Difference between revisions of "User talk:Zander"

From Thermionic Studios
Jump to: navigation, search
(→‎Mask Audio Electronics)
(→‎Mask Audio Electronics)
Line 1,072: Line 1,072:
 
! Pedal || Type || PCB Dimensions || Enclosure || Included? || Matched? || Encl. Etch? || Drilled? || Painted? || Effect || Etch Swirl
 
! Pedal || Type || PCB Dimensions || Enclosure || Included? || Matched? || Encl. Etch? || Drilled? || Painted? || Effect || Etch Swirl
 
|-
 
|-
−
| [[Iommic Boost]] || PCB || XX" x XX"<br />XX mm x XX mm || 1590B || X || Yes || No || No || No || Tremolo || X
+
| [[Iommic Boost]] || PCB || XX" x XX"<br />XX mm x XX mm || 1590B || X || Yes || No || No || No || Boost || X
 
|-
 
|-
−
| [[Shattered Glass]] || PCB || XX" x XX"<br />XX mm x XX mm || 1590XX || X || Yes || No || No || No || Envelope Filter || X
+
| [[Shattered Glass]] || PCB || XX" x XX"<br />XX mm x XX mm || 1590XX || X || Yes || No || No || No || State Variable Filter || X
 
|-
 
|-
−
| [[T-Amp]] || PCB || XX" x XX"<br />XX mm x XX mm || 1590B || X || Yes || No || No || No || Fuzz || X
+
| [[T-Amp]] || PCB || XX" x XX"<br />XX mm x XX mm || 1590B || X || Yes || No || No || No || Distortion || X
 
|}
 
|}
 
Need:
 
Need:

Revision as of 08:49, 5 June 2023

Identifying the kind and number of enclosures we need to get for getting the pedals completed:

  • Complete acquisition of kits or PCBs
  • Measure and Match PCBs to enclosures
  • Acquire additional necessary electronics
  • Complete acquisition of enclosures
  • Complete the enclosure etch patterns
  • Fix patterns for name and holes
  • Print and apply patterns to enclosures
  • Etch enclosures then sand and clean
  • Paint / Swirl enclosures for etch + swirl originality
  • Sand and clean enclosures again
  • Apply protective coating to enclosure
  • Drill enclosures for knobs, switches, and jacks
  • Put controls and jacks in enclosures and THEN solder PCBs
  • Take PCBs out of enclosures for testing
  • Validate build by testing
  • Apply PCB anchor to enclosure and prep for final installation
  • PCB back into finished enclosure for final setup
  • Pedal Assembled complete - LEDs & bezels
  • Complete Knobs and boxing, internal ID & serial numbers

1776 Effects

Pedal Type PCB Dimensions Enclosure Included? Matched? Acquired? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Bear Hug PCB 1-7/8" x 1-5/16"
48 mm x 34 mm		 1590B X No No No No No Compressor X
Britannia PCB 3-1/8" x 2"
80 mm x 50 mm		 1590BB X Yes No No No No Amp Emulator X
Britannia PCB 3-1/8" x 2"
80 mm x 50 mm		 1590BB X Yes No No No No Amp Emulator X
Cardinal Tremolo PCB 2" x 1-15/16"
51 mm x 49 mm		 1590B X Yes No No No No Tremolo X
Multiplex Echo Machine PCB 3-16" x 2-7/16"
78 mm x 62 mm		 1590BB X Yes No No No No Multi-Echo X
Multiplex Echo Machine
+ Modulation Board		 PCB main: 3-16" x 2-7/16"
main: 78 mm x 62 mm,
mod: 1-13/16" x 7/8"
mod: 46 mm x 22 mm		 1590Q X No No No No No Multi-Echo
+ Warble		 X
Multiplex Echo Machine
+ 2 Modulation Boards		 PCB main: 3-16" x 2-7/16"
main: 78 mm x 62 mm,
mod 1&2: 1-13/16" x 7/8"
mod 1&2: 46 mm x 22 mm		 1590J X No No No No No Multi-Echo
+ 2 Warbles		 X
Multiplex Jr. PCB 2-3/16" x 2-7/16"
55 mm x 62 mm		 1590B X Yes No No No No Echo + Warble X

Need:

  • 3 x 1590B: matched
  • 3 x 1590BB: matched
  • 1 x 1590Q: matched
  • 1 x 1590J: matched

To do:

  • 3 x 1590B: acquiring, etching, drilling, painting
  • 2 x 1590BB: acquiring, etching, drilling, painting
  • 1 x 1590Q: matching, acquiring, etching, drilling, painting
  • 1 x 1590J: matching, acquiring, etching, drilling, painting

Have:

  • none
SubTotal Pedals = 8
Cumulative Total = 8

Aion FX

Pedal Type PCB Dimensions Enclosure Included? Matched? Acquired? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Argent PCB xx 1590N1 X Yes No No No No xx X
Astra PCB 2-5/16" x 1-7/8"
59 mm x 47 mm		 1590N1 X Yes No No No No Fuzz X
Blueshift PCB ?? 1590N1 X Yes No No No No Chorus X
Cascade PCB xx 1590N1 X Yes No No No No xx X
Chroma PCB 2-5/16" x 1-7/8"
59 mm x 47 mm		 1590N1 X Yes No No No No Tone Control X
Delta PCB xx 1590N1 X Yes No No No No xx X
Fractal PCB 2-5/16" x 1-7/8"
59 mm x 47 mm		 1590N1 X Yes No No No No Overdrive X
Hypercube PCB ?? 1590N1 X Yes No No No No Fuzz X
Isotope PCB ?? 1590N1 X Yes No No No No Overdrive X
Meridian PCB 2-5/16" x 2-7/16"
59 mm x 62 mm		 1590N1 X Yes No No No No Compressor/Enhancer X
Monolith PCB ?? 1456 thing X Yes No No No No Fuzz X
Obelisk PCB 2-5/16" x 2-7/16"
59 mm x 62 mm,
selector: 1-1/16 x 1-1/4"
selector: 27 mm x 32 mm		 1456 thing X Yes No No No No Overdrive X
Rift PCB ?? 1590B X Yes No No No No Fuzz X
Spectron PCB ?? Custom X Yes No No No No Phaser X
TS-50 Bass Preamp PCB ?? Custom X Yes No No No No Phaser X
VH Drive Channel PCB ?? Custom X Yes No No No No Phaser X

Need:

  • 7 x 1590N1: ???
  • 2 x 1456FE2BKBK

To do:

  • 7 x 1590N1: acquiring, etching, drilling, painting
  • 2 x 1456FE2BKBK: acquiring, etching, drilling, painting

Have:

  • none
SubTotal Pedals = 16
Cumulative Total = 24

Breakfast Audio

Pedal Type PCB Dimensions Enclosure Included? Matched? Acquired? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Car Crash Oscillator Synth PCB 3-1/4" x 2-1/4
82 mm x 57 mm		 1590BB X Yes No No No No ?? X
Cronenberg Noise Machine PCB 4-1/8" x 2-1/16"
105 mm x 51 mm		 1590BB X Yes No No No No ?? X
Salad Days Fuzz PCB 3" x 2-1/2"
75 mm x 65 mm		 1590BB X Yes No No No No ?? X
Woland Expression Filter PCB 4-1/8" x 3-15/16"
105 mm x 94 mm		 1590XX X Yes No No No No ?? X

Need:

  • 3 x 1590BB:
  • 1 x 1590XX:

To do:

  • 3 x 1590BB: matching, acquiring, etching, drilling, painting
  • 1 x 1590XX:

Have:

  • none

Cool Widgets

Widget Count Type PCB Dimensions Enclosure Description
Burger Feedback Looper 2 PCB 1-1/16" x 7/8"
26 mm x 22 mm		 N/A Loops signal back into itself

The Burger Feedback Looper is a small PCB which is used to loop a signal and throttle it (using a potentiometer) back into itself, tweaking the ability to create more noise. This little looper PCB is obviously intended to put into an enclosure and make another control available on the pedal. We're not really clear right now where this control would be applied, but we're willing to experiment a little and see if this is a worthwhile endeavor.

