X
AstroSim	PCB	2-1/8" x 2-5/8" 54 mm x 67 mm	1590N1 or 1590BB	X	Will N1 work like BB?	No	No	No	Cab Emulator	X
Black Triangle	PCB	2-1/16" x 2-3/16" 52 mm x 56 mm	1590B	X	Yes	No	No	No	Overdrive	X
Black Triangle	PCB	2-1/16" x 2-3/16" 52 mm x 56 mm	1590B	X	Yes	No	No	No	Overdrive	X
Dreamtime	PCB	3-3/16" x 3-3/16" 81 mm x 80 mm	1590BB	X	Yes	No	No	No	Delay	X
Easydriver	PCB	2-1/16" x 1-7/8" 53 mm x 46 mm	1590B	X	Yes	No	No	No	Overdrive	X
Easydriver	PCB	2-1/16" x 1-7/8" 53 mm x 46 mm	1590B	X	Yes	No	No	No	Overdrive	X
EBE Delay	PCB	2-1/16" x 2-9/16" 53 mm x 65 mm	1590B	X	Yes	No	No	No	Echo	X
Faze Filter	PCB	3-3/16" x 2-1/16" 81 mm x 58 mm	1590BB	X	Yes	No	No	No	Filter/Phaser	X
Skinwalker	PCB	3-1/4" x 1-7/8" 84 mm x 47 mm	1590BB	X	Yes	No	No	No	Distortion	X
Skyscape	PCB	3-3/16" x 2-5/8" 81 mm x 67 mm	1590BB	X	Yes	No	No	No	Chorus	X
Timestream	PCB	2-1/16" x 2-11/16" 53 mm x 69 mm	1590B	X	Yes	No	No	No	Reverb	X
Tremshifter	PCB	3-5/16" x 2" 84 mm x 51 mm	1590BB	X	Yes	No	No	No	Filter/Tremolo	X
Tremshifter	PCB	3-5/16" x 2" 84 mm x 51 mm	1590BB	X	Yes	No	No	No	Filter/Tremolo	X

Need:

• 6 x 1590B matched
• 2 (or zero!) x 1590N1: ?
• 8 (or 10) x 1590BB: matched

To do:

• 6 x 1590B: acquiring, etching, drilling, painting
• 2 (or zero!) x 1590N1: matching
• 8 (or 10) x 1590BB: acquiring, etching, drilling, painting

Have:

• none

SubTotal Pedals = 16

Cumulative Total = 72

DeadEndFX

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Amnesia	PCB	3-7/8" x 3-3/16", 99 mm x 80 mm	1590BB	X	Yes	No	No	No	Echo	X
Andamento	PCB	3-15/16" x 3-1/8" 100 mm x 80 mm	1590BB	X	Yes	No	No	No	Ring Mod/Tremolo/Env Filter	X
Anubis	PCB	3-15/16" x 2-7/8" 100 mm x 74 mm	1590BB	X	Yes	No	No	No	Distortion	X
Atomic Duck	PCB	3-7/8" x 3-1/16" 99 mm x 77 mm	1590BB	X	Yes	No	No	No	Envelope	X
Calypso	PCB	2 @ 3-15/16" x 3-1/4" 2 @ 100 mm x 82 mm	1590BBS (or 1590C)	X	Yes	No	No	No	Phaser	X
Charonium	PCB	3-15/16" x 3-1/8" 100 mm x 80 mm	1590BB	X	Yes	No	No	No	Reverb	X
Cosmo King	PCB	2-15/16" x 5-7/8" 74 mm x 149 mm (Fits Wah)	Wah	X	Yes	No	No	No	Wah	X
Definite Phase	PCB	1: 7-7/8" x 5-1/8" 1: 200 mm x 130 mm, 2: 7-7/8" x 4-1/8" 2: 200 mm x 105 mm	1550G	X	Yes	No	No	No	Phaser	X
DEFX Superfuzz	PCB	3-1/4" x 2-5/16" 82 mm x 62 mm	1590BB	X	Yes	No	No	No	Fuzz	X
Dekadent	PCB	3-3/16" x 4-1/8" 80 mm x 106 mm	1590BB	X	Yes	No	No	No	Preamp / Emulator	X
Enigma	PCB	1: 6-1/4" x 3-3/4" 1: 160 mm x 95 mm, 2: 3-13/16" x 7/8" 2: 96 mm x 24 mm	1590DD	X	Yes	No	No	No	Flanger	X
Flange-a-Rama	PCB	1: 5-1/8" x 2-1/8", 1: 130 mm x 55 mm 2: 5-1/8" x 3-3/16", 2: 130 mm x 80 mm	1590XX	X	Yes	No	No	No	Flanger	X
Freq Tweq v.2	PCB	5-5/16" x 3-5/16", 135 mm x 84 mm	1590J	X	Yes	No	No	No	Parametric EQ	X
Fubble Wubble	PCB	2-15/16" x 4-1/2" 74 mm x 115 mm (Fits Wah)	Wah	X	Yes	No	No	No	Fuzz Wah	X
Glenn	PCB	2" x 2-3/8" 50 mm x 60 mm	1590B	X	Yes	No	No	No	Boost	X
Hooke	PCB	1: 6-5/16" x 1-3/16" 1: 160 mm x 30 mm, 2: 3-15/16" x 1-3/16" 2: 100 mm x 30 mm	1590D	X	Yes	No	No	No	Reverb	X
Inchindown Redux	PCB	5-5/16" x 3-5/16", 135 mm x 84 mm	1590J	X	Yes	No	No	No	Echo	X
Lola Phase	PCB	1 @ 5-1/2" x 4-3/4", 1 @ 140 mm x 120 mm 2 @ 7-7/8" x 4-3/4", 2 @ 200 mm x 121 mm	1550G	X	Yes	No	No	No	Phaser	X
Ludwig II	PCB	1: 6-1/4" x 3-1/8", 1: 160 mm x 80 mm 2: 6-1/4" x 3" 2: 160 mm x 76 mm	1590D + Wah	X	Yes	No	No	No	Synther	X
Moonstone (Deluxe)	PCB	4" x 3" 100 mm x 78 mm	1590BB	X	Yes	No	No	No	Octave Fuzz	X
Mr. Multi	PCB	2-7/8" x 3-15/16" 74 mm x 100 mm (Fits Wah)	Wah	X	Yes	No	No	No	Wah	X
Neofuzz V	PCB	3-1/8" x 3-7/8" 80 mm x 99 mm	1590BB	X	Yes	No	No	No	Fuzz	X
Oiolossë	PCB	4" x 2-1/4" 102 mm x 56 mm	1590N1	X	Yes	No	No	No	Distortion	X
Origami	PCB	3-15/16" x 3-1/16", 100 mm x 78 mm	1590BB2 (or 1590BBS)	X	Yes	No	No	No	Fuzz	X
Pink's Clipper	PCB	2" x 2-3/8", 50 mm x 60 mm	1590B	X	Yes	No	No	No	Overdrive	X
PLLone	PCB	7-7/8" x 4-3/4" 200 mm x 120 mm	1550G	X	Yes	No	No	No	Multiplier	X
Pompei	PCB	1: 9-7/8" x 5-7/8", 1: 250 mm x 150 mm 2: 9-7/8" x 5-7/8" 2: 250 mm x 150 mm 3, diode1: 3-3/16" x 2-1/16" 3, diode1: 80 mm x 67 mm, 4, diode2: 3-3/16" x 2-1/16" 4, diode2: 80 mm x 67 mm, 5, Wah: 2-15/16" x 3-15/16" 5, Wah: 74 mm x 100 mm (Fits Wah)	1456KH3BKBK + Wah + Wah	X	Yes	No	No	No	Synth	X
Reflektor	PCB	1: 6-5/16" x 3-15/16", 1: 160 mm x 100 mm 2: 6-5/16" x 3-15/16", 2: 160 mm x 100 mm 3: 1-5/16" x 1-3/8", 3: 33 mm x 34 mm	1590D	X	Yes	No	No	No	Tube Overdrive	X
Shillelagh	PCB	3-7/8" x 3-3/16", 99 mm x 80 mm	1590BB	X	Yes	No	No	No	Fuzz	X
Spectrum	PCB	4" x 3-1/8" 100 mm x 80 mm	1590BB	X	Yes	No	No	No	Filter	X
Stretta	PCB	2-1/4" x 4", 56 mm x 101 mm	1590N1	X	Yes	No	No	No	Compressor	X
String Ringer	PCB	1: 6-1/4" x 3-3/4" 1: 160 mm x 95 mm, 2: 1-7/8" x 1-1/8" 2: 46 mm x 28 mm	1590DD	X	Yes	No	No	No	Ring Mod	X
String Ringer	PCB	1: 6-1/4" x 3-3/4" 1: 160 mm x 95 mm, 2: 1-7/8" x 1-1/8" 2: 46 mm x 28 mm	1590DD	X	Yes	No	No	No	Ring Mod	X
Talkalizer	PCB	2-15/16" x 3-15/16" 74 mm x 100 mm (Fits in Wah)	Wah	X	Yes	No	No	No	Wah/Formant	X
Tatiana	PCB	4-1/4" x 3-1/4" 108 mm x 83 mm	1590BB	X	Yes	No	No	No	Feedback Looper	X
Terrahawk	PCB	3-3/16" x 3-15/16" 80 mm x 100 mm	1590BB	X	Yes	No	No	No	Boost	X
Tresonator	PCB	2-15/16" x 5-7/8" 74 mm x 149 mm (Fits Wah)	Wah	X	Yes	No	No	No	Filter	X
Trible	PCB	3-15/16" x 2-3/8" 100 mm x 60 mm	1550M	X	Yes	No	No	No	Fuzz	X
Turbotrem	PCB	6-5/16" x 3-3/4", 160 mm x 95 mm	1590D	X	Yes	No	No	No	Tremolo	X
Zuul	PCB	3-15/16" x 3-1/8", 100 mm x 80 mm	1590BB2 (or 1590BBS)	X	Yes	No	No	No	Loop Gate	X

Superfuzz: https://www.youtube.com/watch?v=SqsNQ7PzrcQ

Need:

• 15 x 1590BB
• 8 x Wah
• 2 x 1590N1
• 3 x 1590DD
• 4 x 1590D
• 1 x 1550M
• 3 x 1550G
• 1 x 1590BBS
• 1 x 1590J
• 1 x 1590XX
• 1 x 1456KH3BKBK (Digikey)

The Pompei needs two (2) Wah enclosures repurposed into expression pedals

The Ludwig needs one (1) Wah enclosure repurposed into an expression pedal

To do:

• 15 x 1590BB: acquiring, etching, drilling, painting
• 8 x Wah: acquiring, etching, drilling, painting
• 2 x 1590N1: acquiring, etching, drilling, painting
• 3 x 1590DD: acquiring, etching, drilling, painting
• 4 x 1590D: acquiring, etching, drilling, painting
• 1 x 1550M: acquiring, etching, drilling, painting
• 3 x 1550G: acquiring, etching, drilling, painting
• 1 x 1590BBS: acquiring, etching, drilling, painting
• 1 x 1590J: acquiring, etching, drilling, painting
• 1 x 1590XX: acquiring, etching, drilling, painting
• 1 x 1456KH3BKBK (Digikey): acquiring, etching, drilling, painting

Have:

• none

Ordered:

• pending

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Loop-D-Loop	2	PCB	3-15/16" x 3-1/16" 100 mm x 78 mm	1590BB / 1590BB2	Effects Loop Line Level Adjuster

The Loop-D-Loop isn't so much a pedal as it is more of a useful tool to enable the use of instrument-level (-10 dB) pedals in an unbuffered or line-level effects loop in an amp (+4 dB). They have to be built in a manner that's just the same as a pedal in terms of parts and assembly, and despite the fact that they won't function as sound effect, they will be operated as pedals and so we'll count them as such.

