User talk:Zander
Identifying the kind and number of enclosures we need to get for getting the pedals completed:
- Complete acquisition of kits or PCBs
- Measure and Match PCBs to enclosures
- Acquire additional necessary electronics
- Complete acquisition of enclosures
- Complete the enclosure etch patterns
- Fix patterns for name and holes
- Print and apply patterns to enclosures
- Etch enclosures then sand and clean
- Paint / Swirl enclosures for etch + swirl originality
- Sand and clean enclosures again
- Apply protective coating to enclosure
- Drill enclosures for knobs, switches, and jacks
- Put controls and jacks in enclosures and THEN solder PCBs
- Take PCBs out of enclosures for testing
- Validate build by testing
- Apply PCB anchor to enclosure and prep for final installation
- PCB back into finished enclosure for final setup
- Pedal Assembled complete - LEDs & bezels
- Complete Knobs and boxing, internal ID & serial numbers
1776 Effects
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Acquired? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|---|
Bear Hug | PCB | 1-7/8" x 1-5/16" 48 mm x 34 mm |
1590B | X | No | No | No | No | No | Compressor | X |
Britannia Original ROG version |
PCB | 3-1/8" x 2" 80 mm x 50 mm |
1590BB | X | Yes | No | No | No | No | Amp Emulator | X |
Britannia Chuck Bones version |
PCB | 3-1/8" x 2" 80 mm x 50 mm |
1590BB | X | Yes | No | No | No | No | Amp Emulator | X |
Cardinal Tremolo | PCB | 2" x 1-15/16" 51 mm x 49 mm |
1590B | X | Yes | No | No | No | No | Tremolo | X |
Multiplex Echo Machine | PCB | 3-16" x 2-7/16" 78 mm x 62 mm |
1590BB | X | Yes | No | No | No | No | Multi-Echo | X |
Multiplex Echo Machine + Mod Board |
PCB | main: 3-16" x 2-7/16" main: 78 mm x 62 mm, mod: 1-13/16" x 7/8" mod: 46 mm x 22 mm |
1590Q | X | No | No | No | No | No | Multi-Echo + Echo-selectable Warble |
X |
Multiplex Echo Machine + Mod Board + Mod Board |
PCB | main: 3-16" x 2-7/16" main: 78 mm x 62 mm, mod 1&2: 1-13/16" x 7/8" mod 1&2: 46 mm x 22 mm |
1590J | X | No | No | No | No | No | Multi-Echo + Warble on each Echo |
X |
Multiplex Jr. | PCB | 2-3/16" x 2-7/16" 55 mm x 62 mm |
1590B | X | Yes | No | No | No | No | Echo + Warble | X |
Need:
- 3 x 1590B: matched
- 3 x 1590BB: matched
- 1 x 1590Q: matched
- 1 x 1590J: matched
To do:
- 3 x 1590B: acquiring, etching, drilling, painting
- 2 x 1590BB: acquiring, etching, drilling, painting
- 1 x 1590Q: matching, acquiring, etching, drilling, painting
- 1 x 1590J: matching, acquiring, etching, drilling, painting
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Mod Board | 3 | PCB | X-X" x X-X" XX mm x XX mm |
N/A | Warble Control |
These Mod Boards provide an additional "warble" feature for other effects, but was created specifically by Josh (owner of 1776 Effects) for the Multiplex Echo Machine. From the initial description of the standalone Multiplex Echo, we got the impression that it's possible to not only warble one of the emulated tape heads in the pedal, but actually both of them. We emailed him, and Josh confirmed this to us, so we're making one echo without warble, another unit with a single warble switchable between the two echoes, and a final unit with the two echoes each getting their own warble and controls.