SubTotal Pedals = 4
Cumulative Total = 28

BYOC

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
855 Drive Kit 125B / 1590N1 Yes Yes No Yes No Overdrive X
Amp Selector FX Router Kit 125B / 1590N1 Yes Yes No Yes No Routing X
Armstrong Twin PCB 1590N1 X Yes No No No Compressor/Octave X
B.G. Fuzz PCB 2-1/8" x 2-5/16"
54 mm x 59 mm		 1590B X Yes No No No Fuzz X
Classic Compressor Kit 125B / 1590N1 Yes Yes No Yes No Compressor X
Envelope Filter Fixed Wah Kit 125B / 1590N1 Yes Yes No Yes No Filter X
Large Beaver Kit 125B / 1590N1 Yes Yes No Yes Yes Fuzz X
Lazy Sprocket Kit 125B / 1590N1 Yes Yes No Yes No Volume Swell X
Leeds Fuzz Kit 125B / 1590N1 Yes Yes No Yes No Fuzz X
Parametric EQ Kit 1590BB Yes Yes No Yes No EQ X
Parametric Multiband Compressor Kit 125B / 1590N1 Yes Yes No Yes No Compressor X
Phase Royal Kit 125B / 1590N1 Yes Yes No Yes No Phaser X
Soaring Skillet PCB 3-3/8" x 3-3/4"
87 mm x 96 mm		 1590BB / 1590BB2 / 1590BBS X Yes No No No Phaser/Panner X
The Swede Kit 125B / 1590N1 Yes Yes No Yes No Distortion X
Tri Boost Kit 125B / 1590N1 Yes Yes No Yes No Boost X

Need:

  • 1 x 1590B: matched
  • 1 x 125B / 1590N1: matched
  • 1 x 1590BB: matched

To do:

  • 1 x 1590B: acquiring, etching, drilling, painting
  • 11 x 125B / 1590N1 (have): etching, painting
  • 1 x 125B / 1590N1: acquiring, etching, drilling, painting
  • 1 x 1590BB (have): etching, painting
  • 1 x 1590BB: acquiring, etching, drilling, painting

Have:

  • 11 x 125B / 1590N1: matched, acquired, drilled
  • 1 x 1590BB: matched, acquired, drilled
SubTotal Pedals = 15
Cumulative Total = 43

DeadAstronautFX

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Abductor II PCB 3-1/4" x 3-1/4"
83 mm x 83 mm		 1590BB X Yes No No No Delay X
Astro Flanger PCB 3-5/16" x 2-5/8"
84 mm x 66 mm		 1590BB X Yes No No No Flanger Filter X
AstroSim PCB 2-1/8" x 2-5/8"
54 mm x 67 mm		 125B / 1590N1 or 1590BB X Will N1 work like BB? No No No Cab Emulator X
AstroSim PCB 2-1/8" x 2-5/8"
54 mm x 67 mm		 125B / 1590N1 or 1590BB X Will N1 work like BB? No No No Cab Emulator X
Black Triangle PCB 2-1/16" x 2-3/16"
52 mm x 56 mm		 1590B X Yes No No No Overdrive X
Black Triangle PCB 2-1/16" x 2-3/16"
52 mm x 56 mm		 1590B X Yes No No No Overdrive X
Dreamtime PCB 3-3/16" x 3-3/16"
81 mm x 80 mm		 1590BB X Yes No No No Delay X
Easydriver PCB 2-1/16" x 1-7/8"
53 mm x 46 mm		 1590B X Yes No No No Overdrive X
Easydriver PCB 2-1/16" x 1-7/8"
53 mm x 46 mm		 1590B X Yes No No No Overdrive X
EBE Delay PCB 2-1/16" x 2-9/16"
53 mm x 65 mm		 1590B X Yes No No No Echo X
Faze Filter PCB 3-3/16" x 2-1/16"
81 mm x 58 mm		 1590BB X Yes No No No Filter/Phaser X
Skinwalker PCB 3-1/4" x 1-7/8"
84 mm x 47 mm		 1590BB X Yes No No No Distortion X
Skyscape PCB 3-3/16" x 2-5/8"
81 mm x 67 mm		 1590BB X Yes No No No Chorus X
Timestream PCB 2-1/16" x 2-11/16"
53 mm x 69 mm		 1590B X Yes No No No Reverb X
Tremshifter PCB 3-5/16" x 2"
84 mm x 51 mm		 1590BB X Yes No No No Filter/Tremolo X
Tremshifter PCB 3-5/16" x 2"
84 mm x 51 mm		 1590BB X Yes No No No Filter/Tremolo X

Need:

  • 6 x 1590B matched
  • 2 (or zero!) x 1590N1: ?
  • 8 (or 10) x 1590BB: matched

To do:

  • 6 x 1590B: acquiring, etching, drilling, painting
  • 2 (or zero!) x 1590N1: matching
  • 8 (or 10) x 1590BB: acquiring, etching, drilling, painting

Have:

  • none
SubTotal Pedals = 16
Cumulative Total = 59

DeadEndFX

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Andamento PCB 3-15/16" x 3-1/8"
100 mm x 80 mm		 1590BB X Yes No No No Ring Mod/Tremolo/Env Filter X
Anubis PCB 3-15/16" x 2-7/8"
100 mm x 74 mm		 1590BB X Yes No No No Distortion X
Atomic Duck PCB 3-7/8" x 3-1/16"
99 mm x 77 mm		 1590BB X Yes No No No Envelope X
Calypso PCB 2 @ 3-15/16" x 3-1/4"
2 @ 100 mm x 82 mm		 1590BBS or 1590C X Yes No No No Phaser X
Charonium PCB 3-15/16" x 3-1/8"
100 mm x 80 mm		 1590BB X Yes No No No Reverb X
Cosmo King PCB 2-15/16" x 5-7/8"
74 mm x 149 mm (Fits Wah)		 Wah X Yes No No No Wah X
Definite Phase PCB 1: 7-7/8" x 5-1/8"
1: 200 mm x 130 mm,
2: 7-7/8" x 4-1/8"
2: 200 mm x 105 mm		 1550G X Yes No No No Phaser X
DEFX Superfuzz PCB 3-1/4" x 2-5/16"
82 mm x 62 mm		 1590BB X Yes No No No Fuzz X
Dekadent PCB 3-3/16" x 4-1/8"
80 mm x 106 mm		 1590BB X Yes No No No Preamp / Emulator X
Enigma PCB 1: 6-1/4" x 3-3/4"
1: 160 mm x 95 mm,
2: 3-13/16" x 7/8"
2: 96 mm x 24 mm		 1590DD X Yes No No No Flanger X
Flange-a-Rama PCB 1: 5-1/8" x 2-1/8",
1: 130 mm x 55 mm
2: 5-1/8" x 3-3/16",
2: 130 mm x 80 mm		 1590XX X Yes No No No Flanger X
Freq Tweq v.2 PCB 1: X-x/x" X-x/x",
1: XXX mm x XX mm		 xxxxxx X Yes No No No xxxxxx X
Fubble Wubble PCB 2-15/16" x 4-1/2"
74 mm x 115 mm (Fits Wah)		 Wah X Yes No No No Fuzz Wah X
Glenn PCB 2" x 2-3/8"
50 mm x 60 mm		 1590B X Yes No No No Boost X
Hooke PCB 1: 6-5/16" x 1-3/16"
1: 160 mm x 30 mm,
2: 3-15/16" x 1-3/16"
2: 100 mm x 30 mm		 1590D X Yes No No No Reverb X
Inchindown Redux PCB 1: X-x/x" X-x/x",
1: XXX mm x XX mm		 xxxxxx X Yes No No No xxxxxx X
Ludwig II PCB 1: 6-1/4" x 3-1/8",
1: 160 mm x 80 mm
2: 6-1/4" x 3"
2: 160 mm x 76 mm		 1590D + Wah X Yes No No No Synther X
Moonstone (Deluxe) PCB 4" x 3"
100 mm x 78 mm		 1590BB X Yes No No No Octave Fuzz X
Mr. Multi PCB 2-7/8" x 3-15/16"
74 mm x 100 mm (Fits Wah)		 Wah X Yes No No No Wah X
Neofuzz V PCB 3-1/8" x 3-7/8"
80 mm x 99 mm		 1590BB X Yes No No No Fuzz X
Oiolossë PCB 4" x 2-1/4"
102 mm x 56 mm		 1590N1 X Yes No No No Distortion X
Origami PCB 1: X-x/x" X-x/x",
1: XXX mm x XX mm		 xxxxxx X Yes No No No xxxxxx X
PLLone PCB 7-7/8" x 4-3/4"
200 mm x 120 mm		 1550G X Yes No No No Multiplier X
Pompei PCB 1: 9-7/8" x 5-7/8",
1: 250 mm x 150 mm
2: 9-7/8" x 5-7/8"
2: 250 mm x 150 mm
3, diode1: 3-3/16" x 2-1/16"
3, diode1: 80 mm x 67 mm,
4, diode2: 3-3/16" x 2-1/16"
4, diode2: 80 mm x 67 mm,
5, Wah: 2-15/16" x 3-15/16"
5, Wah: 74 mm x 100 mm (Fits Wah)		 1456KH3BKBK
+ Wah
+ Wah		 X Yes No No No Synth X
Reflektor PCB 1: X-x/x" X-x/x",
1: XXX mm x XX mm		 xxxxxx X Yes No No No xxxxxx X
Spectrum PCB 4" x 3-1/8"
100 mm x 80 mm		 1590BB X Yes No No No Filter X
Stretta PCB 1: X-x/x" X-x/x",
1: XXX mm x XX mm		 xxxxxx X Yes No No No xxxxxx X
String Ringer PCB 1: 6-1/4" x 3-3/4"
1: 160 mm x 95 mm,
2: 1-7/8" x 1-1/8"
2: 46 mm x 28 mm		 1590DD X Yes No No No Ring Mod X
Talkalizer PCB 2-15/16" x 3-15/16"
74 mm x 100 mm (Fits in Wah)		 Wah X Yes No No No Wah/Formant X
Tatiana PCB 4-1/4" x 3-1/4"
108 mm x 83 mm		 1590BB(S?) X Yes No No No Feedback Looper X
Terrahawk PCB 3-3/16" x 3-15/16"
80 mm x 100 mm		 1590BB / 1590BB2 / 1590BBS X Yes No No No Boost X
Tresonator PCB 2-15/16" x 5-7/8"
74 mm x 149 mm (Fits Wah)		 Wah X Yes No No No Filter X
Trible PCB 3-15/16" x 2-3/8"
100 mm x 60 mm		 1550M X Yes No No No Fuzz X
Zuul PCB 1: X-x/x" X-x/x",
1: XXX mm x XX mm		 xxxxxx X Yes No No No xxxxxx X