SubTotal Pedals = 40

Cumulative Total = 112

Delptronics

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Thunderclap	Kit	XX" x XX" XX mm x XX mm	1590N1	X	Yes	No	No	No	HandClap	X

Need:

• 1 x 1590N1

To do:

• 1 x 1590N1: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 1

Cumulative Total = 113

Effects Layouts

PCBs for pedals measured - need to finish widgets

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Acquired?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Cloak & Dagger	PCB	1-7/8" x 1-7/16" 48 mm x 36 mm	1590B	X	Yes	No	No	No	No	Preamp / Tone Filter	X
Cranky Speaker*	PCB	1-1/16" x 7/8" 26 mm x 24 mm	NA	No	No	No	No	No	No	Boost	X
EF120 Overdrive	PCB	3-1/4" x 2-3/8" 83 mm x 60 mm	1590BB	X	No	No	No	No	No	Amp Emulator	X
Highflier	PCB	1-15/16" x 1-3/4" 49 mm x 44 mm	1590B	X	Yes	No	No	No	No	Amp Emulator	X
Nezumi Drive	PCB	2-1/16" x 1-7/16" 52 mm x 40 mm	1590B	X	Yes	No	No	No	No	Distortion	X
Odd One Out	PCB	2" x 1-1/2" 51 mm x 38 mmm	1590B	X	Yes	No	No	No	No	Overdrive	X
RNGD	PCB	2-1/16" x 2-1/4" 52 mm x 64 mm	1590B	X	Yes	No	No	No	No	Glitch-Delay	X
Soleo	PCB	2-1/4" x 2-7/16" 56 mm x 61 mm	1590N1	X	Yes	No	No	No	No	Boost / Fuzz	X
Strider*	PCB	1-13/16" x 3/4" 46 mm x 19 mm	NA	No	Yes	No	No	No	No	Boost	X
Strider	PCB	1-13/16" x 3/4" 46 mm x 19 mm	1590B	X	Yes	No	No	No	No	Boost	X
Sunnbeam	PCB	3-5/16" x 2-5/8" 85 mm x 67 mm	1590BB	X	Yes	No	No	No	No	Amp Emulator	X
Super Trouper	PCB	3-5/16" x 1-1/2" 84 mm x 38 mm	1590BB	X	Yes	No	No	No	No	Amp Emulator	X
Suprolo	PCB	3-1/4" x 2-1/16" 82 mm x 52 mm	1590BB	X	Yes	No	No	No	No	Amp Emulator	X
Undercut	PCB	1-15/16" x 1-3/4" 49 mm x 44 mm	1590B	X	Yes	No	No	No	No	Tone Control	X
Virtuoso Fuzz	PCB	2-1/16" x 1-3/4" 52 mm x 44 mm	1590B	X	Yes	No	No	No	No	Fuzz	X

(*) = Not a pedal. Could be for making a builder/tester tool, or be serving as a constituent part to a combo pedal.

Notes:

1. One (1) Strider to be used with PCB Mania Samurai Boost to make Time Machine Boost pedal.
2. Cranky Speaker will likely be combined with PCB Mania Amazing Boost to make "Harmonic Boost" pedal.

Need:

• 8 x 1590B
• 1 x 1590N1
• 4 x 1590BB

To do:

• 8 x 1590B: acquiring, drilling, painting
• 1 x 1590N1: acquiring, drilling, painting
• 4 x 1590BB: acquiring, drilling, painting

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Incandenza	40	PCB	1-5/8" x 1-3/8" 40 mm x 31 mm	N/A	True Bypass Soft Switch
Latching Incandenza	5	PCB	X" x X" X mm x X mm	N/A	Low-Power True Bypass Soft Switch

If these relayed switches are cool enough, like the Fuzzdog HumStop, these could be put into many pedals. Uses 100,000-cycle Momentary Switch for True Bypass instead of conventional 3PDT which is only rated for 25,000 cycles. The internal electronic relay can go 200,000 to 500,000 cycles before needing replacement. This could make pedal switch maintenance much better and pedal switching much more pleasant. The pure relay takes about 50 millivolts, the latching relay uses almost zero. The latching relays will be used on those pedals that already have high power demands.

SubTotal Pedals = 13

Cumulative Total = 127

Electric Druid

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Acquired?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
DigiDelay	PCB	4-5/16" x 2-3/4" 109 mm x 70 mm	1590BB	X	Yes	No	No	No	No	Delay	X
FilterFX	PCB	4-3/8" x 2-3/4" 112 mm x 70 mm	1590BB	X	Yes	No	No	No	No	Filter	X
Flangilicious	PCB	4-3/16" x 1-7/8" 107 mm x 48 mm	1590BB	X	Yes	No	No	No	No	Flanger	X
Hard Bargain	PCB	3-7/8" x 1-11/16" 99 mm x 42 mm	1590BB	X	Yes	No	No	No	No	Distortion	X

Need:

• 4 x 1590BB

To do:

• 4 x 1590BB: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 4

Cumulative Total = 131

Electric Roots

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Birmingham Preamp	PCB	2-5/16" x 1-9/16" 59 mm x 39 mm	1590N1	X	Yes	No	No	No	Distortion	X
Car Crash	PCB	2" x 1-7/16" 51 mm x 36 mm	1590B	X	Yes	No	No	No	Filter	X
Complex Preamp	PCB	1-3/8" x 1-1/16" 34 mm x 27 mm	1590B	X	Yes	No	No	No	Tone Filter	X
Double Don't Do Crack	PCB	1. 1-3/16" x 1" 1. 30 mm x 26 mm 2. 1-3/16" x 1" 2. 30 mm x 26 mm	1590B	X	Yes	No	No	No	Double Boost	X
Joystick	PCB	1-15/16" x 1-5/16" 50 mm x 33 mm	1590B	X	Yes	No	No	No	Synth	X
Octave Fuzz	PCB	1-15/16" x 1-3/16" 49 mm x 30 mm	1590B	X	Yes	No	No	No	Octave Fuzz	X
Synth Filter	PCB	2-3/16" x 1-7/8" 55 mm x 47 mm	1590N1	X	Yes	No	No	No	Synth	X
Thermionic Banshee*	PCB	2" x 1-13/16" 50 mm x 46 mm	Wah	X	Yes	No	No	No	Sound Generator (Theremin)	X
Ventilator	PCB	1-15/16" x 1-5/16" 49 mm x 33 mm	Wah	X	Yes	No	No	No	Sound Generator (Wind Sound)	X

(*) = Not a pedal. Will be serving as a constituent part to a pedal.

Need:

• 5 x 1590B
• 2 x 1590N1
• 2 x Wah

To do:

• 5 x 1590B: acquiring, drilling, painting
• 2 x 1590N1: acquiring, drilling, painting
• 2 x Wah: acquiring, drilling, painting

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Blender	3	PCB	1-3/4" x 1-7/16" 45 mm x 36 mm	1590??	Blend 2 Signals
Impedance Adjuster	2	PCB	1" x 7/8" 27 mm x 22 mm	1590??	Fixes Pickups and Fuzz
Signal Splitter	2	PCB	X-x/x" x X-x/x" 30 mm x 23 mm	1590??	Split Channels (missing from Electric Roots)
Theremin	1	PCB	2" x 1-13/16" 50 mm x 46 mm	1590??	Sound Generator

SubTotal Pedals = 9

Cumulative Total = 140

Fuzzdog Pedals

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
1978 IC Big Fluff Pie	PCB	2" x 1-5/8" 50 mm x 40 mm	1590B	X	Yes	No	No	No	Fuzz	X
Alluring Echo	PCB	2" x 2-5/16" 50 mm x 57 mm	1590B	X	Yes	No	No	No	Echo	X
Big Fluffy Pie (Bass Blender)	PCB	2" x 2" 50 mm x 50 mm	1590B	X	Yes	No	No	No	Bass Fuzz	X
Black Ash Fuzz	PCB	2" x 1-3/16" 50 mm x 30 mm	1590B	X	Yes	No	No	No	Fuzz	X
Blue Boo Boost	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Boost	X
Brain Bomb	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Modulated Echo	X
Broon Sauce	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Overdrive	X
Buffered Pickup Sim	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Buffer	X
Cab Sim ROG Condor	PCB	2" x 1-9/16 50 mm x 46 mm	1590B	X	Yes	No	No	No	CabSim	X
Cream Fluff Fuzz	PCB	2" x 1-5/16" 50 mm x 33 mm	1590B	X	Yes	No	No	No	Fuzz	X
Dirt Dessert	PCB	2" x 1/-13/16" 50 mm x 46 mm	1590B	X	Yes	No	No	No	OD + Overtones	X
Doom Scum	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Fuzz	X
Droid Fuzz Arpeggiator	PCB	main: 2-1/8" x 2" main: 50 mm x 54 mm, rotary pcb: 1-1/16" x 1-1/4" rotary pcb: 32 mm x 27 mm	1590B	X	Yes	No	No	No	Fuzz/Arpeggiator	X
Eight Two Zero Drive	PCB	2" x 2" 50 mm x 50 mm	1590B	X	Yes	No	No	No	Overdrive	X
Engineer's Thumb	PCB	2" x 1-13/16" 50 mm x 47 mm	1590B	X	Yes	No	No	No	Compressor	X
Exploder Fuzz	PCB	2" x 1-5/16" 50 mm x 34 mm	1590B	X	Yes	No	No	No	Fuzz	X
Fat-Ass Blooper	PCB	2" x 1-5/8" 50 mm x 40 mm	1590N1 (if works)	X	Yes	No	No	No	Mixer	X
Fuzz Raw V1	PCB	2" x 1-5/8" 50 mm x 40 mm	1590B	X	Yes	No	No	No	Fuzz	X
GimpFX Ultr-Fk	PCB	1: 3-1/8" x 1-5/8" 1: 80 mm x 40 mm 2: 3-1/8" x 13/16" 2: 80 x 20 mm	1590BB	X	Yes	No	No	No	Bass Dist	X
Gloomy Drive	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Overdrive	X
Golden Sunn	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Overdrive	X
Graphic Fuzz	PCB	2" x 3/4" 50 mm x 20 mm	1590B	X	Yes	No	No	No	Fuzz	X
Green Citrus	Kit	XX" x XX" 50 mm x 46 mm	1590B	X	Yes	No	No	No	Distortion	X
Harmonic Percolator	PCB	2" x 7/8" 50 mm x 22 mm	1590B	X	Yes	No	No	No	Fuzz+Filter	X
Heavy Screamer	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Distortion	X
Heavy Screamer	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Distortion	X
HF Modulator	PCB	2" x 1-7/8" 50 mm x 29 mm	1590B	X	Yes	No	No	No	Bitcrusher	X
Just the Meat	PCB	7/8" x 1" 22 mm x 25 mm	1590B	X	Yes	No	No	No	Boost	X
Liquified Feline	PCB	2" x 1-7/8" 50 mm x 46 mm	1590B	X	Yes	No	No	No	Distortion	X
Manky Fruit Fuzz	PCB	2" x 1-15/16" 50 mm x 48 mm	1590B	X	Yes	No	No	No	Fuzz	X
No-Tube Driver	PCB	2" x 1-5/8" 50 mm x 40 mm	1590B	X	Yes	No	No	No	Overdrive	X
No-Tube Driver	PCB	2" x 1-5/8" 50 mm x 40 mm	1590B	X	Yes	No	No	No	Overdrive	X
Nuclear Fuzz	PCB	2" x 2" 50 mm x 50 mm	1590B	X	Yes	No	No	No	Fuzz	X
Orange Fettler	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Distortion	X
Orange King	PCB	2" x 1-7/16" 50 mm x 35 mm	1590B	X	Yes	No	No	No	Distortion	X
Orange King v2	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Distortion	X
OVD-1	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Overdrive	X
Reasonably Good Mangler	PCB	2" x 1-5/16" 50 mm x 34 mm	1590BB	X	Yes	No	No	No	Fuzz	X
Recurring Nightmare	Kit	3-3/16" x 2" 80 mm x 50 mm	1590BB	X	Yes	No	No	No	Echo	X
Repeater	PCB	2" x 7/8" 50 mm x 22 mm	1590B	X	Yes	No	No	No	Tremolo	X
Sideswipe	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Overdrive	X
Sonic Tight'un	PCB	2" x 15/16" 50 mm x 22 mm	1590B	X	Yes	No	No	No	Distortion	X
Spooky Mids	PCB	2" x 1-3/8" 50 mm x 34 mm	1590B	X	Yes	No	No	No	EQ	X
Sunny-T Extreme	PCB	2" x 1-5/16" 50 mm x 33 mm	1590B	X	Yes	No	No	No	Distortion	X
Super Cranker	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590B	X	Yes	No	No	No	Boost/Overdrive	X
Total Eclipse (+GPCB Sunn-T)	PCB	2" x 1-5/16" 50 mm x 33 mm	1590XX	X	Yes	No	No	No	Distortion	X
Tight White Drive	PCB	2" x 1-9/16" 50 mm x 40 mm	1590B	X	Yes	No	No	No	Overdrive	X
Two Dozen Silvertones	PCB	2" x 1-7/8" 50 mm x 46 mm	1590B	X	Yes	No	No	No	Amp Emulator	X
Verb Engine	PCB	3-3/16" x 1-5/16" 80 mm x 33 mm	1590BB	X	Yes	No	No	No	Reverb	X
War Pig	PCB	2" x 1-3/4" 50 mm x 44 mm	1590B	X	Yes	No	No	No	Distortion	X
Warp Sound	PCB	2" x 1-3/16" 50 mm x 30 mm	1590B	X	Yes	No	No	No	Distortion + Envelope	X
Wolf Computer	PCB	2" x 1-5/16" 50 mm x 34 mm	1590BB	X	Yes	No	No	No	Fuzz	X
Wrecktifier	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590BB	X	Yes	No	No	No	Distortion	X