- SubTotal Pedals = 8
- Cumulative Total = 8
AionFX
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Acquired? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|---|
Aperture | PCB | 2-5/16" x 1-7/8" 59 mm x 47 mm |
1590N1 | X | No | No | No | No | No | Octave Fuzz | X |
Argent | PCB | 2-5/16" x 1-7/8" 59 mm x 47 mm |
1590N1 | X | Yes | No | No | No | No | Fuzz | X |
Astra | PCB | 2-5/16" x 1-7/8" 59 mm x 47 mm |
1590N1 | X | Yes | No | No | No | No | Fuzz | X |
Atom Fuzz | PCB | 2-5/16" x 1-7/8" 59 mm x 47 mm |
1590N1 | X | No | No | No | No | No | Overdrive | X |
Blueshift | PCB | 1: 2-15/16" x 2-3/16" 1: 74 mm x 55 mm 2: 3-13/16" x 2-3/16" 2: 97 mm x 55 mm |
1590N1 | X | Yes | No | No | No | No | Chorus | X |
Cascade | PCB | 2-5/16" x 2-7/16" 59 mm x 62 mm |
1590N1 | X | Yes | No | No | No | No | Distortion | X |
Chroma | PCB | 2-5/16" x 1-7/8" 59 mm x 47 mm |
1590N1 | X | Yes | No | No | No | No | Tone Control | X |
Delta | PCB | 2-5/16" x 1-7/8" 59 mm x 47 mm |
1590N1 | X | Yes | No | No | No | No | Boost | X |
DZ4 Preamp | PCB | 3-7/16" x 2-7/16" 88 mm x 62 mm |
1590BBS | X | No | No | No | No | No | Preamp | X |
Fractal | PCB | 2-5/16" x 1-7/8" 59 mm x 47 mm |
1590N1 | X | Yes | No | No | No | No | Overdrive | X |
Hypercube | PCB | 1: 2-5/16" x 2-1/2" 1: 59 mm x 63 mm 2: 2-5/16" x 1-5/8" 2: 59 mm x 41 mm |
1590N1 | X | Yes | No | No | No | No | Fuzz | X |
Gale | PCB | 2-5/16" x 1-7/8" 59 mm x 47 mm |
1590N1 | X | No | No | No | No | No | Tone Filter | X |
Isotope | PCB | 2-5/16" x 1-7/8" 59 mm x 47 mm |
1590N1 | X | Yes | No | No | No | No | Overdrive | X |
IVP Preamp | PCB | XX" x XX" XX mm x XX mm |
1590DD | X | No | No | No | No | No | Preamp | X |
L5 Preamp | PCB | XX" x XX" XX mm x XX mm |
1590XX | X | No | No | No | No | No | Preamp | X |
Meridian | PCB | 2-5/16" x 2-7/16" 59 mm x 62 mm |
1590N1 | X | Yes | No | No | No | No | Bass Comp/Enhancer | X |
Meridian | PCB | 2-5/16" x 2-7/16" 59 mm x 62 mm |
1590N1 | X | Yes | No | No | No | No | Guitar Comp/Enhancer | X |
Monolith | PCB | 2-5/16" x 2-7/16" 59 mm x 62 mm, selector: 1-1/16 x 1-1/4" selector: 27 mm x 32 mm |
1456 thing | X | No | No | No | No | No | Fuzz | X |
Obelisk | PCB | 2-5/16" x 2-7/16" 59 mm x 62 mm, selector: 1-1/16 x 1-1/4" selector: 27 mm x 32 mm |
1456 thing | X | Yes | No | No | No | No | Overdrive | X |
Quadratron | PCB | XX" x XX" XX mm x XX mm |
1590XX Other? |
X | No | No | No | No | No | Phaser | X |
Redshift | PCB | XX" x XX" XX mm x XX mm |
1590XX Other? |
X | No | No | No | No | No | Phaser | X |
Rift | PCB | 2-3/16" x 2" 55 mm x 50 mm |
1590B | X | Yes | No | No | No | No | Fuzz | X |
Spectron | PCB | main: 5-1/2" x 2-1/16" main: 139 mm x 52 mm footswitch: 2-3/16" x 15/16" footswitch: 56 mm x 24 mm selector 1: 1-1/16 x 1-1/4" selector 1: 27 mm x 32 mm selector 2: 1-1/16 x 1-1/4" selector 2: 27 mm x 32 mm |
1590XX Other? |
X | Yes | No | No | No | No | Filter | X |
TS-50 Bass Preamp | PCB | 3-7/16" x 2-7/16" 88 mm x 62 mm |
1590BBS Other? |
X | Yes | No | No | No | No | Preamp | X |
VH Drive Channel | PCB | 3-7/16" x 2-7/16" 88 mm x 62 mm |
1590BBS Other? |
X | Yes | No | No | No | No | Preamp | X |
Need:
- 7 x 1590N1: ???