Superfuzz: https://www.youtube.com/watch?v=SqsNQ7PzrcQ

Need:

  • 13 x 1590BB
  • 8 x Wah
  • 2 x 1590N1
  • 2 x 1590DD
  • 2 x 1590D
  • 2 x 1550M
  • 2 x 1550G
  • 1 x 1590BBS
  • 1 x 1590XX
  • 1 x 1456KH3BKBK (Digikey)
The Pompei needs two (2) Wah enclosures repurposed into expression pedals
The Ludwig needs one (1) Wah enclosure repurposed into an expression pedal

To do:

  • 13 x 1590BB: acquiring, etchinc, drilling, painting
  • 8 x Wah: acquiring, etching, drilling, painting
  • 2 x 1590N1: acquiring, etching, drilling, painting
  • 2 x 1590DD: acquiring, etching, drilling, painting
  • 2 x 1590D: acquiring, etching, drilling, painting
  • 1 x 1550M: acquiring, etching, drilling, painting
  • 2 x 1550G: acquiring, etching, drilling, painting
  • 1 x 1590XX: acquiring, etching, drilling, painting
  • 1 x 1456KH3BKBK (Digikey): acquiring, drilling

Have:

  • none

Ordered:

  • pending

Cool Widgets

Widget Count Type PCB Dimensions Enclosure Description
Loop-D-Loop 2 PCB 3-15/16" x 3-1/16"
100 mm x 78 mm		 1590BB(S?) Effects Loop Line Level Adjuster

The Loop-D-Loop isn't so much a pedal as it is more of a useful tool to enable the use of instrument-level (-10 dB) pedals in an unbuffered or line-level effects loop in an amp (+4 dB). They have to be built in a manner that's just the same as a pedal in terms of parts and assembly, and despite the fact that they won't function as sound effect, they will be operated as pedals and so we'll count them as such.

SubTotal Pedals = 34
Cumulative Total = 93

Delptronics

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Thunderclap Kit 125B / 1590N1 X Yes No No No HandClap X

Need:

  • 1 x 125B / 1590N1

To do:

  • 1 x 125B / 1590N1: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 1
Cumulative Total = 94

Effects Layouts

Pedal Type PCB Dimensions Enclosure Included? Matched? Acquired? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Cloak & Dagger PCB 1-7/8" x 1-7/16"
48 mm x 36 mm		 1590B X Yes No No No No Preamp / Tone Filter X
Cranky Speaker* PCB X" x X"
X mm x X mm		 1590B X No No No No No Boost X
EF120 Overdrive PCB X" x X"
X mm x X mm		 X X No No No No No Amp Emulator X
Highflier PCB 1-15/16" x 1-3/4"
49 mm x 44 mm		 1590B X Yes No No No No Amp Emulator X
Nezumi Drive PCB 2-1/16" x 1-7/16"
52 mm x 40 mm		 1590B X Yes No No No No Distortion X
Odd One Out PCB 2" x 1-1/2"
51 mm x 38 mmm		 1590B X Yes No No No No Overdrive X
RNGD PCB 2-1/16" x 2-1/4"
52 mm x 64 mm		 1590B X Yes No No No No Glitch-Delay X
Soleo PCB 2-1/4" x 2-7/16"
56 mm x 61 mm		 1590N1 X Yes No No No No Boost / Fuzz X
Strider* PCB 1-13/16" x 3/4"
46 mm x 19 mm		 1590B X Yes No No No No Boost X
Strider PCB 1-13/16" x 3/4"
46 mm x 19 mm		 1590B X Yes No No No No Boost X
Sunnbeam PCB 3-5/16" x 2-5/8"
85 mm x 67 mm		 1590BB X Yes No No No No Amp Emulator X
Super Trouper PCB 3-5/16" x 1-1/2"
84 mm x 38 mm		 1590BB X Yes No No No No Amp Emulator X
Suprolo PCB 3-1/4" x 2-1/16"
82 mm x 52 mm		 1590BB X Yes No No No No Amp Emulator X
Undercut PCB 1-15/16" x 1-3/4"
49 mm x 44 mm		 1590B X Yes No No No No Tone Control X
Virtuoso Fuzz PCB 2-1/16" x 1-3/4"
52 mm x 44 mm		 1590B X Yes No No No No Fuzz X

(*) = Not a pedal. Could be for making a builder/tester tool, or be serving as a constituent part to a pedal.

Notes:

  1. One (1) Strider to be used with PCB Mania Samurai Boost to make Time Machine Boost pedal.
  2. Cranky Speaker will likely be combined with PCB Mania Amazing Boost to make "Harmonic Boost" pedal.

Need:

  • 8 x 1590B
  • 1 x 1590N1
  • 3 x 1590BB

To do:

  • 8 x 1590B: acquiring, drilling, painting
  • 1 x 1590N1: acquiring, drilling, painting
  • 3 x 1590BB: acquiring, drilling, painting

Have:

  • none

Cool Widgets

Widget Count Type PCB Dimensions Enclosure Description
Incandenza 40 PCB 1-5/8" x 1-3/8"
40 mm x 31 mm		 N/A True Bypass Soft Switch
Latching Incandenza 5 PCB X" x X"
X mm x X mm		 N/A Low-Power True Bypass Soft Switch

If these relayed switches are cool enough, like the Fuzzdog HumStop, these could be put into many pedals. Uses 100,000-cycle Momentary Switch for True Bypass instead of conventional 3PDT which is only rated for 25,000 cycles. The internal electronic relay can go 200,000 to 500,000 cycles before needing replacement. This could make pedal switch maintenance much better and pedal switching much more pleasant. The pure relay takes about 50 millivolts, the latching relay uses almost zero. The latching relays will be used on those pedals that already have high power demands.

SubTotal Pedals = 13
Cumulative Total = 107

Electric Druid

Pedal Type PCB Dimensions Enclosure Included? Matched? Acquired? Encl. Etch? Drilled? Painted? Effect Etch Swirl
DigiDelay PCB 4-5/16" x 2-3/4"
109 mm x 70 mm		 1590BB X Yes No No No No Delay X
FilterFX PCB 4-3/8" x 2-3/4"
112 mm x 70 mm		 1590BB X Yes No No No No Filter X
Flangilicious PCB 4-3/16" x 1-7/8"
107 mm x 48 mm		 1590BB X Yes No No No No Flanger X
Hard Bargain PCB 3-7/8" x 1-11/16"
99 mm x 42 mm		 1590BB X Yes No No No No Distortion X

Need:

  • 4 x 1590BB

To do:

  • 4 x 1590BB: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 4
Cumulative Total = 111

Fuzzdog Pedals

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Alluring Echo PCB 2" x 2-5/16"
50 mm x 57 mm		 1590B X Yes No No No Echo X
Big Fluffy Pie (Bass Blender) PCB 50 mm x 50 mm 1590B X Yes No No No Bass Fuzz X
Black Ash Fuzz PCB 50 mm x 30 mm 1590B X Yes No No No Fuzz X
Cab Sim ROG Condor PCB 2" x 1-9/16
50 mm x 46 mm		 1590B X Yes No No No CabSim X
Cream Fluff Fuzz PCB 2" x 1-5/16"
50 mm x 33 mm		 1590B X Yes No No No Fuzz X
Dirt Dessert PCB 2" x 1/-13/16"
50 mm x 46 mm		 1590B X Yes No No No OD + Overtones X
Droid Fuzz Arpeggiator PCB main: 2-1/8" x 2"
main: 50 mm x 54 mm,
rotary pcb: 1-1/16" x 1-1/4"
rotary pcb: 32 mm x 27 mm		 1590B X Yes No No No Fuzz/Arpeggiator X
Eight Two Zero Drive PCB 50 mm x 50 mm 1590B X Yes No No No Overdrive X
Engineer's Thumb PCB 2" x 1-13/16"
50 mm x 47 mm		 1590B X Yes No No No Compressor X
Exploder Fuzz PCB 50 mm x 34 mm 1590B X Yes No No No Fuzz X
Fat-Ass Blooper PCB 50 mm x 50 mm 1590N1 (if works) X Yes No No No Mixer X
Fuzz Raw V1 PCB 50 mm x 50 mm 1590B X Yes No No No Fuzz X
GimpFX Ultr-Fk PCB 80 mm x 40 mm
80 x 20 mm		 1590BB X Yes No No No Bass Dist X
Graphic Fuzz PCB 2" x 3/4"
50 mm x 20 mm		 1590B X Yes No No No Fuzz X
Green Citrus Kit 50 mm x 46 mm 1590B X Yes No No No Distortion X
Harmonic Percolator PCB 2" x 7/8"
50 mm x 22 mm		 1590B X Yes No No No Fuzz+Filter X
HF Modulator PCB 2" x 1-7/8"
50 mm x 29 mm		 1590B X Yes No No No Bitcrusher X
Just the Meat PCB 25 mm x 22 mm 1590B X Yes No No No Boost X
Liquified Feline PCB 50 mm x 46 mm 1590B X Yes No No No Distortion X
No-Tube Driver PCB 2" x 1-5/8"
50 mm x 40 mm		 1590B X Yes No No No Overdrive X
Nuclear Fuzz PCB 2" x 2"
50 mm x 50 mm		 1590B X Yes No No No Fuzz X
Orange King PCB 2" x 1-7/16"
50 mm x 35 mm		 1590B X Yes No No No Distortion X
Reasonably Good Mangler PCB 50 mm x 40 mm 1590BB X Yes No No No Fuzz X
Recurring Nightmare Kit 3-3/16" x 2"
80 mm x 50 mm		 1590BB X Yes No No No Echo X
Repeater PCB 2" x 7/8"
50 mm x 22 mm		 1590B X Yes No No No Tremolo X
Sonic Tight'un PCB 2" x 15/16"
50 mm x 22 mm		 1590B X Yes No No No Distortion X
Spooky Mids PCB 2" x 1-3/8"
50 mm x 34 mm		 1590B X Yes No No No EQ X
Sunny-T Extreme PCB 2" x 1-5/16"
50 mm x 33 mm		 1590B X Yes No No No Distortion X
Sunny-T Extreme (+GPCB Sunn-T) PCB 2" x 1-5/16"
50 mm x 33 mm		 1590XX/J(?) X Yes No No No Distortion X
Tight White Drive PCB 50 mm x 40 mm 1590B X Yes No No No Overdrive X
Two Dozen Silvertones PCB 50 mm x 46 mm 1590B X Yes No No No Amp Emulator X
Verb Engine PCB 80 mm x 33 mm 1590BB X Yes No No No Reverb X
War Pig PCB 2" x 1-3/4"
50 mm x 44 mm		 1590B X Yes No No No Distortion X
Warp Sound PCB 2" x 1-3/16"
50 mm x 30 mm		 1590B X Yes No No No Distortion + Envelope X
Wolf Computer PCB 50 mm x 34 mm 1590BB X Yes No No No Fuzz X