Need:

• 38 x 1590B
• 1 x 1590N1
• 5 x 1590BB
• 1 x 1590XX (maybe a 1590J?)

To do:

• 38 x 1590B: acquiring, drilling, painting
• 1 x 1590N1: acquiring, drilling, painting
• 5 x 1590BB: acquiring, drilling, painting
• 1 x 1590XX (maybe a 1590J?): acquiring, drilling, painting

Have:

• Nothing

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Big Muff Tonestack Mini	2	Tone Control	X" x X" XX mm x XX mm	1090NS	Zero-gain Big Muff Tone Control
Blender II	2	Mixer	X" x X" XX mm x XX mm	N/A	Mixes 1 Signal (Effect) into another
Buffered Pickup Sim	2	Line-Loader	1-15/16" x 1-1/16" 50 mm x 28 mm	1090B	Pickup Impedance Emulator
Clipper	2	Diode Selector	X" x X" XX mm x XX mm	N/A	6-way "diode" Selector.
Cream Buffer	6	Buffer	1" x 1" 25 mm x 25 mm	1090NS	Pete Cornish Transistor Buffer
Dude Boost	3	Boost	X" x X" XX mm x XX mm	N/A	Small footprint FET boost / Possible Buffer
Electrica+	3	Boost	X" x X" 25 mm x 22 mm	N/A	Multi-circuit Distortion / Possible Buffer
Hum Stop	150	Power Filter	X" x X" XX mm x XX mm	N/A	In-pedal Power Hum Filter
Inverting Buffer	7	Buffer	1-1/8" x 1" 28 mm x 25 mm	1090NS	Buffer w/ Phase Inversion
Just the Meat	3	Boost	7/8" x 1" 22 mm x 25 mm	N/A	(Exact same board as Electrica+)
Klon Buffer	8	Buffer	1" x 7/8" 25 mm x 22 mm	1090NS	IC buffer from Klon pedal
Muff Tone	4	Tone Control	X" x X" XX mm x XX mm	1090NS	Gain-available Big Muff Tone Control
Pot Swap	2	Switch	X" x X" XX mm x XX mm	1090NS	Switches Between Two Pots
Switcheroo	4	Switch	X" x X" XX mm x XX mm	1090NS	3-Line Signal Switcher (Effect Order)
Tails	3	Buffer	X" x X" XX mm x XX mm	N/A	Plays Echo Repeats as pedal disengaged
Tigger Boost	2	Boost	X" x X" XX mm x XX mm	N/A	Garcia "Tiger Guitar" Boost

Need:

• 8 x 1090NS

To do:

• 8 x 1090NS: drilling, painting

Have:

• 8 x 1090NS

SubTotal Buffers = 21(?)

SubTotal Pedals = 53

Cumulative Total = 193

General Guitar Gadgets

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
BMP Civil War	Kit	XX" x XX" XX mm x XX mm	1590B	X	Yes	No	No	No	Fuzz	X
BMP GGG Tuned	Kit	XX" x XX" XX mm x XX mm	1590B	X	Yes	No	No	No	Fuzz	X
BMP Green Russian	Kit	XX" x XX" XX mm x XX mm	1590B	X	Yes	No	No	No	Fuzz	X
BMP OpAmp	Kit	XX" x XX" XX mm x XX mm	1590B	X	Yes	No	No	No	Fuzz	X
BMP Rams Head	PCB	2-3/16" x 1-1/2" 55 mm x 38 mm	1590B	X	Yes	No	No	No	Fuzz	X
BMP Triangle	Kit	XX" x XX" XX mm x XX mm	1590B	X	Yes	No	No	No	Fuzz	X
BrassMaster	Kit	XX" x XX" XX mm x XX mm	1590BB	Yes	Yes	No	Yes	No	Bass Fuzz	X
Bronx Cheer	PCB	1-5/8 x 1-3/16" 42 mm x 31 mm	1590B	X	Yes	No	No	No	Fuzz+Filter	X
BSIAB2	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	Yes	Distortion	X
BSIAB2	Kit	XX" x XX" XX mm x XX mm	1590B	X	Yes	No	No	No	Distortion	X
BSIAB2	Kit	XX" x XX" XX mm x XX mm	1590B	X	Yes	No	No	No	Distortion	X
CB1	Kit	XX" x XX" XX mm x XX mm	1590B	Yes	Yes	No	Yes	No	Boost	X
ITS8	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	Yes	Overdrive	X
Klon Centaur	Kit	XX" x XX" XX mm x XX mm	Gorva 1590BB	X	Yes	No	No	Yes	Overdrive	X
MBB	Kit	XX" x XX" XX mm x XX mm	1590N1	X	No	No	No	No	Overdrive	X
Mini Mixer	Kit	XX" x XX" XX mm x XX mm	1590N1	Yes	Yes	No	Yes	No	Mixer	X
Orange Squeezer	Kit	XX" x XX" XX mm x XX mm	1590B	Yes	Yes	No	Yes	Yes	Compressor	X
Rodent	PCB	2-1/8" x 1-7/16" 55 mm x 46 mm	Rat Enclosure	X	Yes	No	Yes	Yes	Distortion	X
Scrabbler	Kit	XX" x XX" XX mm x XX mm	1590N1	X	Yes	No	No	No	Oct/Fuzz	X
Scrabbler	Kit	XX" x XX" XX mm x XX mm	1590N1	X	Yes	No	No	No	Oct/Fuzz	X
TOCT	PCB	2-5/16" x 1-5/16" 59 mm x 33 mm	Wahwah	X	Yes	No	No	No	Oct/Fuzz	X
TOCT	Kit	2-5/16" x 1-5/16" 59 mm x 33 mm	Cheese Wedge	X	Yes	No	No	No	Oct/Fuzz	X
GGG Custom Wah	PCB	2-1/8 x 1-3/4" 55 mm x 44 mm	n/a (combine with TOCT)	X	Yes	No	No	No	Wah	X
GGG Custom Wah	PCB	2-1/8 x 1-3/4" 55 mm x 44 mm	Wahwah	X	Yes	No	No	No	Wah	X

Need:

• 11 x 1590B
• 6 x 1590N1
• 2 x 1590BB
• 1 x Rat enclosure
• 1 x Cheese Wedge (from amplifiedparts.com)
• 3 x Wahwah

To do:

• 10 x 1590B: acquiring, drilling, painting
• 1 x 1590N1: painting
• 2 x 1590N1: acquiring, drilling, painting
• 1 x 1590BB: painting
• 1 x Gorva 1590BB: drilling
• 1 x Cheese Wedge: acquiring, drilling, painting
• 3 x Wah encl.: determine existing enclosure use vs all pedal PCBs

Have:

• 1 x 1590B, drilled, painted (Orange Squeezer)
• 1 x 1590N1: drilled, painted (BSIAB2)
• 1 x 1590N1: drilled, painted (BMP)
• 1 x 1590N1: drilled, (Mini Mixer)
• 1 x 1590BB: drilled, (Brassmaster)
• 1 x Gorva 1590BB: powder coated (Klon)
• 1 x Rat pedal enclosure

NOTE: Rodent was originally for rehousing in an Rat enclosure. Currently have 1 but need 2 TOCT PCBs. Current TOCT will be included into a Wah-wah (for the Dimebag "Wah of expansive doom" treatment). The second will need to be obtained to be put into a cheese wedge enclosure to compare to Dunlop Octavio.