- 2 x 1456FE2BKBK
To do:
- 7 x 1590N1: acquiring, etching, drilling, painting
- 2 x 1456FE2BKBK: acquiring, etching, drilling, painting
Have:
- none
- SubTotal Pedals = 25
- Cumulative Total = 33
Breakfast Audio
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Acquired? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|---|
Big Nothing Distortion | PCB | XX" x XX" XX mm x XX mm |
1590BB | X | Yes | No | No | No | No | ?? | X |
Car Crash Oscillator Synth | PCB | 3-1/4" x 2-1/4 82 mm x 57 mm |
1590BB | X | Yes | No | No | No | No | ?? | X |
Cronenberg Noise Machine | PCB | 4-1/8" x 2-1/16" 105 mm x 51 mm |
1590BB | X | Yes | No | No | No | No | ?? | X |
Salad Days Fuzz | PCB | 3" x 2-1/2" 75 mm x 65 mm |
1590BB | X | Yes | No | No | No | No | ?? | X |
Woland Expression Filter | PCB | 4-1/8" x 3-15/16" 105 mm x 94 mm |
1590XX | X | Yes | No | No | No | No | ?? | X |
Need:
- 4 x 1590BB:
- 1 x 1590XX:
To do:
- 4 x 1590BB: matching, acquiring, etching, drilling, painting
- 1 x 1590XX:
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Burger Feedback Looper | 2 | PCB | 1-1/16" x 7/8" 26 mm x 22 mm |
N/A | Loops signal back into itself |
The Burger Feedback Looper is a small PCB which is used to loop a signal and throttle it (using a potentiometer) back into itself, tweaking the ability to create more noise. This little looper PCB is obviously intended to put into an enclosure and make another control available on the pedal. We're not really clear right now where this control would be applied, but we're willing to experiment a little and see if this is a worthwhile endeavor.
- SubTotal Pedals = 5
- Cumulative Total = 38
BYOC
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
855 Drive | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Overdrive | X |
Amp Selector FX Router | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Routing | X |
Armstrong Twin | PCB | XX" x XX" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Compressor/Octave | X |
B.G. Fuzz | PCB | 2-1/8" x 2-5/16" 54 mm x 59 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Classic Compressor | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Compressor | X |
Envelope Filter Fixed Wah | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Filter | X |
Large Beaver | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | Yes | Fuzz | X |
Lazy Sprocket | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Volume Swell | X |
Leeds Fuzz | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Fuzz | X |
Parametric EQ | Kit | XX" x XX" XX mm x XX mm |
1590BB | Yes | Yes | No | Yes | No | EQ | X |
Parametric Multiband Compressor | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Compressor | X |
Phase Royal | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Phaser | X |
Soaring Skillet | PCB | 3-3/8" x 3-3/4" 87 mm x 96 mm |
1590BB2 | X | Yes | No | No | No | Phaser/Panner | X |
The Swede | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Distortion | X |
Tri Boost | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Boost | X |
Need:
- 1 x 1590B: matched
- 1 x 1590N1: matched
- 1 x 1590BB: matched
To do:
- 1 x 1590B: acquiring, etching, drilling, painting
- 11 x 1590N1 (have): etching, painting
- 1 x 1590N1: acquiring, etching, drilling, painting