Need:

  • 28 x 1590B
  • 1 x 1590N1
  • 5 x 1590BB
  • 1 x 1590XX (maybe a 1590J?)

To do:

  • 28 x 1590B: acquiring, drilling, painting
  • 1 x 1590BB: acquiring, drilling, painting
  • 5 x 1590BB: acquiring, drilling, painting
  • 1 x 1590XX (maybe a 1590J?): acquiring, drilling, painting

Have:

  • Nothing

Cool Widgets

Widget Count Type PCB Dimensions Enclosure Description
Cream Buffer 2 Buffer 1" x 1"
25 mm x 25 mm		 1090NS Pete Cornish transistor buffer
Inverting Buffer 3 Buffer 1-1/8" x 1"
28 mm x 25 mm		 1090NS Buffer w/ phase inversion
Klon Buffer 4 Buffer 1" x 7/8"
25 mm x 22 mm		 1090NS IC buffer from Klon
Hum Stop 20 Power Filter ??" x ??"
?? mm x ?? mm		 N/A Removes audible EMF hum

Need:

  • 8 x 1090NS

To do:

  • 8 x 1090NS: drilling, painting

Have:

  • 8 x 1090NS
SubTotal Buffers = 8
SubTotal Pedals = 35
Cumulative Total = 146

General Guitar Gadgets

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
BMP Civil War Kit 1590B X Yes No No No Fuzz X
BMP GGG Tuned Kit 1590B X Yes No No No Fuzz X
BMP Green Russian Kit 1590B X Yes No No No Fuzz X
BMP OpAmp Kit 1590B X Yes No No No Fuzz X
BMP Rams Head PCB 2-3/16" x 1-1/2"
55 mm x 38 mm		 1590B X Yes No No No Fuzz X
BMP Triangle Kit 1590B X Yes No No No Fuzz X
BrassMaster Kit 1590BB Yes Yes No Yes No Bass Fuzz X
Bronx Cheer PCB 1-5/8 x 1-3/16"
42 mm x 31 mm		 1590B X Yes No No No Fuzz+Filter X
BSIAB2 Kit 125B / 1590N1 Yes Yes No Yes Yes Distortion X
BSIAB2 Kit 1590B X Yes No No No Distortion X
BSIAB2 Kit 1590B X Yes No No No Distortion X
CB1 Kit 1590B Yes Yes No Yes No Boost X
ITS8 Kit 125B / 1590N1 Yes Yes No Yes Yes Overdrive X
Klon Centaur Kit Gorva 1590BB X Yes No No Yes Overdrive X
MBB Kit 125B / 1590N1 X No No No No Overdrive X
Mini Mixer Kit 125B / 1590N1 Yes Yes No Yes No Mixer X
Orange Squeezer Kit 1590B Yes Yes No Yes Yes Compressor X
Rodent PCB 2-1/8" x 1-7/16"
55 mm x 46 mm		 Custom X Yes No Yes Yes Distortion X
Scrabbler Kit 125B / 1590N1 X Yes No No No Oct/Fuzz X
Scrabbler Kit 125B / 1590N1 X Yes No No No Oct/Fuzz X
TOCT Kit Wahwah X Yes No No No Oct/Fuzz X
GGG Custom Wah PCB 2-1/8 x 1-3/4"
55 mm x 44 mm		 Wahwah X Yes No No No Wah X
GGG Custom Wah PCB 2-1/8 x 1-3/4"
55 mm x 44 mm		 Wahwah X Yes No No No Wah X

Need:

  • 1 x 1090NS matched (headphone amp)
  • 8 x 1590B
  • 5 x 125B / 1590N1
  • 2 x 1590BB
  • 3 x Wahwah
  • 1 x eBay Custom cheese wedge: acquiring, drilling, painting. TBD if not incl. TOCT on wah.

To do:

  • 1 x 1090NS: acquiring, drilling, painting
  • 8 x 1590B: acquiring, drilling, painting
  • 1 x 125B / 1590N1: painting
  • 2 x 125B / 1590N1: acquiring, drilling, painting
  • 1 x 1590BB: painting
  • 1 x Gorva 1590BB: drilling
  • 2 x Wah encl.: determine existing enclosure use vs all pedal PCBs

Have:

  • 1 x 1590B, drilled, painted (Orange Squeezer)
  • 1 x 125B / 1590N1: drilled, painted (BSIAB2)
  • 1 x 125B / 1590N1: drilled, (Mini Mixer)
  • 1 x 1590BB: drilled, (Brassmaster)
  • 1 x Gorva 1590BB: powder coated (Klon)
  • 1 x Rat pedal enclosure

NOTE: Rodent and TOCT were originally for rehousing in original enclosures. This may not work for TOCT since the Octavio is discontinued and therefore "cooler" now. TOCT should maybe go into a wah?

Cool Widgets

Widget Count Type PCB Dimensions Enclosure Description
Headphone Amp 1 PCB 2" x 1-3/16"
50 mm x 30 mm		 1090NS Headphone Mini-Amp
SubTotal Pedals = 23
Cumulative Total = 169

God City Instruments

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
6 Knob Compressor PCB 2-5/16" x 1-7/8"
58 mm x 35 mm		 1590N1 X Yes No No No Compressor X
Apostle PCB 3-1/16" x 2-9/16"
79 mm x 66 mm		 1590BB X Yes No No No Distortion X
Bass Brutalist PCB 2-5/16" x 1-7/8"
59 mm x 48 mm		 1590N1 X Yes No No No Distortion X
Bass Overdrive PCB 3-1/4" x 2-1/8"
82 mm x 55 mm		 1590BB X Yes No No No Distortion X
CTG PCB 3" x 2-3/8"
76 mm x 60 mm		 1590BB X Yes No No No Distortion X
HM2_v.NW PCB 3-1/4" x 2-3/16"
82 mm x 55 mm		 1590BB X Yes No No No Distortion X
MT2_v.NW PCB 3-1/4" x 2-3/16"
83 mm x 55 mm		 1590BB X Yes No No No Distortion X
Socialist Jr. PCB 3-3/8" x 1-7/8"
86 mm x 46 mm		 1590BB X Yes No No No Distortion X

Need:

  • 2 x 125B / 1590N1
  • 6 x 1590BB

To do:

  • 2 x 125B / 1590N1: acquiring, drilling, painting
  • 6 x 1590BB: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 8
Cumulative Total = 177

GrindCustoms FX

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Fluffgirl PCB 1590B X Yes No No No Envelope Filter X
Fluffgirl PCB 1590B X Yes No No No Envelope Filter X
Goat v3 PCB 1590B X Yes No No No Overdrive X
Machette PCB 1590N1 X Yes No No No Filter X
Ultrastoner PCB 1590B X Yes No No No Fuzz X

Need:

  • 4 x 1590B: matched
  • 1 x 125B / 1590N1: matched

To do:

  • 4 x 1590B: acquiring, drilling, painting
  • 1 x 125B / 1590N1: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 5
Cumulative Total = 182

GuitarPCB

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
4-Track Fuzz PCB 1-15/16" x 1-1/2"
50 mm x 38 mm		 1590B X Yes No No No Fuzz X
American Fuzz v3 PCB 1-7/8" x 1-1/2"
46 mm x 37 mm		 1590B X Yes No No No Fuzz X
Apollo Tremolo PCB 1-15/16" x 1-3/4"
49 mm x 45 mm		 Wahwah X Yes No No No Tremolo X
Dr. Rock v2 PCB 1-3/4" x 1-9/16"
44 mm x 39 mm		 1590B X Yes No No No Distortion X
G-02 Animal v1 PCB 2-3/16" x 2-5/16"
56 mm x 59 mm		 1590N1 Yes Yes No Yes Yes Fuzz X
G-02 Animal v1 PCB 2-3/16" x 2-5/16"
56 mm x 59 mm		 1590N1 Yes Yes No Yes Re-do Fuzz X
Mastodon Fuzz v2a PCB 1-7/16" x 1-3/8"
36 mm x 35 mm		 1590B X Yes No No No Fuzz x
MoWah v3 PCB 2-1/16" x 2"
53 mm x 50 mm		 Wahwah X Yes No No No Wahwah X
OMG Mongoose Fuzz v3 PCB 1-5/8" x 1-3/8"
42 mm x 35 mm		 1590B X Yes No No No Fuzz X
Sriracha Fuzz Kit 1590B Yes (125B) Yes No No No Fuzz X
Sunn-T Preamp PCB 1-15/16" x 1-11/16"
49 mm x 43 mm		 1590BB X Yes No No No Distortion X
Sunn-T Preamp*
(+Fuzzdog Sunny-T)		 PCB 1-15/16" x 1-11/16"
49 mm x 43 mm		 1590XX (already counted) X Yes No No No Amp Emulator X
Tone Tweq PCB 2" x 1-1/4"
50 mm x 32 mm		 1590B X Yes No No No Tone Control X

(*) = Not a pedal. Could be for making a builder/tester tool, or be serving as a constituent part to a pedal.