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Headphone Amp	1	PCB	2" x 1-3/16" 50 mm x 30 mm	1090NS	Headphone Mini-Amp

SubTotal Pedals = 23

Cumulative Total = 208

God City Instruments

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
6 Knob Compressor	PCB	2-5/16" x 1-7/8" 58 mm x 35 mm	1590N1	X	Yes	No	No	No	Compressor	X
Apostle	PCB	3-1/16" x 2-9/16" 79 mm x 66 mm	1590BB	X	Yes	No	No	No	Distortion	X
Bass Brutalist	PCB	2-5/16" x 1-7/8" 59 mm x 48 mm	1590N1	X	Yes	No	No	No	Distortion	X
Bass Overdrive	PCB	3-1/4" x 2-1/8" 82 mm x 55 mm	1590BB	X	Yes	No	No	No	Distortion	X
CTG	PCB	3" x 2-3/8" 76 mm x 60 mm	1590BB	X	Yes	No	No	No	Distortion	X
HM2_v.NW	PCB	3-1/4" x 2-3/16" 82 mm x 55 mm	1590BB	X	Yes	No	No	No	Distortion	X
MT2_v.NW	PCB	3-1/4" x 2-3/16" 83 mm x 55 mm	1590BB	X	Yes	No	No	No	Distortion	X
Socialist Jr.	PCB	3-3/8" x 1-7/8" 86 mm x 46 mm	1590BB	X	Yes	No	No	No	Distortion	X

Need:

• 2 x 1590N1
• 6 x 1590BB

To do:

• 2 x 1590N1: acquiring, drilling, painting
• 6 x 1590BB: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 8

Cumulative Total = 216

GrindCustoms FX

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Fluffgirl	PCB	2-1/8" x 1-15/16" 55 mm x 50 mm	1590B	X	Yes	No	No	No	Envelope Filter	X
Fluffgirl	PCB	2-1/8" x 1-15/16" 55 mm x 50 mm	1590B	X	Yes	No	No	No	Envelope Filter	X
Goat v3	PCB	2-1/8" x 1-15/16" 55 mm x 50 mm	1590B	X	Yes	No	No	No	Overdrive	X
Machette	PCB	1-15/16" x 2-7/8" 49 mm x 74 mm	1590N1	X	Yes	No	No	No	Filter	X
Ultrastoner	PCB	2-1/8" x 2" 53 mm x 51 mm	1590B	X	Yes	No	No	No	Fuzz	X

Need:

• 4 x 1590B: matched
• 1 x 1590N1: matched

To do:

• 4 x 1590B: acquiring, drilling, painting
• 1 x 1590N1: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 5

Cumulative Total = 221

GuitarPCB

PCBs measured - except for kit build

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
4-Track Fuzz	PCB	1-15/16" x 1-1/2" 50 mm x 38 mm	1590B	X	Yes	No	No	No	Fuzz	X
American Fuzz v3	PCB	1-7/8" x 1-1/2" 46 mm x 37 mm	1590B	X	Yes	No	No	No	Fuzz	X
Apollo Tremolo	PCB	1-15/16" x 1-3/4" 49 mm x 45 mm	Wahwah	X	Yes	No	No	No	Tremolo	X
Dr. Rock v2	PCB	1-3/4" x 1-9/16" 44 mm x 39 mm	1590B	X	Yes	No	No	No	Distortion	X
G-02 Animal v1	PCB	2-3/16" x 2-5/16" 56 mm x 59 mm	1590N1	Yes	Yes	No	Yes	Yes	Fuzz	X
G-02 Animal v1	PCB	2-3/16" x 2-5/16" 56 mm x 59 mm	1590N1	Yes	Yes	No	Yes	Re-do	Fuzz	X
Mastodon Fuzz v2a	PCB	1-7/16" x 1-3/8" 36 mm x 35 mm	1590B	X	Yes	No	No	No	Fuzz	x
MoWah v3	PCB	2-1/16" x 2" 53 mm x 50 mm	Wahwah	X	Yes	No	No	No	Wahwah	X
OMG Mongoose Fuzz v3	PCB	1-5/8" x 1-3/8" 42 mm x 35 mm	1590B	X	Yes	No	No	No	Fuzz	X
Sriracha Fuzz	Kit	XX" x XX" XX mm x XX mm	1590B(?)	X	Yes	No	No	No	Fuzz	X
Sunn-T Preamp	PCB	1-15/16" x 1-11/16" 49 mm x 43 mm	1590BB	X	Yes	No	No	No	Distortion	X
Sunn-T Preamp* (+Fuzzdog Sunny-T)	PCB	1-15/16" x 1-11/16" 49 mm x 43 mm	1590XX (already counted)	Yes	Yes	No	No	No	Amp Emulator	X
Tone Tweq	PCB	2" x 1-1/4" 50 mm x 32 mm	1590B	X	Yes	No	No	No	Tone Control	X

(*) = Not a pedal. Could be for making a builder/tester tool, or be serving as a constituent part to a pedal.

Need:

• 7 x 1590B: matched
• 2 x 1590N1: matched
• 1 x 1590BB: matched
• 2 x Wahwah: matched

To do:

• 7 x 1590B: acquiring, drilling, painting
• 1 x 1590N1: painting
• 1 x 1590N1: acquiring, drilling, painting
• 1 x 1590BB: acquiring, drilling, painting
• 2 x Wahwah: acquiring, drilling, painting

Have:

• 2 x 1590N1: ready

Cool Widgets

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Paramix v4*	PCB	2-1/8" x 1-3/4" 53 mm x 44 mm	1590N1	X	Yes	No	No	No	2-Loop Mixer	X

SubTotal Pedals = 12 (+Sunn-T will be combined w/ Fuzzdog Total Sonic Distortion so not counted)

Cumulative Total = 234

Jed's Peds

PCBs for pedals measured - need to finish widgets

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Double SHO Crackle Boost	PCB	1: 1" x 13/16" 1: 25 mm x 21 mm 2: 1" x 13/16" 2: 25 mm x 21 mm	1590B	X	Yes	No	No	No	Boost	X
Double SHO Crackle Boost	PCB	1: 1" x 13/16" 1: 25 mm x 21 mm 2: 1" x 13/16" 2: 25 mm x 21 mm	1590B	X	Yes	No	No	No	Boost	X
Hot Harmonics	PCB	1-13/16" x 1-7/16" 46 mm x 35 mm	1590B	X	Yes	No	No	No	Distortion	X
Mysheen	PCB	1-15/16" x 1-7/16" 49 mm x 37 mm	1590B	X	Yes	No	No	No	Distortion	X
Supreaux Deux	PCB	2" x 1-1/8" 50 mm x 29 mm	1590B	X	Yes	No	No	No	Overdrive	X

Need:

• 5 x 1590B

To do:

• 5 x 1590B: acquiring, drilling, painting

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
The Test Bed	1	PCB	X-X/X" x X-X/x" XX mm x XX mm	1590??	Circuit Hookup w/ Circuit-In Tone
Maybe Baby!	1	PCB	X-X/X" x X-X/x" XX mm x XX mm	1590??	Powered ABY Switch

Need:

• 2 x 1590??

To do:

• 2 x 1590??: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 5

Cumulative Total = 239

JMK PCBs

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Blue Warbler 2	PCB	1-15/16" x 1-9/16" 49 mm x 39 mm	1590B	X	Yes	No	No	No	Tremolo	X
Expandora	PCB	2-1/4" x 1-9/16" 57 mm x 40 mm	1590N1	X	Yes	No	No	No	Distortion	X
Hoodoo Drive	PCB	1-15/16" x 1" 50 mm x 25 mm	1590B	X	Yes	No	No	No	Overdrive	X
Level Up	PCB	2-3/16" x 1-3/16" 56 mm x 31 mm	1590N1	X	No	No	No	No	Octave Fuzz	X
Modulay	PCB	1-15/16" x 1-15/16" 50 mm x 50 mm	WahWah	X	No	No	No	No	Delay/Echo	X

Need:

• 2 x 1590B
• 2 x 1590N1
• 1 x WahWah

To do:

• 2 x 1590B: acquiring, drilling, painting
• 2 x 1590N1: acquiring, drilling, painting
• 1 x WahWah: acquiring, drilling, painting

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Panner	2	PCB	1-1/8" x 1-3/8" 28 mm x 35 mm	N/A	2-source Panner/Blender gadget
Paralyzer	4	PCB	1-9/16" x 1-3/8" 40 mm x 34 mm	N/A	2-source Parallel-izer/Mixer
Testing Rig	1	PCB	3-1/16" x 1-7/8" 77 mm x 47 mm	1590BBFL	Circuit Tester w/ Listen Probe
Tiny Tester	2	PCB	15/16" x 1-1/16" 20 mm x 23 mm	1590GFL	Test Tone Oscillator

Need:

• 1 x 1590BBFL
• 1 X 1590BFL / 1590GFL

To do:

• 1 x 1590BBFL: acquiring, drilling, painting
• 1 x (1590BFL / 1590GFL? for Tiny Tester and Madbean Road Rage?)

Have:

• 1 x 1590BBFL
• 1 x 1590GFL - Need to see if Tiny Tester / Road Rage combo will fit?

NOTE: "Ultra Tester" / Oscillator projects are to assist in building other pedals: Combination of JMKPCBs Testing Rig / Tiny Testers and Madbean Road Rages

SubTotal Pedals = 5

Cumulative Total = 244

Korg

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Nu:Tekt Harmonic Distortion	Kit	XX" x XX" XX mm x XX mm	1590BB	X	Yes	No	No	No	Distortion	X
Nu:Tekt OD-S	Kit	XX" x XX" XX mm x XX mm	1590BB	X	Yes	No	No	No	Overdrive	X
Nu:Tekt Power Tube Reactor	Kit	XX" x XX" XX mm x XX mm	1590BB	X	Yes	No	No	No	Tone Filter	X

Need:

• 3 x 1590BB

To do:

• 3 x 1590BB: painting

Have:

• 3 x 1590BB: acquired, drilled

SubTotal Pedals = 3

Cumulative Total = 247

Lectric-FX

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Altered State	PCB	4" x 2-7/16" 100 mm x 62 mm	1590BB	X	No	No	No	No	Phaser	X
Bloodstone	PCB	3-1/4" x 2-3/4" 83 mm x 70 mm	1590BB	X	No	No	No	No	Phaser	X
Celeste Chorus	PCB	3-3/16" x 2-3/8" 81 mm x 60 mm	1590BB	X	No	No	No	No	Chorus	X
Countdown	PCB	5-3/8" x 4-3/8" 136 mm x 111 mm	1590XX	X	No	No	No	No	Phaser	X
Dandy Horse	PCB	5-1/4" x 3-15/16" 133 mm x 100 mm	1590XX	X	No	No	No	No	Flanger	X
DC-Echo	PCB	5-3/8" x 3-1/2" 136 mm x 88 mm	1590XX	X	No	No	No	No	Delay	X
Downtown	PCB	5-1/4" x 3-13/16" 133 mm x 97 mm	1590XX	X	No	No	No	No	Fuzz/Octaver	X
Flintlock	PCB	4-1/4" x 2-5/8" 109 mm x 66 mm	1590BB	X	No	No	No	No	Flanger	X
Flyleaf	PCB	3-1/4" x 2-3/4" XX mm x 70 mm	1590BB	X	No	No	No	No	Envelope Follower	X
Mongrel OD	PCB	2" x 2" 50 mm x 50 mm	1590B	X	No	No	No	No	Fuzz Overdrive	X
Old Chap	PCB	3-7/8" x 3-3/8" 98 mm x 84 mm	1590BB	X	No	No	No	No	Flanger	X
Pork Rind	PCB	2" x 2" 50 mm x 50 mm	1590B	X	No	No	No	No	Octave Fuzz (Superfuzz)	X
Soy Sauce	PCB	2-5/16" x 2-7/8" 59 mm x 73 mm	1590N1	X	No	No	No	No	Subharmonizer	X
Zirconia	PCB	2-5/16" x 3-1/4" 59 mm x 83 mm	1590N1	X	No	No	No	No	Delay	X

Need:

• 2 x 1590B
• 2 x 1590N1
• 6 x 1590BB
• 4 x 1590XX

To do:

• 2 x 1590B: acquiring, drilling, painting
• 2 x 1590N1: acquiring, drilling, painting
• 6 x 1590BB: acquiring, drilling, painting
• 4 x 1590XX: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 14