- 1 x 1590BB (have): etching, painting
- 1 x 1590BB: acquiring, etching, drilling, painting
Have:
- 11 x 1590N1: matched, acquired, drilled
- 1 x 1590BB: matched, acquired, drilled
- SubTotal Pedals = 15
- Cumulative Total = 53
DeadAstronautFX
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Abductor II | PCB | 3-1/4" x 3-1/4" 83 mm x 83 mm |
1590BB | X | Yes | No | No | No | Delay | X |
Astro Flanger | PCB | 3-5/16" x 2-5/8" 84 mm x 66 mm |
1590BB | X | Yes | No | No | No | Flanger Filter | X |
AstroSim | PCB | 2-1/8" x 2-5/8" 54 mm x 67 mm |
1590N1 or 1590BB | X | Will N1 work like BB? | No | No | No | Cab Emulator | X |
AstroSim | PCB | 2-1/8" x 2-5/8" 54 mm x 67 mm |
1590N1 or 1590BB | X | Will N1 work like BB? | No | No | No | Cab Emulator | X |
Black Triangle | PCB | 2-1/16" x 2-3/16" 52 mm x 56 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Black Triangle | PCB | 2-1/16" x 2-3/16" 52 mm x 56 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Dreamtime | PCB | 3-3/16" x 3-3/16" 81 mm x 80 mm |
1590BB | X | Yes | No | No | No | Delay | X |
Easydriver | PCB | 2-1/16" x 1-7/8" 53 mm x 46 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Easydriver | PCB | 2-1/16" x 1-7/8" 53 mm x 46 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
EBE Delay | PCB | 2-1/16" x 2-9/16" 53 mm x 65 mm |
1590B | X | Yes | No | No | No | Echo | X |
Faze Filter | PCB | 3-3/16" x 2-1/16" 81 mm x 58 mm |
1590BB | X | Yes | No | No | No | Filter/Phaser | X |
Skinwalker | PCB | 3-1/4" x 1-7/8" 84 mm x 47 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
Skyscape | PCB | 3-3/16" x 2-5/8" 81 mm x 67 mm |
1590BB | X | Yes | No | No | No | Chorus | X |
Timestream | PCB | 2-1/16" x 2-11/16" 53 mm x 69 mm |
1590B | X | Yes | No | No | No | Reverb | X |
Tremshifter | PCB | 3-5/16" x 2" 84 mm x 51 mm |
1590BB | X | Yes | No | No | No | Filter/Tremolo | X |
Tremshifter | PCB | 3-5/16" x 2" 84 mm x 51 mm |
1590BB | X | Yes | No | No | No | Filter/Tremolo | X |
Need:
- 6 x 1590B matched
- 2 (or zero!) x 1590N1: ?
- 8 (or 10) x 1590BB: matched
To do:
- 6 x 1590B: acquiring, etching, drilling, painting
- 2 (or zero!) x 1590N1: matching
- 8 (or 10) x 1590BB: acquiring, etching, drilling, painting
Have:
- none
- SubTotal Pedals = 16
- Cumulative Total = 69
DeadEndFX
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Amnesia | PCB | X" x X" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Ring Mod/Tremolo/Env Filter | X |
Andamento | PCB | 3-15/16" x 3-1/8" 100 mm x 80 mm |
1590BB | X | Yes | No | No | No | Ring Mod/Tremolo/Env Filter | X |
Anubis | PCB | 3-15/16" x 2-7/8" 100 mm x 74 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
Atomic Duck | PCB | 3-7/8" x 3-1/16" 99 mm x 77 mm |
1590BB | X | Yes | No | No | No | Envelope | X |
Calypso | PCB | 2 @ 3-15/16" x 3-1/4" 2 @ 100 mm x 82 mm |
1590BBS (or 1590C) | X | Yes | No | No | No | Phaser | X |
Charonium | PCB | 3-15/16" x 3-1/8" 100 mm x 80 mm |
1590BB | X | Yes | No | No | No | Reverb | X |
Cosmo King | PCB | 2-15/16" x 5-7/8" 74 mm x 149 mm (Fits Wah) |
Wah | X | Yes | No | No | No | Wah | X |
Definite Phase | PCB | 1: 7-7/8" x 5-1/8" 1: 200 mm x 130 mm, 2: 7-7/8" x 4-1/8" 2: 200 mm x 105 mm |
1550G | X | Yes | No | No | No | Phaser | X |