Need:

  • 7 x 1590B: matched
  • 3 x 1590N1: matched
  • 1 x 1590BB: matched
  • 2 x Wahwah: matched

To do:

  • 7 x 1590B: acquiring, drilling, painting
  • 1 x 1590N1: painting
  • 1 x 1590N1: acquiring, drilling, painting
  • 1 x 1590BB: acquiring, drilling, painting
  • 2 x Wahwah: acquiring, drilling, painting

Have:

  • 2 x 1590N1: ready

Cool Widgets

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Paramix v4* PCB 2-1/8" x 1-3/4"
53 mm x 44 mm		 1590N1 X Yes No No No 2-Loop Mixer X
SubTotal Pedals = 12 (+Sunn-T will be combined w/ Fuzzdog Total Sonic Distortion so not counted)
Cumulative Total = 194

Jed's Peds

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Double SHO Crackle Boost PCB 1: 1" x 13/16"
1: 25 mm x 21 mm
2: 1" x 13/16"
2: 25 mm x 21 mm		 1590B X Yes No No No Boost X
Double SHO Crackle Boost PCB 1: 1" x 13/16"
1: 25 mm x 21 mm
2: 1" x 13/16"
2: 25 mm x 21 mm		 1590B X Yes No No No Boost X
Hot Harmonics PCB 1-13/16" x 1-7/16"
46 mm x 35 mm		 1590B X Yes No No No Distortion X
Mysheen PCB 1-15/16" x 1-7/16"
49 mm x 37 mm		 1590B X Yes No No No Distortion X
Supreaux Deux PCB 2" x 1-1/8"
50 mm x 29 mm		 1590B X Yes No No No Overdrive X

Need:

  • 5 x 1590B

To do:

  • 5 x 1590B: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 5
Cumulative Total = 199

JMK PCBs

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Blue Warbler 2 PCB 1-15/16" x 1-9/16"
49 mm x 39 mm		 1590B X Yes No No No Tremolo X
Expandora PCB 2-1/4" x 1-9/16"
57 mm x 40 mm		 1590N1 X Yes No No No Distortion X
Hoodoo Drive PCB 1-15/16" x 1"
50 mm x 25 mm		 1590B X Yes No No No Overdrive X
Level Up PCB 2-3/16" x 1-3/16"
56 mm x 31 mm		 1590N1 X No No No No Octave Fuzz X
Modulay PCB 1-15/16" x 1-15/16"
50 mm x 50 mm		 WahWah X No No No No Delay/Echo X

Need:

  • 2 x 1590B
  • 2 x 1590N1
  • 1 x WahWah

To do:

  • 2 x 1590B: acquiring, drilling, painting
  • 2 x 1590N1: acquiring, drilling, painting
  • 1 x WahWah: acquiring, drilling, painting

Have:

  • none

Cool Widgets

Widget Count Type PCB Dimensions Enclosure Description
Testing Rig 1 PCB 3-1/16" x 1-7/8"
77 mm x 47 mm		 1590BBFL Circuit Tester w/ Listen Probe
Tiny Tester 2 PCB 15/16" x 1-1/16"
20 mm x 23 mm		 1590GFL Test Tone Oscillator

Need:

  • 1 x 1590BBFL
  • 1 X 1590BFL / 1590GFL

To do:

  • 1 x 1590BBFL: acquiring, drilling, painting
  • 1 x (1590BFL / 1590GFL? for Tiny Tester and Madbean Road Rage?)

Have:

  • 1 x 1590BBFL
  • 1 x 1590GFL - Need to see if Tiny Tester / Road Rage combo will fit?

NOTE: "Ultra Tester" / Oscillator projects are to assist in building other pedals: Combination of JMKPCBs Testing Rig / Tiny Testers and Madbean Road Rages

SubTotal Pedals = 5
Cumulative Total = 204

Lectric-FX

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Altered State PCB 1590BB X No No No No Phaser X
Bloodstone PCB 1590BB X No No No No Phaser X
Celeste Chorus PCB 1590BB X No No No No Chorus X
Countdown PCB 1590XX X No No No No Phaser X
Dandy Horse PCB 1590XX X No No No No Flanger X
DC-Echo PCB 1590XX X No No No No Delay X
Downtown PCB 1590XX X No No No No Fuzz/Octaver X
Flintlock PCB 1590BB X No No No No Flanger X
Flyleaf PCB 1590BB X No No No No Envelope Follower X
Mongrel OD PCB 1590B X No No No No Fuzz Overdrive X
Old Chap PCB 1590BB X No No No No Flanger X
Pork Rind PCB 1590B X No No No No Fuzz Octave (Superfuzz) X
Soy Sauce PCB 1590N1 X No No No No Subharmonizer X
Zirconia PCB 1590N1 X No No No No Delay X

Need:

  • 2 x 1590B
  • 2 x 1590N1
  • 4 x 1590BB
  • 4 x 1590XX

To do:

  • 2 x 1590B: acquiring, drilling, painting
  • 2 x 1590N1: acquiring, drilling, painting
  • 4 x 1590BB: acquiring, drilling, painting
  • 4 x 1590XX: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 14
Cumulative Total = 218

Madbean Pedals

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Archibald PCB main: 3-5/16" x 4"
main: 86 mm x 102 mm,
tube pcb: 15/16"
tube pcb: 22 mm x 31 mm		 125BB / 1590BB2 X Yes No No No Tube Overdrive X
Bloviator PCB 1-7/8" x 1-5/16"
48 mm x 34 mm		 1590B X Yes No No No Tone Control X
Blue Steel PCB 2-5/16" x 2-7/8"
59 mm x 78 mm		 1590N1 X Yes No No No Overdrive X
Bumblebee PCB 1-15/16" x 1-15/16"
50 mm x 50 mm		 1590B X Yes No No No Fuzz X
Burly Bear PCB 3-3/8" x 2-1/2"
86 mm x 64 mm		 1590BB X Yes No No No Fuzz X
Current Lover PCB 3-5/16" x 2-13/16"
85 mm x 71 mm		 1590BB X Yes No No No Flanger X
Dragonbeard PCB 3-5/16" x 2-1/2"
85 mm x 67 mm		 1590BB X Yes No No No Distortion X
Dragon Hound PCB 1: 2-3/16" x 2"
1: 55 mm x 57 mm
2: 2-1/8" x 1-3/16"
2: 54 mm x 36 mm		 1590B X Yes No No No Overdrive/Distortion X
Edgelord PCB main: 3-3/8" x 3-3/8"
main: 87 mm x 87 mm,
rotary pcb: 1-1/8" x 1-3/8"
rotary pcb: 28 mm x 34 mm		 1590BB X Yes No No No Bass Synth X
Exploder PCB 2-1/8" x 2-3/8"
53 mm x 61 mm		 1590B X Yes No No No Oct/Fuzz X
Flabulanche PCB 2" x 2-5/16"
50 mm x 59 mm		 1590B X Yes No No No Overdrive X
Freekout PCB 2-5/16" x 3-1/16"
59 mm x 77 mm		 1590N1 X Yes No No No RingMod X
Fuzzy Britches PCB 2-1/8" x 1-3/8"
54 mm x 35 mm		 1590B X Yes No No No Fuzz X
Gas Tank PCB 2-5/16" x 2-11/16"
59 mm x 68 mm		 1590N1 X Yes No No No Bass Overdrive X
Glitchee PCB 2-5/16" x 3-1/16"
58 mm x 78 mm		 1590N1 X Yes No No No OD + SubOctave + Filter X
Green Bean PCB 1-15/16" x 2"
50 mm x 50 mm		 1590B X Yes No No No Overdrive X
Green Bean PCB 1-15/16" x 2"
50 mm x 50 mm		 1590B X Yes No No No Overdrive X
Harbinger TWO PCB 2-3/4" x 3-5/8"
69 mm x 92 mm		 Wahwah X Yes No No No Univibe X
Honeydripper PCB 2-5/16" x 3-5/16"
60 mm x 85 mm		 1590N1 X Yes No No No Vocal Filter X
Junk Trunk PCB 2-5/16" x 2-7/8"
59 mm x 75 mm		 1590N1 X Yes No No No Bass Enveloper X
Karate Shop PCB 1-15/16" x 1-15/16"
50 mm x 50 mm		 1590B X Yes No No No Tone Control X
The Laureate PCB 2-5/8" x 3-3/8"
59 mm x 85 mm		 1590N1 X Yes No No No Overdrive X
Mandroid PCB 4-3/8" x 1-5/8"
112 mm x 41 mm		 1590BB X Yes No No No Bitcrusher X
Mandroid PCB 4-3/8" x 1-5/8"
112 mm x 41 mm		 1590BB X Yes No No No Bitcrusher X
MeatQlaw PCB 2-1/8" x 2-3/8"
53 mm x 59 mm		 1590B X Yes No No No Boost X
Mysterioso PCB 2-5/16" x 2-3/4"
60 mm x 70 mm		 1590N1 X Yes No No No Overdrive X
Naughty Fish PCB 2-1/8" x 2-13/16"
55 mm x 72 mm		 1590B X Yes No No No Envelope Filter X
Peacekeeper PCB 2" x 1-13/16"
50 mm x 46 mm		 1590B X Yes No No No Distortion X
RangeMaster PCB 2" x 1-3/4"
50 mm x 44 mm		 1590B X Yes No No No Boost X
Rough Cut PCB 2-13/16" x 2-5/16"
77 mm x 59 mm		 1590N1 X No No No No Compressor X
Rustbucket PCB 4-1/4" x 3"
109 mm x 77 mm		 1590BB X Yes No No No Volume Swell X
Sharkfin PCB 3-3/8" x 2-3/8"
85 mm x 60 mm		 1590BB X Yes No No No Filter Sample X
Tone Virus PCB 3-7/16" x 3"
87 mm x 76 mm		 1590BB X No No No No PLL-Synth X
Total Recall PCB main: 3-5/16" x 3-7/8"
main: 85 mm x 98 mm,
extra bbd: 1-13/16" x 1-1/4"
extra bbd: 46 mm x 32 mm		 1590BB X Yes No No No Delay X
Weener Wah PCB 1-15/16" x 2-1/4"
50 mm x 57 mm		 Wahwah X Yes No Maybe? Maybe? Wahwah X