Cumulative Total = 261

Madbean Pedals

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Archibald	PCB	main: 3-5/16" x 4" main: 86 mm x 102 mm, tube pcb: 15/16" tube pcb: 22 mm x 31 mm	1590BB2	X	Yes	No	No	No	Tube Overdrive	X
Bloviator	PCB	1-7/8" x 1-5/16" 48 mm x 34 mm	1590B	X	Yes	No	No	No	Tone Control	X
Blue Steel	PCB	2-5/16" x 2-7/8" 59 mm x 78 mm	1590N1	X	Yes	No	No	No	Overdrive	X
Bumblebee	PCB	1-15/16" x 1-15/16" 50 mm x 50 mm	1590B	X	Yes	No	No	No	Fuzz	X
Burly Bear	PCB	3-3/8" x 2-1/2" 86 mm x 64 mm	1590BB	X	Yes	No	No	No	Fuzz	X
Charlatan	PCB	3-5/16" x 2-13/16" 85 mm x 72 mm	1590BB	X	Yes	No	No	No	Multi-Modulator	X
Current Lover	PCB	3-5/16" x 2-13/16" 85 mm x 71 mm	1590BB	X	Yes	No	No	No	Flanger	X
Dragonbeard	PCB	3-5/16" x 2-1/2" 85 mm x 67 mm	1590BB	X	Yes	No	No	No	Distortion	X
Dragon Hound	PCB	1: 2-3/16" x 2" 1: 55 mm x 57 mm 2: 2-1/8" x 1-3/16" 2: 54 mm x 36 mm	1590B	X	Yes	No	No	No	Overdrive/Distortion	X
Edgelord	PCB	main: 3-3/8" x 3-3/8" main: 87 mm x 87 mm, rotary pcb: 1-1/8" x 1-3/8" rotary pcb: 28 mm x 34 mm	1590BB	X	Yes	No	No	No	Bass Synth	X
Exploder	PCB	2-1/8" x 2-3/8" 53 mm x 61 mm	1590B	X	Yes	No	No	No	Oct/Fuzz	X
Flabulanche	PCB	2" x 2-5/16" 50 mm x 59 mm	1590B	X	Yes	No	No	No	Overdrive	X
Freekout	PCB	2-5/16" x 3-1/16" 59 mm x 77 mm	1590N1	X	Yes	No	No	No	RingMod	X
Fuzzy Britches	PCB	2-1/8" x 1-3/8" 54 mm x 35 mm	1590B	X	Yes	No	No	No	Fuzz	X
Gas Tank	PCB	2-5/16" x 2-11/16" 59 mm x 68 mm	1590N1	X	Yes	No	No	No	Bass Overdrive	X
Glitchee	PCB	2-5/16" x 3-1/16" 58 mm x 78 mm	1590N1	X	Yes	No	No	No	OD + SubOctave + Filter	X
Green Bean	PCB	1-15/16" x 2" 50 mm x 50 mm	1590B	X	Yes	No	No	No	Overdrive	X
Green Bean	PCB	1-15/16" x 2" 50 mm x 50 mm	1590B	X	Yes	No	No	No	Overdrive	X
Harbinger TWO	PCB	2-3/4" x 3-5/8" 69 mm x 92 mm	Wahwah	X	Yes	No	No	No	Univibe	X
Honeydripper	PCB	2-5/16" x 3-5/16" 60 mm x 85 mm	1590N1	X	Yes	No	No	No	Vocal Filter	X
Junk Trunk	PCB	2-5/16" x 2-7/8" 59 mm x 75 mm	1590N1	X	Yes	No	No	No	Bass Enveloper	X
Karate Shop	PCB	1-15/16" x 1-15/16" 50 mm x 50 mm	1590B	X	Yes	No	No	No	Tone Control	X
The Laureate	PCB	2-5/8" x 3-3/8" 59 mm x 85 mm	1590N1	X	Yes	No	No	No	Overdrive	X
Mandroid	PCB	4-3/8" x 1-5/8" 112 mm x 41 mm	1590BB	X	Yes	No	No	No	Bitcrusher	X
Mandroid	PCB	4-3/8" x 1-5/8" 112 mm x 41 mm	1590BB	X	Yes	No	No	No	Bitcrusher	X
MeatQlaw	PCB	2-1/8" x 2-3/8" 53 mm x 59 mm	1590B	X	Yes	No	No	No	Boost	X
Mysterioso	PCB	2-5/16" x 2-3/4" 60 mm x 70 mm	1590N1	X	Yes	No	No	No	Overdrive	X
Naughty Fish	PCB	2-1/8" x 2-13/16" 55 mm x 72 mm	1590B	X	Yes	No	No	No	Envelope Filter	X
Peacekeeper	PCB	2" x 1-13/16" 50 mm x 46 mm	1590B	X	Yes	No	No	No	Distortion	X
RangeMaster	PCB	2" x 1-3/4" 50 mm x 44 mm	1590B	X	Yes	No	No	No	Boost	X
Rough Cut	PCB	2-13/16" x 2-5/16" 77 mm x 59 mm	1590N1	X	No	No	No	No	Compressor	X
Rustbucket	PCB	4-1/4" x 3" 109 mm x 77 mm	1590BB	X	Yes	No	No	No	Volume Swell	X
Sharkfin	PCB	3-3/8" x 2-3/8" 85 mm x 60 mm	1590BB	X	Yes	No	No	No	Filter Sample	X
Tone Virus	PCB	3-7/16" x 3" 87 mm x 76 mm	1590BB	X	No	No	No	No	PLL-Synth	X
Total Recall	PCB	main: 3-5/16" x 3-7/8" main: 85 mm x 98 mm, extra bbd: 1-13/16" x 1-1/4" extra bbd: 46 mm x 32 mm	1590BB	X	Yes	No	No	No	Delay	X
Weener Wah	PCB	1-15/16" x 2-1/4" 50 mm x 57 mm	Wahwah	X	Yes	No	Maybe?	Maybe?	Wahwah	X

Need:

• 13 x 1590B
• 9 x 1590N1
• 11 x 1590BB
• 1 x 1590BB2
• 2 x Wahwah

To do:

• 13 x 1590B: acquiring, drilling, painting
• 9 x 1590N1: acquiring, drilling, painting
• 11 x 1590BB: acquiring, drilling, painting
• 1 x 1590BB2: acquiring, drilling, painting
• 2 x Wahwah: acquiring, drilling, painting, treadle-grip

Have:

• None

Cool Widgets

Madbean power board (Road Rage) was first was purchased to be combined with JMKPCBs Testing Rig. Recognized need for 12v power and bought more for a total of 15 in case additional power needs arose. Will keep extra on hand to make 12v and 15v power supplies as necessary.

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Road Rage	15	Power	XX" x XX" XX mm x XX mm	N/A	+12-+15/18v Power Supply
9mm BBoard Pot Adapter	75	Pot Adapter	XX" x XX" XX mm x XX mm	N/A	9mm Pot easy-use for Breadboard
14mm Illuminated Pot Adapter	4	Pot Adapter	XX" x XX" XX mm x XX mm?	N/A	For Glowy Dials on Pedals
1/8" Audio Jack	6	PCB Mount	XX" x XX" XX mm x XX mm	N/A	Audio jack mounts for 1/8" headphone plubs

Notes:

• 1 x Road Rage to be combined with JMKPCBs Testing Rig
• 1 x Road Rage to be combined with JMKPCBs Test Oscillator
• 1 x Road Rage to be combined with Fuzzdog's JTM Boost for 9v/18v switch
• 12 x Road Rage boards kept in reserve

SubTotal Pedals = 36

Cumulative Total = 297

Mask Audio Electronics

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Iommic Boost	PCB	2-3/16" x 1-3/8" 55 mm x 36 mm	1590B	X	Yes	No	No	No	Boost	X
Massive Amp	PCB	2-1/16" x 1-5/8" 53 mm x 42 mm	1590B	X	Yes	No	No	No	Boost	X
One Knob Clang	PCB	1-7/16" x 1-3/8" 40 mm x 36 mm	1590B	X	Yes	No	No	No	Fuzz	X
Quick Face	PCB	2-1/8" x 1-3/8" 55 mm x 35 mm	1590B	X	Yes	No	No	No	Fuzz	X
Shattered Glass	PCB	4-15/16" x 2-5/8" 125 mm x 66 mm	1590XX	X	Yes	No	No	No	State Variable Filter	X
T-Amp	PCB	1-5/8" x 1-1/16" 42 mm x 27 mm	1590B	X	Yes	No	No	No	Distortion	X

Need:

• 5 x 1590B
• 1 x 1590XX

To do:

• 5 x 1590B: acquiring, drilling, painting
• 1 x 1590XX: acquiring, drilling, painting

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Order Switcher	5	PCB	X-X" x X-X" XX mm x XX mm	N/A	Control Switch
Blend	2	PCB	X-X" x X-X" XX mm x XX mm	N/A	Blend on Effect into another

Order switcher allows you to toggle between order of your effects within a multi-PC board pedal. Distortion before overdrive? Overdrive first? This lets you pick.

SubTotal Pedals = 6

Cumulative Total = 303

Moonn Electronics

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
14X32	PCB	1-15/16" x 1-1/4" 49 mm x 31 mm	1590B	X	No	No	No	No	Boost	X
200 Sunny Suns	PCB	1-15/16" x 1-15/16" 49 mm x 49 mm	1590B	X	No	No	No	No	Preamp	X
Aglio e Olio	PCB	1-15/16" x 1-1/16" 49 mm x 27 mm	1590B	X	No	No	No	No	Fuzz	X
Amanita	PCB	1-15/16" x 1-5/16" 49 mm x 34 mm	1590B	X	No	No	No	No	Tremolo	X
Antique Wave Disruptor	PCB	1-15/16" x 31/32" 49 mm x 25 mm	1590B	X	No	No	No	No	Fuzz	X
Do I Know You	PCB	1-15/16" x 1-9/16" 49 mm x 40 mm	1590B	X	No	No	No	No	Noise	X
Fuzz Remedy	PCB	1-7/8" x 1-7/8" 48 mm x 48 mm	1590B	X	No	No	No	No	Fuzz	X
Joghurt Im Rucksack	PCB	1-15/16" x 1-1/8" 49 mm x 27 mm	1590B	X	No	No	No	No	Octave Fuzz	X
Knut	PCB	1-15/16" x 1-1/4" 49 mm x 31 mm	1590B	X	No	No	No	No	Bitcrusher	X
Love Yourself In Every Way	PCB	3-5/16" x 2" 84 mm x 50 mm	1590BB	X	No	No	No	No	Multi-Select Bass Fuzz	X
More Than A Walkman	PCB	1-15/16" x 1-3/16" 49 mm x 35 mm	1590B	X	No	No	No	No	Distortion	X
FuzzheadFX Mosfet Pie	PCB	1-15/16" x 2-3/16" 49 mm x 55 mm	1590B	X	No	No	No	No	Fuzz	X
Mud Tosser	PCB	2" x 1-3/16" 49 mm x 30 mm	1590B	X	No	No	No	No	Fuzz	X
Queen Lizard	PCB	1-15/16" x 1-1/2" 48 mm x 39 mm	1590B	X	No	No	No	No	Octave Fuzz	X
Schwurbel	PCB	1-15/16" x 1-5/16" 49 mm x 34 mm	1590B	X	No	No	No	No	Fuzz w/ Modulated Tremolo(?)	X
Seitan Valve	PCB	1-15/16" x 1-7/16" 49 mm x 46 mm	1590B	X	No	No	No	No	Fuzz	X
FuzzheadFX Stoner Bee	PCB	2" x 1-15/16" 50 mm x 49 mm	1590B	X	No	No	No	No	Fuzz	X
Tryhard	PCB	31/32" x 1-1/8" 25 mm x 29 mm	1590A	X	No	No	No	No	Wah	X

Need:

• 17 x 1590B
• 1 x 1590BB

To do:

• 17 x 1590B: acquiring, drilling, painting
• 1 x 1590BB: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 18

Cumulative Total = 321

MusicPCB

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Gristleizer	PCB	3-1/4" x 2-1/16" 83 mm x 563 mm	1590BB	X	Yes	No	No	No	Tremolo	X
Meat Sphere	PCB	5" x 2-5/16" 127 mm x 59 mm	1590XX	X	Yes	No	No	No	Envelope Filter	X
Uglyface	PCB	2" x 1-7/8" 51 mm x 36 mm	1590B	X	Yes	No	No	No	Fuzz	X

Need:

• 1 x 1590B
• 1 x 1590BB
• 1 x 1590XX

To do:

• 1 x 1590N1: acquiring, drilling, painting
• 1 x 1590BB: acquiring, drilling, painting
• 1 x 1590XX: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 3

Cumulative Total = 324

OLCircuits

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Dr. Watt	Kit	X-X" x X-X" XX mm x XX mm	1590BB	Yes	Yes	No	Yes	No	Amp Emulator	X
Flipster	Kit	X-X" x X-X" XX mm x XX mm	1590BB	Yes	Yes	No	Yes	No	Amp Emulator	X
Orange Peel	Kit	X-X" x X-X" XX mm x XX mm	1590BB	Yes	Yes	No	Yes	No	Amp Emulator	X
Slow Century	Kit	X-X" x X-X" XX mm x XX mm	1590BB	Yes	Yes	No	Yes	No	Amp Emulator	X

Need:

• 1 x 1590N1
• 4 x 1590BB

To do:

• 1 x 1590N1: acquiring, drilling, etching, painting
• 4 x 1590BB: etching, painting

Have:

• 4 x 1590BB: acquired, drilled

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Tube Cricket*	1	Kit	X" x X" XX mm x XX mm	1590N1	Miniature 1W Tube Amp

NOTE: Tube Cricket Pedal in a 1590N1 is much "cooler" than the 1590BB it came with. Going to get and drill a 1590N1. The Tube Cricket is technically a mini-amp, not a pedal and so cannot be counted as such.