DEFX Superfuzz | PCB | 3-1/4" x 2-5/16" 82 mm x 62 mm |
1590BB | X | Yes | No | No | No | Fuzz | X |
Dekadent | PCB | 3-3/16" x 4-1/8" 80 mm x 106 mm |
1590BB | X | Yes | No | No | No | Preamp / Emulator | X |
Enigma | PCB | 1: 6-1/4" x 3-3/4" 1: 160 mm x 95 mm, 2: 3-13/16" x 7/8" 2: 96 mm x 24 mm |
1590DD | X | Yes | No | No | No | Flanger | X |
Flange-a-Rama | PCB | 1: 5-1/8" x 2-1/8", 1: 130 mm x 55 mm 2: 5-1/8" x 3-3/16", 2: 130 mm x 80 mm |
1590XX | X | Yes | No | No | No | Flanger | X |
Freq Tweq v.2 | PCB | 1: X-x/x" X-x/x", 1: XX mm x XX mm |
1590J | X | Yes | No | No | No | Parametric EQ | X |
Fubble Wubble | PCB | 2-15/16" x 4-1/2" 74 mm x 115 mm (Fits Wah) |
Wah | X | Yes | No | No | No | Fuzz Wah | X |
Glenn | PCB | 2" x 2-3/8" 50 mm x 60 mm |
1590B | X | Yes | No | No | No | Boost | X |
Hooke | PCB | 1: 6-5/16" x 1-3/16" 1: 160 mm x 30 mm, 2: 3-15/16" x 1-3/16" 2: 100 mm x 30 mm |
1590D | X | Yes | No | No | No | Reverb | X |
Inchindown Redux | PCB | 1: X-x/x" X-x/x", 1: XXX mm x XX mm |
1590J | X | Yes | No | No | No | Echo | X |
Lola Phase | PCB | 2 @ X" x X" 2 @ XX mm x XX mm |
1550G | X | Yes | No | No | No | Phaser | X |
Ludwig II | PCB | 1: 6-1/4" x 3-1/8", 1: 160 mm x 80 mm 2: 6-1/4" x 3" 2: 160 mm x 76 mm |
1590D + Wah | X | Yes | No | No | No | Synther | X |
Moonstone (Deluxe) | PCB | 4" x 3" 100 mm x 78 mm |
1590BB | X | Yes | No | No | No | Octave Fuzz | X |
Mr. Multi | PCB | 2-7/8" x 3-15/16" 74 mm x 100 mm (Fits Wah) |
Wah | X | Yes | No | No | No | Wah | X |
Neofuzz V | PCB | 3-1/8" x 3-7/8" 80 mm x 99 mm |
1590BB | X | Yes | No | No | No | Fuzz | X |
Oiolossë | PCB | 4" x 2-1/4" 102 mm x 56 mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Origami | PCB | 1: X-x/x" X-x/x", 1: XXX mm x XX mm |
1590BB2 (or 1590BBS) | X | Yes | No | No | No | Fuzz | X |
Pink's Clipper | PCB | X" x X" XX mm x XX mm |
1590B | X | Yes | No | No | No | Overdrive | X |
PLLone | PCB | 7-7/8" x 4-3/4" 200 mm x 120 mm |
1550G | X | Yes | No | No | No | Multiplier | X |
Pompei | PCB | 1: 9-7/8" x 5-7/8", 1: 250 mm x 150 mm 2: 9-7/8" x 5-7/8" 2: 250 mm x 150 mm 3, diode1: 3-3/16" x 2-1/16" 3, diode1: 80 mm x 67 mm, 4, diode2: 3-3/16" x 2-1/16" 4, diode2: 80 mm x 67 mm, 5, Wah: 2-15/16" x 3-15/16" 5, Wah: 74 mm x 100 mm (Fits Wah) |
1456KH3BKBK + Wah + Wah |
X | Yes | No | No | No | Synth | X |
Reflektor | PCB | 1: X-x/x" X-x/x", 1: XXX mm x XX mm |
1590D | X | Yes | No | No | No | Tube Overdrive | X |
Shillelagh | PCB | X-x/x" X-x/x", XX mm x XX mm |
1590BB | X | Yes | No | No | No | Fuzz | X |
Spectrum | PCB | 4" x 3-1/8" 100 mm x 80 mm |
1590BB | X | Yes | No | No | No | Filter | X |
Stretta | PCB | 1: X-x/x" X-x/x", 1: XXX mm x XX mm |
1590N1 | X | Yes | No | No | No | Compressor | X |
String Ringer | PCB | 1: 6-1/4" x 3-3/4" 1: 160 mm x 95 mm, 2: 1-7/8" x 1-1/8" 2: 46 mm x 28 mm |
1590DD | X | Yes | No | No | No | Ring Mod | X |
String Ringer | PCB | 1: 6-1/4" x 3-3/4" 1: 160 mm x 95 mm, 2: 1-7/8" x 1-1/8" 2: 46 mm x 28 mm |
1590DD | X | Yes | No | No | No | Ring Mod | X |
Talkalizer | PCB | 2-15/16" x 3-15/16" 74 mm x 100 mm (Fits in Wah) |
Wah | X | Yes | No | No | No | Wah/Formant | X |
Tatiana | PCB | 4-1/4" x 3-1/4" 108 mm x 83 mm |
1590BB | X | Yes | No | No | No | Feedback Looper | X |
Terrahawk | PCB | 3-3/16" x 3-15/16" 80 mm x 100 mm |