Need:

  • 12 x 1590B
  • 9 x 1590N1
  • 10 x 1590BB
  • 1 x 125BB / 1590BB2
  • 2 x Wahwah

To do:

  • 11 x 1590B: acquiring, drilling, painting
  • 9 x 1590N1: acquiring, drilling, painting
  • 10 x 1590BB: acquiring, drilling, painting
  • 1 x 125BB / 1590BB2: acquiring, drilling, painting
  • 2 x Wahwah: acquiring, drilling, painting, treadle-grip

Have:

  • None

Cool Widgets

Madbean power board (Road Rage) was first was purchased to be combined with JMKPCBs Testing Rig. Recognized need for 12v power and bought more for a total of 15 in case additional power needs arose. Will keep extra on hand to make 12v and 15v power supplies as necessary.

Widget Count Type PCB Dimensions Enclosure Description
Road Rage 15 Power ?? x ?? N/A +12-+15/18v Power Supply
9mm BBoard Pot Adapter 75 Pot Adapter ?? x ?? N/A 9mm Pot easy-use for Breadboard
14mm Illuminated Pot Adapter 4 Pot Adapter ?? x ?? N/A For Glowy Dials on Pedals
1/8" Audio Jack 6 PCB Mount ?? x ?? N/A Audio jack mounts for 1/8" headphone plubs

Notes:

  • 1 x Road Rage to be combined with JMKPCBs Testing Rig
  • 1 x Road Rage to be combined with JMKPCBs Test Oscillator
  • 1 x Road Rage to be combined with Fuzzdog's JTM Boost for 9v/18v switch
  • 12 x Road Rage boards kept in reserve
SubTotal Pedals = 35
Cumulative Total = 251

Mask Audio Electronics

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Iommic Boost PCB XX" x XX"
XX mm x XX mm		 1590B X Yes No No No Boost X
Shattered Glass PCB XX" x XX"
XX mm x XX mm		 1590XX X Yes No No No State Variable Filter X
T-Amp PCB XX" x XX"
XX mm x XX mm		 1590B X Yes No No No Distortion X

Need:

  • 2 x 1590B
  • 1 x 1590XX

To do:

  • 1 x 1590B: acquiring, drilling, painting
  • 1 x 1590XX: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 3
Cumulative Total = 254

MusicPCB

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Gristleizer PCB 3-1/4" x 2-1/16"
83 mm x 563 mm		 1590BB X Yes No No No Tremolo X
Meat Sphere PCB 5" x 2-5/16"
127 mm x 59 mm		 1590XX X Yes No No No Envelope Filter X
Uglyface PCB 2" x 1-7/8"
51 mm x 36 mm		 1590B X Yes No No No Fuzz X

Need:

  • 1 x 1590B
  • 1 x 1590BB
  • 1 x 1590XX

To do:

  • 1 x 125B: acquiring, drilling, painting
  • 1 x 1590BB: acquiring, drilling, painting
  • 1 x 1590XX: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 3
Cumulative Total = 257

OLCircuits

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Dr. Watt Kit 1590BB Yes Yes No Yes No Amp Emulator X
Flipster Kit 1590BB Yes Yes No Yes No Amp Emulator X
Orange Peel Kit 1590BB Yes Yes No Yes No Amp Emulator X
Slow Century Kit 1590BB Yes Yes No Yes No Amp Emulator X

Need:

  • 1 x 1590N1
  • 4 x 1590BB

To do:

  • 1 x 1590N1: acquiring, drilling, etching, painting
  • 4 x 1590BB: etching, painting

Have:

  • 4 x 1590BB: acquired, drilled

Cool Widgets

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Tube Cricket* Kit 1590N1 X Yes No No No Mini-Amp X

NOTE: Tube Cricket Pedal in a 1590N1 is much "cooler" than the 1590BB it came with. Going to get and drill a 1590N1. The Tube Cricket is technically a mini-amp, not a pedal and so cannot be counted as such.

SubTotal Pedals = 4
Cumulative Total = 258

Parasit Studio

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
0415 Guitar Synth PCB 1-15/16" x 2"
49 mm x 50 mm		 1590B X Yes No No No Octave X
0415 Guitar Synth PCB 1-15/16" x 2"
49 mm x 50 mm		 1590B X Yes No No No Octave X
The Corruptor PCB 1-7/8" x 1-11/16"
47 mm x 43 mm		 1590B X Yes No No No RingMod X
Darkadiator PCB 3-1/16" x 2-1/4"
77 mm x 57 mm		 1590BB X Yes No No No Oct/Fuzz X
Into the Unknown PCB 3-3/8" x 2-3/4"
86 mm x 69 mm		 1590BB X Yes No No No Synth X
Multiwave Guitar Synth PCB 2-3/16" x 2-1/2"
55 mm x 54		 1590B X Yes No No No Synth X
New Wave CV Generator PCB 3-3/8" x 3-1/8"
86 mm x 80 mm		 1590BB X Yes No No No Control Voltage X
Quantum Defrakulator Mk3 PCB 4-1/4" x 2-3/4"
109 mm x 70 mm		 BBDD?(JJ?) X Yes No No No Synth X
Sentient Machine PCB 2-3/8" x 2-7/8"
60 mm x 72 mm		 1590N1 X Yes No No No Phaser X
The Sidescroller PCB 2-3/16" x 2-1/4"
55 mm x 57 mm		 1590B X Yes No No No Oct/Fuzz X
Sonic Reducer PCB 1-13/16" x 1-3/4"
46 mm x 44 mm		 1590B X Yes No No No BitCrusher X
Theremin Fuzz PCB 1-7/8" x 1-15/16"
48 mm x 50 mm		 1590B X Yes No No No Fuzz X
Theremin Fuzz PCB 1-7/8" x 1-15/16"
48 mm x 50 mm		 1590B X Yes No No No Fuzz X
The Xor'cist PCB 3-3/8" x 1-15/16"
87 mm x 49 mm		 1590BB X Yes No No No Distortion X
The Xor'cist PCB 3-3/8" x 1-15/16"
87 mm x 49 mm		 1590BB X Yes No No No Distortion X
The Xor'cist PCB 3-3/8" x 1-15/16"
87 mm x 49 mm		 1590BB X Yes No No No Distortion X

Need:

  • 8 x 1590B
  • 1 x 1590N1
  • 7 x 1590BB

To do:

  • 8 x 1590B: acquiring, drilling, painting
  • 1 x 1590N1: acquiring, drilling, painting
  • 7 x 1590BB: acquiring, drilling, painting

Have:

  • none

Cool Widgets

Widget Count Type PCB Dimensions Enclosure Description
Mod Board 2 PCB 1-1/4" x 1-5/16"
31 mm x 34 mm		 N/A Warble different effects
RC Box 2 PCB 4-7/8" x 4-1/16"
125 mm x 104 mm		 1590XX(?) Part Substitution and Circuit Test Box

We thought the mod boards would be perfect for the Theremin Fuzzes as the "spooky 1950s" sound of B-grade horror movies typically involved a warbling theremin and we thought it would be cool to recreate this effect even though we plan on building our own theremin too! The RC Boxes are like vintage Resistor/Capacitor decade boxes, but even more functional than those decade boxes as with Parasit Studio RC Boxes you can also chain the resistors and capacitors into both RC or CR filters.