SubTotal Pedals = 4

Cumulative Total = 328

Parasit Studio

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
0415 Guitar Synth	PCB	1-15/16" x 2" 49 mm x 50 mm	1590B	X	Yes	No	No	No	Octave	X
0415 Guitar Synth	PCB	1-15/16" x 2" 49 mm x 50 mm	1590B	X	Yes	No	No	No	Octave	X
The Corruptor	PCB	1-7/8" x 1-11/16" 47 mm x 43 mm	1590B	X	Yes	No	No	No	RingMod	X
Darkadiator	PCB	3-1/16" x 2-1/4" 77 mm x 57 mm	1590BB	X	Yes	No	No	No	Oct/Fuzz	X
Into the Unknown	PCB	3-3/8" x 2-3/4" 86 mm x 69 mm	1590BB	X	Yes	No	No	No	Synth	X
Multiwave Guitar Synth	PCB	2-3/16" x 2-1/2" 55 mm x 54	1590B	X	Yes	No	No	No	Synth	X
New Wave CV Generator	PCB	3-3/8" x 3-1/8" 86 mm x 80 mm	1590BB	X	Yes	No	No	No	Control Voltage	X
Quantum Defrakulator Mk3	PCB	4-1/4" x 2-3/4" 109 mm x 70 mm	BBDD?(JJ?)	X	Yes	No	No	No	Synth	X
Sentient Machine	PCB	2-3/8" x 2-7/8" 60 mm x 72 mm	1590N1	X	Yes	No	No	No	Phaser	X
The Sidescroller	PCB	2-3/16" x 2-1/4" 55 mm x 57 mm	1590B	X	Yes	No	No	No	Oct/Fuzz	X
Sonic Reducer	PCB	1-13/16" x 1-3/4" 46 mm x 44 mm	1590B	X	Yes	No	No	No	BitCrusher	X
Theremin Fuzz	PCB	1-7/8" x 1-15/16" 48 mm x 50 mm	1590B	X	Yes	No	No	No	Fuzz	X
Theremin Fuzz	PCB	1-7/8" x 1-15/16" 48 mm x 50 mm	1590B	X	Yes	No	No	No	Fuzz	X
The Xor'cist	PCB	3-3/8" x 1-15/16" 87 mm x 49 mm	1590BB	X	Yes	No	No	No	Distortion	X
The Xor'cist	PCB	3-3/8" x 1-15/16" 87 mm x 49 mm	1590BB	X	Yes	No	No	No	Distortion	X
The Xor'cist	PCB	3-3/8" x 1-15/16" 87 mm x 49 mm	1590BB	X	Yes	No	No	No	Distortion	X

Need:

• 8 x 1590B
• 1 x 1590N1
• 7 x 1590BB

To do:

• 8 x 1590B: acquiring, drilling, painting
• 1 x 1590N1: acquiring, drilling, painting
• 7 x 1590BB: acquiring, drilling, painting

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Mod Board	2	PCB	1-1/4" x 1-5/16" 31 mm x 34 mm	N/A	Warble different effects
RC Box	2	PCB	4-7/8" x 4-1/16" 125 mm x 104 mm	1590XX(?)	Part Substitution and Circuit Test Box

We thought the mod boards would be perfect for the Theremin Fuzzes as the "spooky 1950s" sound of B-grade horror movies typically involved a warbling theremin and we thought it would be cool to recreate this effect even though we plan on building our own theremin too! The RC Boxes are like vintage Resistor/Capacitor decade boxes, but even more functional than those decade boxes as with Parasit Studio RC Boxes you can also chain the resistors and capacitors into both RC or CR filters.

SubTotal Pedals = 16

Cumulative Total = 344

PCB Mania

Most PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Amazing Booster	PCB	1-7/8" x 1-1/8" 47 mm x 28 mm	1590B	X	Yes	No	No	No	Boost	X
Amazing Booster*	PCB	1-7/8" x 1-1/8" 47 mm x 28 mm	X	X	Yes	No	No	No	Boost	X
Amped S-Bass	PCB	3-5/16" x 2-11/16" 84 mm x 68 mm	1590BB	X	Yes	No	No	No	Amp Emulator	X
Appetite for Distortion	PCB	2-5/16" x 2" 59 mm x 50 mm	1590N1	X	Yes	No	No	No	Amp Emulator	X
Atom Boost	PCB	1-7/8" x 1-7/16" 48 mm x 36 mm	1590B	X	Yes	No	No	No	Boost	X
Black Sun of Doom	PCB	3-3/16" x 2-5/8" 81 mm x 68 mm	1590BB	X	Yes	No	No	No	Amp Emulator	X
Bulgarian Fuzz	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590N1	X	Yes	No	No	No	Fuzz	X
Clockwork Orange	PCB	3-7/8" x 1-5/8" 99 mm x 41 mm	1590BB	X	Yes	No	No	No	Amp Emulator	X
Death by Flaming Ring	PCB	2-5/16" x 2-11/16" 58 mm x 69 mm	1590N1	X	Yes	No	No	No	Ring Mod	X
Death by Fuzz I	PCB	1-7/8" x 2" 48 mm x 51 mm	1590B	X	Yes	No	No	No	Fuzz	X
Death by Fuzz I	PCB	1-7/8" x 2" 48 mm x 51 mm	1590B	X	Yes	No	No	No	Fuzz	X
Death by Fuzz III	PCB	4-7/16" x 2-1/2" 112 mm x 63 mm	1590BB	X	Yes	No	No	No	Fuzz	X
Dimehead	PCB	3-5/16" x 2-5/8" 84 mm x 67 mm	1590BB	X	Yes	No	No	No	Amp Emulator	X
Dwarf Destroyer	PCB	2" x 1-5/8" 51 mm x 40 mm	1590B	X	Yes	No	No	No	Fuzz	X
Electric Lover	PCB	3-1/4" x 2-5/8" 82 mm x 68 mm	1590BB	X	Yes	No	No	No	Flanger	X
Engl Preamp	PCB	2-5/16" x 2-11/16" 59 mm x 69 mm	1590N1	X	Yes	No	No	No	Amp Emulator	X
Fuzz-Phase	PCB	3-7/8" x 2-11/16" 86 mm x 69 mm	1590BB	X	Yes	No	No	No	Fuzz / Phaser?	X
Green Lemon	PCB	2-5/16" x 1-13/16" 58 mm x 46 mm	1590N1	X	Yes	No	No	No	Amp Emulator	X
Green Octaver	PCB	1-3/8" x 1-1/4" 36 mm x 31 mm	1590B	X	Yes	No	No	No	Octave	X
Hyperion Fuzz	PCB	2-5/16" x 3-1/2" 59 mm x 89 mm	1590N1	X	Yes	No	No	No	Fuzz	X
JCM-800 PreAmp Simulator	PCB	2-3/8" x 1-7/8" 61 mm x 47 mm	1590N1	X	Yes	No	No	No	Distortion	X
JFT Phaser	PCB	4-5/16" x 3-13/16" 109 mm x 160 mm	1590XX	X	Yes	No	No	No	Phaser	X
Kheiron Klon	PCB	4-7/16" x 2-3/8" 112 mm x 61 mm	1590BB	X	Yes	No	No	No	Overdrive	X
Lemon Bass	PCB	2-5/16" x 2-5/8" 59 mm x 67 mm	1590N1	X	Yes	No	No	No	Amp Emulator	X
Lemon Rockverb	PCB	2-3/16" x 2" 55 mm x 50 mm	1590N1	X	Yes	No	No	No	Amp Emulator	X
Mad Blue Delay*	PCB	X-X/X" x X-X/X" XX mm x XX mm	Wah	X	Yes	No	No	No	Echo	X
No Noise Gate	PCB	1-7/8" x 1-3/4" 48 mm x 44 mm	1590B	X	Yes	No	No	No	Noise Gate	X
Poly-face	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590XX	X	Yes	No	No	No	Phaser	X
Power Engl	PCB	2-5/16" x 2-9/16" 59 mm x 65 mm	1590N1	X	Yes	No	No	No	Amp Emulator	X
Samurai Sword	PCB	1-1/4" x 1-7/8" 33 mm x 47 mm	1590B	X	Yes	No	No	No	Boost	X
Samurai Sword*	PCB	1-1/4" x 1-7/8" 33 mm x 47 mm	X	X	Yes	No	No	No	Boost	X
Slava Ukraine	PCB	6-1/4" x 2-1/2" 160 mm x 65 mm	1590DD + Wah (expression)	X	Yes	No	No	No	Wah-Fuzz-Tremolo	X
Slava Ukraine	PCB	6-1/4" x 2-1/2" 160 mm x 65 mm	1590DD + Wah (expression)	X	Yes	No	No	No	Wah-Fuzz-Tremolo	X
Soldado Preamp	PCB	2-5/16"1-15/16" 59 mm x 50 mm	1590N1	X	Yes	No	No	No	Amp Emulator	X
Soviet Drive	PCB	2-5/16" x 2-3/4" 58 mm x 69 mm	1590N1	X	Yes	No	No	No	Overdrive/Distortion	X
Soviet Phase	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590BB	X	Yes	No	No	No	Phaser	X
Sunn Beta Lead	PCB	3-5/8" x 3-5/8" 86 mm x 86 mm	1590BB	X	Yes	No	No	No	Amp Emulator	X
T.O.C.	PCB	1-15/16" x 1-15/16" 49 mm x 49 mm	1590B	X	Yes	No	No	No	Overdrive	X
Tone Guard Device	PCB	2-1/4" x 2-3/8" 56 mm x 60 mm	1590N1	X	Yes	No	No	No	Compressor	X
Uberknall & Amp Tone Stack	PCB	2-5/16" x 2-13/16" 58 mm x 71 mm	1590N1	X	Yes	No	No	No	Amp Emulator	X
Uberknall Preamp	PCB	2-5/16" x 1-7/8" 59 mm x 48 mm	1590N1	X	Yes	No	No	No	Amp Emulator	X
Vandal From Hell	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590N1	X	Yes	No	No	No	Preamp	X
Wolfgang 5051	PCB	3-15/16" x 2" 99 mm x 51 mm	1590BB	X	Yes	No	No	No	Amp Emulator	X
Zombie Choir II	PCB	2-3/16" x 2-3/16" 56 mm x 56 mm	1590BB	X	Yes	No	No	No	Chorus	X

(*) = Not a pedal. Could be for making a builder/tester tool, or be serving as a constituent part to a pedal.