SubTotal Pedals = 16
Cumulative Total = 274

PCB Mania

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Amazing Booster* PCB X" x X"
X mm x X mm		 X X No No No No Boost X
Amped S-Bass PCB 3-5/16" x 2-11/16"
84 mm x 68 mm		 1590BB X Yes No No No Amp Emulator X
Appetite for Distortion PCB 2-5/16" x 2"
59 mm x 50 mm		 1590N1 X Yes No No No Amp Emulator X
Atom Boost PCB 1-7/8" x 1-7/16"
48 mm x 36 mm		 1590B X Yes No No No Boost X
Black Sun of Doom PCB 3-3/16" x 2-5/8"
81 mm x 68 mm		 1590BB X Yes No No No Amp Emulator X
Clockwork Orange PCB 3-7/8" x 1-5/8"
99 mm x 41 mm		 1590BB X Yes No No No Amp Emulator X
Death by Flaming Ring PCB 2-5/16" x 2-11/16"
58 mm x 69 mm		 1590N1 X Yes No No No Ring Mod X
Death by Fuzz I PCB 1-7/8" x 2"
48 mm x 51 mm		 1590B X Yes No No No Fuzz X
Death by Fuzz III PCB 4-7/16" x 2-1/2"
112 mm x 63 mm		 1590BB X Yes No No No Fuzz X
Dwarf Destroyer PCB 2" x 1-5/8"
51 mm x 40 mm		 1590B X Yes No No No Fuzz X
Electric Lover PCB 3-1/4" x 2-5/8"
82 mm x 68 mm		 1590BB X Yes No No No Flanger X
Engl Preamp PCB X" x X"
X mm x X mm		 X X X No No No Amp Emulator X
Fuzz-Phase PCB 3-7/8" x 2-11/16"
86 mm x 69 mm		 1590BB X Yes No No No Fuzz / Phaser? X
Green Lemon PCB 2-5/16" x 1-13/16"
58 mm x 46 mm		 1590N1 X Yes No No No Amp Emulator X
Green Octaver PCB 1-3/8" x 1-1/4"
36 mm x 31 mm		 1590B X Yes No No No Octave X
Hyperion Fuzz PCB 2-5/16" x 3-1/2"
59 mm x 89 mm		 1590N1 X Yes No No No Fuzz X
JCM-800 PreAmp Simulator PCB 2-3/8" x 1-7/8"
61 mm x 47 mm		 1590N1 X Yes No No No Distortion X
JFT Phaser PCB 4-5/16" x 3-13/16"
109 mm x 160 mm		 1590XX X Yes No No No Phaser X
Kheiron Klon PCB 4-7/16" x 2-3/8"
112 mm x 61 mm		 1590BB X Yes No No No Overdrive X
Lemon Bass PCB 2-5/16" x 2-5/8"
59 mm x 67 mm		 1590N1 X Yes No No No Amp Emulator X
Lemon Rockverb PCB 2-3/16" x 2"
55 mm x 50 mm		 1590N1 X Yes No No No Amp Emulator X
Power Engl PCB X" x X"
X mm x X mm		 X X X No No No Amp Emulator X
Samurai Sword* PCB X" x X"
X mm x X mm		 X X No No No No Boost X
Slava Ukraine PCB 6-1/4" x 2-1/2"
160 mm x 65 mm		 Wah(?) X Yes No No No Wah-Fuzz-Tremolo X
Slava Ukraine PCB 6-1/4" x 2-1/2"
160 mm x 65 mm		 Wah(?) X Yes No No No Wah-Fuzz-Tremolo X
Soldado Preamp PCB 2-5/16"1-15/16"
59 mm x 50 mm		 1590N1 X Yes No No No Amp Emulator X
Soviet Drive PCB 2-5/16" x 2-3/4"
58 mm x 69 mm		 1590N1 X Yes No No No Overdrive/Distortion X
Sunn Beta Lead PCB 3-5/8" x 3-5/8"
86 mm x 86 mm		 1590BB X Yes No No No Amp Emulator X
Uberknall & Amp Tone Stack PCB X" x X"
X mm x X mm		 X X X No No No Amp Emulator X
Uberknall Preamp PCB X" x X"
X mm x X mm		 X X X No No No Amp Emulator X
Wolfgang 5051 PCB X" x X"
X mm x X mm		 X X Yes No No No Amp Emulator X
Zombie Choir II PCB 2-3/16" x 2-3/16"
56 mm x 56 mm		 1590BB X Yes No No No Chorus X

(*) = Not a pedal. Could be for making a builder/tester tool, or be serving as a constituent part to a pedal.

Need:

  • 3 x 1590B
  • 9 x 1590N1
  • 8 x 1590BB
  • 1 x 1590XX
  • 2 x Wahwah

To do:

  • 3 x 1590B: acquiring, drilling, painting
  • 9 x 1590N1: acquiring, drilling, painting
  • 8 x 1590BB: acquiring, drilling, painting
  • 1 x 1590XX: acquiring, drilling, painting
  • 2 x Wahwah: acquiring, drilling, painting

Have:

  • none

Cool Widgets

Widget Count Type PCB Dimensions Enclosure Description
Green Octaver 1 PCB 1-3/8" x 1-1/4"
36 mm x 31 mm		 N/A Octave Up

This is a PC board for the Armstrong Green Ringer. We may include/combine it into a pedal if it strikes us as a good idea. If, after testing, the inclusion actually ends up making a pedal better, we'll keep it in there.

EQ Development Pack

This isn't a pedal, but we're having to do all the same work that we would have to do on order to build a pedal, so we're going to include it here.

PCB Mania offers all their tone control stack PCBs in a single discounted package, and we while the question of whether we're stupid or not for buying this pack, we bought it anyway. It seems to us that the best way to use these would be to package them together in a single enclosure for circuit development efforts. So we're building out these PCBs and combining them in a single enclosure. This is so we can make all of these different tone stacks available in a selectable manner. The idea is to make new tone shaping options accessible for use or interaction with any effects, including preamps where we may wish to apply different tone stacks for new tonal textures.

Widget Count Type PCB Dimensions Enclosure Description
Active EQ 1 PCB 2-5/16" x 1-1/4"
59 mm x 32 mm		 TBD Tone Stack
Amp Tone Stack & Gain Recovery 1 PCB 2-5/16" x 1-1/8"
59 mm x 29 mm		 TBD Tone Stack
Benzin EQ 1 PCB 2-5/16" x 1-7/16"
59 mm x 36 mm		 TBD Tone Stack
Falcon EQ 1 PCB 2-3/8" x 1-1/4"
60 mm x 32 mm		 TBD Tone Stack
Hybrid EQ 1 PCB 2-5/8" x 1-5/16"
59 mm x 33 mm		 TBD Tone Stack

We always try to match the smallest enclosure possible taking into consideration the PCB and any controls that need to be fitted. Given preliminary attempts to match out the PCBs to the optimal enclosure, right now the 1550G appears to be a reasonable size. In this case, obtaining a 5-pole 5-throw rotary switch (to switch power in/out, signal in/out, and an "active" indicator to select between the various tone stack PCBs) seems to be forcing us into the larger enclosures that Hammond makes. Vertical alignment of the PCBs in the enclosure appears to make a smaller enclosure possible. The 6P5T rotary we were able to find at a reasonable price is deeper (about 2 inches total) than any other rotaries we've spec'ed out for a build.

Need:

  • 1 x 1550G

To do:

  • 1 x 1550G: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 30
Cumulative Total = 304

Pedal PCB

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Acid Rain Fuzz PCB 1590N1 X Yes No No No Fuzz X
Aphrodite Overdrive PCB 1590N1 X Yes No No No Overdrive X
Backfeeder PCB 1590BB / Wah X Yes No No No Distortion / Feedback X
Black Tiger Boost PCB 1590B X Yes No No No Boost X
Bolide Distortion PCB 1590N1 X Yes No No No Distortion X
Boogie Monster PCB 1590N1 X Yes No No No Distortion X
BuGGFX Daydream PCB 1590N1 X Yes No No No Multiband Delay X
BuGGFX Raincoat PCB 1590N1 X Yes No No No Distortion X
Buzz Tone Fuzz PCB 1590N1 X Yes No No No Fuzz X
Chaos Machine PCB 1590XX X Yes No No No Multi-Modulator X
Clandestine Preamp PCB 1590N1 X Yes No No No Preamp X
Cleric Fuzz PCB 1590N1 X Yes No No No Fuzz X
Closed Circuit Booster Limiter PCB 1590N1 X Yes No No No Tone Filter X
Closed Circuit Booster Limiter PCB 1590N1 X Yes No No No Tone Filter X
Deflector Reverb PCB 1590N1 X Yes No No No Reverb X
Double Pendulum PCB 1590BB X Yes No No No Tremolo X
Duocast PCB 1590BBM X Yes No No No Preamp X
Kickstart Distortion PCB 1590N1 X Yes No No No Distortion X
Low Tide Modulator PCB 1590BB X Yes No No No Overdrive X
Lycan Overdrive PCB 1590N1 X Yes No No No Distortion X
M800 Overdrive PCB 1590N1 X Yes No No No Overdrive X
Mean Green Metal Machine PCB 1590N1 X Yes No No No Distortion X
Mojito Deluxe Overdrive PCB 1590N1 X Yes No No No Overdrive X
Mojito Deluxe Overdrive PCB 1590N1 X Yes No No No Overdrive X
Mystery Machine PCB 1590BB X Yes No No No Overdrive X
Parasite Wah PCB Wah-wah X Yes No No No Wah-Wah X
Parasite Wah PCB Wah-wah X Yes No No No Wah-Wah X
Pharmacist Overdrive PCB 1590BB X Yes No No No Overdrive X
Radium Springs PCB 1590N1 X Yes No No No Reverb X
Son of Ben Preamp PCB 1590N1 X Yes No No No Preamp X
Son of Ben Preamp PCB 1590N1 X Yes No No No Preamp X
Sorcerer PCB 1590N1 X Yes No No No Distortion X
Sorcerer PCB 1590N1 X Yes No No No Distortion X
Sproing Deluxe Reverb PCB 1590BB X Yes No No No Reverb X
TearJerker Wah PCB Wah-wah X Yes No No No Wah-Wah X
Thermionic Deluxe PCB 1590XX X Yes No No No Dual Distortion X
Tyrian Distortion PCB 1590N1 X Yes No No No Distortion X
UniCab PCB 1590N1 X Yes No No No Cabinet Emulator X
Unison Double Tracker PCB 1590N1 X Yes No No No Modulated Reverb X
Valhalla Distortion PCB 1590N1 X Yes No No No Distortion X
Viceroy Overdrive PCB 2.35" × 2.3" 1590N1 X Yes No No No Overdrive X