Need:

• 9 x 1590B
• 16 x 1590N1
• 12 x 1590BB
• 1 x 1590XX
• 2 x Wahwah

To do:

• 9 x 1590B: acquiring, drilling, painting
• 14 x 1590N1: acquiring, drilling, painting
• 12 x 1590BB: acquiring, drilling, painting
• 1 x 1590XX: acquiring, drilling, painting
• 2 x Wahwah: acquiring, drilling, painting

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Clean Blend Master	1	PCB	2-1/4" x 2-1/4" 56 mm x 56 mm	1590N1	Clean Insert
Green Octaver	1	PCB	1-3/8" x 1-1/4" 36 mm x 31 mm	N/A	Octave Up

Clean Blend is listed as a test tool to help insert clean tone so distortion tones don't get lost. Green Octaver is a PC board for the Armstrong Green Ringer. We may include/combine it into a pedal if it strikes us as a good idea. If, after testing, the inclusion actually ends up making a pedal better, we'll keep it in there.

EQ Development Pack

This isn't a pedal, but we're having to do all the same work (actually, it's more) that we would have to do in order to build a pedal, so we're including it here.

PCB Mania offers all their tone stack PCBs in a single discounted package. At the time we purchased this, we questioned ourselves as to whether or not we were being stupid for buying this pack, but obviously, we bought it anyway.

It seemed to us (at the time, and still now) that the best way to use these tone stacks would be to package them together in a single enclosure for circuit development / investigation efforts. So we're building out these PCBs and combining them into a single enclosure. This is so we can make all of the different tone stacks available in a selectable manner. The idea is to make new tone shaping options accessible, for use in, or for interaction with, any effects. Specifically we're interested combining with preamps where we may wish investigate using different tone stacks to find the optimal sounding result. Note the Asterisk with the Camber EQ. The Camber EQ PCB was not offered as part of the original EQ Development Pack, so we ordered it later.

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Active EQ	1	PCB	2-5/16" x 1-1/4" 59 mm x 32 mm	TBD	Tone Stack
Amp Tone Stack & Gain Recovery	1	PCB	2-5/16" x 1-1/8" 59 mm x 29 mm	TBD	Tone Stack
Benzin EQ	1	PCB	2-5/16" x 1-7/16" 59 mm x 36 mm	TBD	Tone Stack
Camber EQ*	1	PCB	X-X/X" x X-X/X" XX mm x XX mm	TBD	Tone Stack
Falcon EQ	1	PCB	2-3/8" x 1-1/4" 60 mm x 32 mm	TBD	Tone Stack
Hybrid EQ	1	PCB	2-5/8" x 1-5/16" 59 mm x 33 mm	TBD	Tone Stack

We always try to match the smallest enclosure possible taking into consideration the PCB and any controls that need to be fitted. Given preliminary attempts to match out the PCBs to the optimal enclosures, right now the 1550G appears to be a reasonable size (Though . In this case, obtaining a 5-pole 5-throw rotary switch (to switch power in/out, signal in/out, and an "active" indicator to select between the various tone stack PCBs) seems to be forcing us into the larger enclosures that Hammond makes. Vertical alignment of the PCBs in the enclosure appears to make a smaller enclosure possible. The 6P5T rotary we were able to find at a reasonable price is deeper (about 2 inches total) than any other rotaries we've spec'ed out for a build.

Need:

• 1 x 1550G

To do:

• 1 x 1550G: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 42

Cumulative Total = 378

Pedal PCB

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Acid Rain Fuzz	PCB	1-15/16" x 1-15/16" 49 mm x 49 mm	1590B	X	Yes	No	No	No	Fuzz	X
ADHD Overdrive	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590N1	X	Yes	No	No	No	Overdrive	X
Aphrodite Overdrive	PCB	2-1/8" x 2-3/8" 53 mm x 60 mm	1590N1	X	Yes	No	No	No	Overdrive	X
Argentum 1212 Preamp	PCB	2-1/4" x 2-3/8" 57 mm x 60 mm	1590N1	X	Yes	No	No	No	Overdrive	X
Backfeeder	PCB	3-5/16" x 2-1/2" 84 mm x 63 mm	1590BB	X	Yes	No	No	No	Distortion / Feedback	X
Black Tiger Boost	PCB	1-5/16" x 1-5/8" 33 mm x 42 mm	1590B	X	Yes	No	No	No	Boost	X
Bolide Distortion	PCB	2-3/8" x 2-7/16" 60 mm x 62 mm	1590N1	X	Yes	No	No	No	Distortion	X
Boogie Monster	PCB	2-1/4" x 2-1/4" 57 mm x 58 mm	1590N1	X	Yes	No	No	No	Distortion	X
BuGGFX Daydream	PCB	2-1/4" x 2" 57 mm x 51 mm	1590N1	X	Yes	No	No	No	Multiband Delay	X
BuGGFX Raincoat	PCB	1-15/16" x 1-15/16" 49 mm x 49 mm	1590B	X	Yes	No	No	No	Distortion	X
Buzz Tone Fuzz	PCB	1-15/16" x 1-9/16" 49 mm x 40 mm	1590B	X	Yes	No	No	No	Fuzz	X
Chaos Machine	PCB	3-15/16" x 2-1/2" 100 mm x 63 mm	1590XX	X	Yes	No	No	No	Multi-Modulator	X
Clandestine Preamp	PCB	1-15/16" x 3-1/16" 49 mm x 77 mm	1590B	X	Yes	No	No	No	Preamp	X
Cleric Fuzz	PCB	2-3/8" x 2-3/8" 60 mm x 60 mm	1590N1	X	Yes	No	No	No	Fuzz	X
Closed Circuit Booster Limiter	PCB	2" x 2-3/16" 50 mm x 54 mm	1590B	X	Yes	No	No	No	Tone Filter	X
Closed Circuit Booster Limiter	PCB	2" x 2-3/16" 50 mm x 54 mm	1590B	X	Yes	No	No	No	Tone Filter	X
Deflector Reverb	PCB	2-1/4" x 2-1/8" 57 mm x 53 mm	1590N1	X	Yes	No	No	No	Reverb	X
Double Pendulum	PCB	3-1/16" x 2-5/8" 77 mm x 67 mm	1590BB	X	Yes	No	No	No	Tremolo	X
Double Pendulum	PCB	3-1/16" x 2-5/8" 77 mm x 67 mm	1590BB	X	Yes	No	No	No	Tremolo	X
Duocast	PCB	4-1/16" x 1-1/2" 103 mm x 37 mm	1590BBM	X	Yes	No	No	No	Preamp	X
Eschaton Preamp	PCB	X-X/X" x X-X/X" XX mm x XX mm	1590N1	X	Yes	No	No	No	Preamp	X
Golden Falk Overdrive	PCB	2-1/16" x 3" 53 mm x 76 mm	1590N1(B?)	X	Yes	No	No	No	Preamp	X
Kickstart Distortion	PCB	2-3/8" x 2-13/16" 60 mm x 72 mm	1590N1	X	Yes	No	No	No	Distortion	X
Low Tide Modulator	PCB	4-3/8" x 3-3/8" 111 mm x 86 mm	1590BB	X	Yes	No	No	No	Chorus	X
Lycan Overdrive	PCB	2-3/8" x 3-9/16" 60 mm x 91 mm	1590N1	X	Yes	No	No	No	Distortion	X
M800 Overdrive	PCB	2-5/16" x 2-3/8" 58 mm x 60 mm	1590N1	X	Yes	No	No	No	Overdrive	X
Mean Green Metal Machine	PCB	2-1/16" x 2-1/8" 52 mm x 54 mm	1590B	X	Yes	No	No	No	Distortion	X
Mercurial Boost	PCB	2" x 1-9/16" 50 mm x 39 mm	1590B	X	Yes	No	No	No	Tone Filter & Boost	X
Mojito Deluxe Overdrive	PCB	2-1/4" x 2-7/16" 57 mm x 61 mm	1590N1	X	Yes	No	No	No	Overdrive	X
Mojito Deluxe Overdrive	PCB	2-1/4" x 2-7/16" 57 mm x 61 mm	1590N1	X	Yes	No	No	No	Overdrive	X
Mystery Machine	PCB	4-1/8" x 2-3/8" 105 mm x 60 mm	1590BB	X	Yes	No	No	No	Overdrive	X
Parasite Wah	PCB	3-15/16" x 3" 100 mm x 75 mm	Wah-wah	X	Yes	No	No	No	Wah-Wah	X
Parasite Wah	PCB	3-15/16" x 3" 100 mm x 75 mm	Wah-wah	X	Yes	No	No	No	Wah-Wah	X
Pharmacist Overdrive	PCB	4-1/8" x 2-1/4" 105 mm x 56 mm	1590BB	X	Yes	No	No	No	Overdrive	X
Quarantine Fuzz: Boneyard	PCB	2-1/4" x 2-1/4" 56 mm x 56 mm	1590N1	X	Yes	No	No	No	Fuzz	X
Radium Springs	PCB	2-1/4" x 2" 57 mm x 51 mm	1590N1	X	Yes	No	No	No	Reverb	X
Skeptical Buffer	PCB	2-3/8" x 2-15/16" 60 mm x 85 mm	1590N1	X	Yes	No	No	No	Line Driver	X
Skeptical Buffer	PCB	2-3/8" x 2-15/16" 60 mm x 85 mm	1590N1	X	Yes	No	No	No	Line Driver	X
Son of Ben Preamp	PCB	1-15/16" x 1-15/16" 49 mm x 49 mm	1590B	X	Yes	No	No	No	Preamp	X
Son of Ben Preamp	PCB	1-15/16" x 1-15/16" 49 mm x 49 mm	1590B	X	Yes	No	No	No	Preamp	X
Sorcerer	PCB	1-15/16" x 1-15/16" 49 mm x 49 mm	1590B	X	Yes	No	No	No	Distortion	X
Sorcerer	PCB	1-15/16" x 1-15/16" 49 mm x 49 mm	1590B	X	Yes	No	No	No	Distortion	X
Sproing Deluxe Reverb	PCB	4-5/16" x 2-1/4" 110 mm x 56 mm	1590BB	X	Yes	No	No	No	Reverb	X
TearJerker Wah	PCB	3-15/16" x 3" 100 mm x 75 mm	Wah-wah	X	Yes	No	No	No	Wah-Wah	X
Thermionic Deluxe	PCB	5-3/16" x 2-3/8" 133 mm x 61 mm	1590XX	X	Yes	No	No	No	Dual Distortion	X
Tyrian Distortion	PCB	2-1/4" x 2-7/16" 57 mm x 61 mm	1590N1	X	Yes	No	No	No	Distortion	X
UniCab	PCB	2-1/4" x 1-15/16" 67 mm x 49 mm	1590N1	X	Yes	No	No	No	Cabinet Emulator	X
Unison Double Tracker	PCB	2-1/4" x 2" 58 mm x 51 mm	1590N1	X	Yes	No	No	No	Modulated Reverb	X
Valhalla Distortion	PCB	3-5/16" x 1-15/16" 84 mm x 49 mm	1590BB	X	Yes	No	No	No	Distortion	X
Viceroy Overdrive	PCB	2-5/16" × 2-3/8" 59 mm x 60 mm	1590N1	X	Yes	No	No	No	Overdrive	X

Need:

• 14 x 1590B
• 22 x 1590N1
• 8 x 1590BB
• 1 x 1590BBS
• 2 x 1590XX
• 3 x Wah

To do:

• 14 x 1590B: acquiring, drilling, painting
• 22 x 1590N1: acquiring, drilling, painting
• 8 x 1590BB: acquiring, drilling, painting
• 1 x 1590BBS: acquiring, drilling, painting
• 2 x 1590XX: acquiring, drilling, painting
• 3 x Wah-wah: acquiring, drilling, painting

Have:

• none

Cool Widgets

Widget	Count	Type	PCB Dimensions	Enclosure	Description
Intelligent Relay Bypass Module	20	PCB	X-X" x X-X" XX mm x XX mm	NA	"Intelligent Function" Soft Switch
DC Jack Breakout Board	5	PCB	X-X" x X-X" XX mm x XX mm	NA	Power Rail

SubTotal Pedals = 50

Cumulative Total = 428

Rullywow

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Arcadiator	PCB	3-5/16" x 1-7/8" 84 mm x 48 mm	1590BB	X	Yes	No	No	No	Oct/Fuzz	X
Canned Yam	PCB	1-15/16" x 1-5/8" 49 mm x 42 mm	1590B	X	Yes	No	No	No	Bass Preamp	X
Chugga Preamp	PCB	1-15/16" x 1-1/2" 48 mm x 38 mm	1590B	X	Yes	No	No	No	Boost	X
Demented Compressor	PCB	1-15/16" x 1-5/8" 48 mm x 41 mm	1590B	X	Yes	No	No	No	Compressor	X
Serpent Boost	PCB	15/16" x 1-1/4" 23 mm x 33 mm	1590B	X	Yes	No	No	No	Boost	X
Superjudge	PCB	1-11/16" x 1-7/16" 49 mm x 37 mm	1590B	X	Yes	No	No	No	Distortion	X
Tremolow	PCB	1-7/8" x 1-3/8" 48 mm x 35 mm	1590B	X	Yes	No	No	No	Tremolo	X

Need:

• 6 x 1590B
• 1 x 1590BB

To do:

• 6 x 1590B: acquiring, drilling, painting
• 1 x 1590BB: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 7

Cumulative Total = 435

SushiBoxFX

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Ambassador	PCB	XX" x XX" XX mm x XX mm	1590BB	X	Yes	No	Yes	No	Preamp	X
Black Eye	PCB	XX" x XX" XX mm x XX mm	1590BB	X	Yes	No	Yes	No	Preamp	X
Diplomat	PCB	XX" x XX" XX mm x XX mm	1590N1	X	Yes	No	Yes	No	Preamp	X
Lab Rat	PCB	XX" x XX" XX mm x XX mm	1590BB	X	Yes	No	Yes	No	Distortion	X
Particle Accelerator	PCB	XX" x XX" XX mm x XX mm	1590N1	X	Yes	No	Yes	No	Preamp	X

Need:

• 2 x 1590N1
• 3 x 1590BB

To do:

• 2 x 1590N1: acquiring, drilling, painting
• 3 x 1590BB: acquiring, drilling, painting

Have:

• none

SubTotal Pedals = 5

Cumulative Total = 440

TH Custom

PCBs measured

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
3-Band Parametriq EQ	PCB	4-1/4" x 3" 107 mm x 76 mm	1590BB	X	Yes	No	No	No	Tone Filter	X
AC-Sim 1.1	PCB	X" x X" xx mm x xx mm	1590B	X	Yes	No	No	No	Tone Filter	X
Cruz Driver	PCB	X" x X" xx mm x xx mm	1590B	X	Yes	No	No	No	Overdrive	X
The Devil	PCB	2" x 1-3/4" 50 mm x 44 mm	1590B	X	Yes	No	No	No	Distortion	X
Merlin's Equinox II	PCB	2-1/4" x 1-15/16" 58 mm x 49 mm	1590B	X	Yes	No	No	No	Reverb	X
Merlin's Glassblower	PCB	X" x X" xx mm x xx mm	1590B	X	Yes	No	No	No	Boost	X
Merlin's Small Time	PCB	2" x 1-13/16" 50 mm x 46 mm	1590B	X	Yes	No	No	No	Echo	X
Merlin's U-Boat	PCB	2-1/4" x 1-1/2" 58 mm x 49 mm	1590B	X	Yes	No	No	No	Octave	X
ROG Ginger	PCB	2" x 1-7/16" 50 mm x 40 mm	1590B	X	Yes	No	No	No	Amp Emulator	X
ROG Supreaux-Deux	PCB	2" x 1-3/8" 50 mm x 34 mm	1590B	X	Yes	No	No	No	Amp Emulator	X
ROG Thor	PCB	1-15/16" x 1-5/8" 58 mm x 50 mm	1590B	X	Yes	No	No	No	Amp Emulator	X
ROG Trivibe	PCB	2" x 2" 51 mm x 50 mm	1590B	X	Yes	No	No	No	Amp Emulator	X
ROG Umble	PCB	3-3/8" x 1-1/8" 85 mm x 29 mm	1590B	X	Yes	No	No	No	Amp Emulator	X
Tube Driver	PCB	2-3/4" x 2" 70 mm x 50 mm	1590BB	X	Yes	No	No	No	Tube Overdrive	X
Valv-e-tizer	PCB	2" x 2" 51 mm x 50 mm	1590BB	X	Yes	No	No	No	Tube Overdrive	X

Need:

• 12 x 1590B
• 3 x 1590BB

To do:

• 12 x 1590B: acquiring, drilling, painting
• 3 x 1590BB: acquiring, drilling, painting

Have:

• none

Cool Widgets

Widget	Type	PCB Dimensions	Effect
1-Band Parametriq EQ	PCB	3-5/16" x 1-7/8" 84 mm x 48 mm	Widget
10 Watt Amp x2	PCB	3-5/16" x 1-7/8" 84 mm x 48 mm	Widget
Headphone Amp & Stereo Sim x2	PCB	1-15/16" x 1-1/2" 48 mm x 38 mm	Widget
MadBox	PCB	1-15/16" x 1-5/8" 49 mm x 42 mm	Widget
Mini Headphone Extension x3	PCB	1-15/16" x 1-1/2" 48 mm x 38 mm	Widget
Parallel Mixer-Splitter	PCB	1-15/16" x 1-5/8" 49 mm x 42 mm	Widget
Pro-cessor	PCB	1-15/16" x 1-5/8" 48 mm x 41 mm	Widget

SubTotal Pedals = 15

Cumulative Total = 455

Miscellaneous

Pedal	Type	PCB Dimensions	Enclosure	Included?	Matched?	Encl. Etch?	Drilled?	Painted?	Effect	Etch Swirl
Destiny Behemoth	PCB 1: Headphone 2: Behemoth	1: 2-5/16" x 1-3/16" 1: 58 mm x 30 mm 2: 3-15/16" x 3-1/4" 2: 100 mm x 83 mm	1590XX	X	Yes	No	No	No	Self-contained Multi-Unit jjjimi84 @ PedalPCB Destiny Behemoth video	X
Diablado	PCB	3-7/8" x 3-1/16" 98 mm x 77 mm	1590BB(1590BBFL?)	X	Yes	No	No	No	Reverb	X
Fake Klon 1	Silver Enclosure	??	"Classic Klon"	X	Yes	No	No	No	???	X
Fake Klon 2	Gold Enclosure	??	"Classic Klon"	X	Yes	No	No	No	???	X
Fake Klon 3	Teal Enclosure	??	"Classic Klon"	X	Yes	No	No	No	???	X
Fake Klon 4	Cranberry Enclosure	??	"Classic Klon"	X	Yes	No	No	No	???	X
Harmonic Boost	3 Boards encl. splitter board	SC: X" x X" SC: XX mm x XX mm AB: X-X" x X-X" AB: XX mm x XX mm Bl: X-X" x X-X" Bl: XX mm x XX mm	1590BB(?)	X	Yes	No	No	No	Swappable Blendable Dual Boost Germanium Diode vs JFet Tranny Effects Layouts Speaker Cranker & PCBMania Amazing Boost	X
Sunn-T: Total Eclipse	2 Boards	3-7/8" x 3-1/16" 98 mm x 77 mm	1590XX?	X	Yes	No	No	No	Full Sunn Pre and Power Amp GuitarPCB Sunn-T Preamp & Fuzzdog Sunny-T Extreme	X
Banshee	2 Boards	3-7/8" x 3-1/16" 98 mm x 77 mm	Wah-wah	X	Yes	No	No	No	Octave Theremin in a Wah Electric Roots Theremin & PCB Mania Green Octaver	X
Time Machine Boost	2 Boards	1: X" x X" 1: XX mm x XX mm 2: X-X" x X-X" 2: XX mm x XX mm	1590YY(?)	X	Yes	No	No	No	Switchable Dual Boost Toneable Silicon vs Clean JFet Effects Layouts Strider & PCBMania Samurai Sword	X

Need:

• 1 x 1590J (?)
• 1 x Wah-wah

To do:

• 1 x 1590J: acquiring, drilling, painting
• 1 x Wah-wah

Have:

• 1 x Silver Klon enclosure
• 1 x Gold Klon enclosure
• 1 x Teal Klon enclosure
• 1 x Cranberry Klon enclosure

SubTotal Pedals = 10 (Not counting these yet)

Cumulative Total = 465

Outstanding Stuff

• Total: 465 pedals to be completed

Extra Parts

Requiring Enclosures:

• 2 x Fuzzdog Creme Buffer PCBs
• 2 x Fuzzdog Inverting Buffer PCBs
• 4 x Fuzzdog Klon Buffer PCBs

Included in pedals:

• 70 x Fuzzdog Humstop mini-PCBs
• 1 x Fuzzdog stomp switch mini-PCB
• 1 x GGG 4PDT slide-switch
• 2 x GGG 6-way capacitor selector-PCBs
• 3 x GPCB toggle switch selector-PCBs
• 2 x GPCB roto-tone switch selector-PCBs
• 2 x GPCB stomp switch mini-PCBs
• 3 x GrindFX stomp mini-PCBs
• 2 x Parasit Mod mini-PCBs

Enclosures

Need:

• 72 x 1590B
• 31 x 1590N1
• 37 x 1590BB
• 1 x 1590BBFL
• 1 x 1590Q
• 3 x 1590XX
• 1 x 1590D
• 5 x 1590DD
• 2 x 1550G
• 1 x 1456KH3BKBK
• 9 x 1090NS (Done)
• 7 x Wah enclosures
• 600 x Hammond anti-tamper screws

Have:

• 69 x 1590B (Done)
• 16 x 1590N1 (pre-drilled)
• 15 x 1590N1
• 37 x 1590BB (Done)
• 1 x 1590BBFL (flanged box)
• 1 x 1590Q (Done)
• 3 x 1590XX (Done)
• 1 x 1590D (Done)
• 5 x 1590DD (Done)
• 2 x 1550G (Done)
• 1 x 1456KH3BKBK (Done)
• 9 x 1090NS (Done)
• 2 x Wah enclosures
• 350 x Hammond anti-tamper screws

Analysis shows we need:

• total of 186 total enclosures
• 78 x 1590B
• 44 to 49 x 1590BB (@122 or @127)
• 29 to 31 x 1590N1 (@151 or @162)
• 16 x Wah shells
• 7 x 1590XX
• 5 x 1590DD
• 2 x 1550G
• 1 x 1456KH3BKBK
• 1 x 1590D
• 1 x 1590Q

Total DIY Pedals = 465

Total Production Pedals = 115

Total Pedals = 580