Need:

  • 1 x 1590B
  • 9 x 1590N1
  • 1 x 1590BB
  • 2 x 1590XX
  • 3 x Wah

To do:

  • 1 x 1590B: acquiring, drilling, painting
  • 9 x 1590N1: acquiring, drilling, painting
  • 1 x 1590BB: acquiring, drilling, painting
  • 2 x 1590XX: acquiring, drilling, painting
  • 3 x Wah-wah: acquiring, drilling, painting

Have:

  • none

Cool Widgets

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Intelligent Relay Bypass Module (10) PCB 1590N1 X Yes No No No Overdrive X
SubTotal Pedals = 41
Cumulative Total = 345

Rullywow

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Arcadiator PCB 3-5/16" x 1-7/8"
84 mm x 48 mm		 1590BB X Yes No No No Oct/Fuzz X
Canned Yam PCB 1-15/16" x 1-5/8"
49 mm x 42 mm		 1590B X Yes No No No Bass Preamp X
Chugga Preamp PCB 1-15/16" x 1-1/2"
48 mm x 38 mm		 1590B X Yes No No No Boost X
Demented Compressor PCB 1-15/16" x 1-5/8"
48 mm x 41 mm		 1590B X Yes No No No Compressor X
Serpent Boost PCB 15/16" x 1-1/4"
23 mm x 33 mm		 1590B X Yes No No No Boost X
Superjudge PCB 1-11/16" x 1-7/16"
49 mm x 37 mm		 1590B X Yes No No No Distortion X
Tremolow PCB 1-7/8" x 1-3/8"
48 mm x 35 mm		 1590B X Yes No No No Tremolo X

Need:

  • 3 x 1590B
  • 1 x 1590BB

To do:

  • 3 x 1590B: acquiring, drilling, painting
  • 1 x 1590BB: acquiring, drilling, painting

Have:

  • none
SubTotal Pedals = 7
Cumulative Total = 352

TH Custom

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
3-Band Parametriq EQ PCB 3-5/16" x 1-7/8"
84 mm x 48 mm		 1590BB X Yes No No No Tone Filter X
The Devil PCB 1-15/16" x 1-5/8"
49 mm x 42 mm		 1590B X Yes No No No Distortion X
Merlin's Equinox II PCB 1-15/16" x 1-1/2"
48 mm x 38 mm		 1590B X Yes No No No Reverb X
Merlin's Glassblower PCB 1-15/16" x 1-1/2"
48 mm x 38 mm		 1590B X Yes No No No Boost X
Merlin's Small Time PCB 1-15/16" x 1-1/2"
48 mm x 38 mm		 1590B X Yes No No No Echo X
Merlin's U-Boat PCB 1-15/16" x 1-1/2"
48 mm x 38 mm		 1590B X Yes No No No Octave X
ROG Ginger PCB 1-15/16" x 1-5/8"
48 mm x 41 mm		 1590B X Yes No No No Amp Emulator X
ROG Supreaux-Deux PCB 1-15/16" x 1-5/8"
48 mm x 41 mm		 1590B X Yes No No No Amp Emulator X
ROG Thor PCB 1-15/16" x 1-5/8"
48 mm x 41 mm		 1590B X Yes No No No Amp Emulator X
ROG Trivibe PCB 1-15/16" x 1-5/8"
48 mm x 41 mm		 1590B X Yes No No No Amp Emulator X
ROG Umble PCB 1-15/16" x 1-5/8"
48 mm x 41 mm		 1590B X Yes No No No Amp Emulator X
Tube Driver PCB 3-5/16" x 1-7/8"
84 mm x 48 mm		 1590BB X Yes No No No Tube Overdrive X
Valv-e-tizer PCB 3-5/16" x 1-7/8"
84 mm x 48 mm		 1590BB X Yes No No No Tube Overdrive X

Need:

  • 3 x 1590B
  • 1 x 1590BB

To do:

  • 3 x 1590B: acquiring, drilling, painting
  • 1 x 1590BB: acquiring, drilling, painting

Have:

  • none

Cool Widgets

Widget Type PCB Dimensions Effect
1-Band Parametriq EQ PCB 3-5/16" x 1-7/8"
84 mm x 48 mm		 Widget
10 Watt Amp x2 PCB 3-5/16" x 1-7/8"
84 mm x 48 mm		 Widget
Headphone Amp & Stereo Sim x2 PCB 1-15/16" x 1-1/2"
48 mm x 38 mm		 Widget
MadBox PCB 1-15/16" x 1-5/8"
49 mm x 42 mm		 Widget
Mini Headphone Extension x3 PCB 1-15/16" x 1-1/2"
48 mm x 38 mm		 Widget
Parallel Mixer-Splitter PCB 1-15/16" x 1-5/8"
49 mm x 42 mm		 Widget
Pro-cessor PCB 1-15/16" x 1-5/8"
48 mm x 41 mm		 Widget
SubTotal Pedals = 13
Cumulative Total = 365

Miscellaneous

Pedal Type PCB Dimensions Enclosure Included? Matched? Encl. Etch? Drilled? Painted? Effect Etch Swirl
Diablado PCB 3-7/8" x 3-1/16"
98 mm x 77 mm		 1590BB X Yes No No No Reverb X
Fake Klon 1 Silver Enclosure ?? "Classic Klon" X Yes No No No ??? X
Fake Klon 2 Gold Enclosure ?? "Classic Klon" X Yes No No No ??? X
Harmonic Boost 2 Boards ?? Speaker Cranker & JFet Boost X Yes No No No Dual Boost X
Sunn-T: Full Eclipse 2 Boards 3-7/8" x 3-1/16"
98 mm x 77 mm		 1590XX? X Yes No No No Full Amp Stack X
Time Machine Boost 2 Boards ?? Dual-Boost X Yes No No No Dual Boost X

Need:

  • 1 x 1590J (?)

To do:

  • 1 x 1590J: acquiring, drilling, painting

Have:

  • 1 x Silver Klon enclosure
  • 1 x Gold Klon enclosure
SubTotal Pedals = 6
Cumulative Total = 371

Outstanding Stuff

  • Total: 370 pedals to be completed

Extra Parts

Requiring Enclosures:

  • 2 x Fuzzdog Creme Buffer PCBs
  • 2 x Fuzzdog Inverting Buffer PCBs
  • 4 x Fuzzdog Klon Buffer PCBs

Included in pedals:

  • 70 x Fuzzdog Humstop mini-PCBs
  • 1 x Fuzzdog stomp switch mini-PCB
  • 1 x GGG 4PDT slide-switch
  • 2 x GGG 6-way capacitor selector-PCBs
  • 3 x GPCB toggle switch selector-PCBs
  • 2 x GPCB roto-tone switch selector-PCBs
  • 2 x GPCB stomp switch mini-PCBs
  • 3 x GrindFX stomp mini-PCBs
  • 2 x Parasit Mod mini-PCBs

Enclosures

Need:

  • 72 x 1590B
  • 31 x 1590N1
  • 37 x 1590BB
  • 1 x 1590BBFL
  • 1 x 1590Q
  • 3 x 1590XX
  • 1 x 1590D
  • 3 x 1590DD
  • 2 x 1550G
  • 1 x 1456KH3BKBK
  • 9 x 1090NS (Done)
  • 7 x Wah enclosures
  • 600 x Hammond anti-tamper screws

Have:

  • 69 x 1590B (Done)
  • 16 x 125B (pre-drilled)
  • 15 x 1590N1
  • 37 x 1590BB (Done)
  • 1 x 1590BBFL (flanged box)
  • 1 x 1590Q (Done)
  • 3 x 1590XX (Done)
  • 1 x 1590D (Done)
  • 3 x 1590DD (Done)
  • 2 x 1550G (Done)
  • 1 x 1456KH3BKBK (Done)
  • 9 x 1090NS (Done)
  • 2 x Wah enclosures
  • 350 x Hammond anti-tamper screws


Analysis shows we need:

  • total of 186 total enclosures
  • 78 x 1590B
  • 44 to 49 x 1590BB (@122 or @127)
  • 29 to 31 x 1590N1 (@151 or @162)
  • 16 x Wah shells
  • 7 x 1590XX
  • 3 x 1590DD
  • 2 x 1550G
  • 1 x 1456KH3BKBK
  • 1 x 1590D
  • 1 x 1590Q


Total DIY Pedals = 371
Total Production Pedals = 115
Total Pedals = 486
Retrieved from "https://thermionic-studios.com/wiki/index.php?title=User_talk:Zander&oldid=5725"