1590BB | X | Yes | No | No | No | Boost | X |
Tresonator | PCB | 2-15/16" x 5-7/8" 74 mm x 149 mm (Fits Wah) |
Wah | X | Yes | No | No | No | Filter | X |
Trible | PCB | 3-15/16" x 2-3/8" 100 mm x 60 mm |
1550M | X | Yes | No | No | No | Fuzz | X |
Turbotrem | PCB | X" x X" XX mm x XX mm |
1590D | X | Yes | No | No | No | Tremolo | X |
Zuul | PCB | 1: X-x/x" X-x/x", 1: XXX mm x XX mm |
1590BB2 (or 1590BBS) | X | Yes | No | No | No | Loop Gate | X |
Superfuzz: https://www.youtube.com/watch?v=SqsNQ7PzrcQ
Need:
- 15 x 1590BB
- 8 x Wah
- 2 x 1590N1
- 3 x 1590DD
- 4 x 1590D
- 1 x 1550M
- 3 x 1550G
- 1 x 1590BBS
- 1 x 1590XX
- 1 x 1456KH3BKBK (Digikey)
- The Pompei needs two (2) Wah enclosures repurposed into expression pedals
- The Ludwig needs one (1) Wah enclosure repurposed into an expression pedal
To do:
- 15 x 1590BB: acquiring, etching, drilling, painting
- 8 x Wah: acquiring, etching, drilling, painting
- 2 x 1590N1: acquiring, etching, drilling, painting
- 3 x 1590DD: acquiring, etching, drilling, painting
- 4 x 1590D: acquiring, etching, drilling, painting
- 1 x 1550M: acquiring, etching, drilling, painting
- 3 x 1550G: acquiring, etching, drilling, painting
- 1 x 1590BBS: acquiring, etching, drilling, painting
- 1 x 1590XX: acquiring, etching, drilling, painting
- 1 x 1456KH3BKBK (Digikey): acquiring, etching, drilling, painting
Have:
- none
Ordered:
- pending
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Loop-D-Loop | 2 | PCB | 3-15/16" x 3-1/16" 100 mm x 78 mm |
1590BB / 1590BB2 | Effects Loop Line Level Adjuster |
The Loop-D-Loop isn't so much a pedal as it is more of a useful tool to enable the use of instrument-level (-10 dB) pedals in an unbuffered or line-level effects loop in an amp (+4 dB). They have to be built in a manner that's just the same as a pedal in terms of parts and assembly, and despite the fact that they won't function as sound effect, they will be operated as pedals and so we'll count them as such.
- SubTotal Pedals = 40
- Cumulative Total = 109
Delptronics
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Thunderclap | Kit | XX" x XX" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | HandClap | X |
Need:
- 1 x 1590N1
To do:
- 1 x 1590N1: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 1
- Cumulative Total = 110
Effects Layouts
PCBs for pedals measured - need to finish widgets
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Acquired? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|---|
Cloak & Dagger | PCB | 1-7/8" x 1-7/16" 48 mm x 36 mm |
1590B | X | Yes | No | No | No | No | Preamp / Tone Filter | X |
Cranky Speaker* | PCB | 1-1/16" x 7/8" 26 mm x 24 mm |
NA | No | No | No | No | No | No | Boost | X |
EF120 Overdrive | PCB | 3-1/4" x 2-3/8" 83 mm x 60 mm |
1590BB | X | No | No | No | No | No | Amp Emulator | X |
Highflier | PCB | 1-15/16" x 1-3/4" 49 mm x 44 mm |
1590B | X | Yes | No | No | No | No | Amp Emulator | X |
Nezumi Drive | PCB | 2-1/16" x 1-7/16" 52 mm x 40 mm |
1590B | X | Yes | No | No | No | No | Distortion | X |
Odd One Out | PCB | 2" x 1-1/2" 51 mm x 38 mmm |
1590B | X | Yes | No | No | No | No | Overdrive | X |
RNGD | PCB | 2-1/16" x 2-1/4" 52 mm x 64 mm |
1590B | X | Yes | No | No | No | No | Glitch-Delay | X |
Soleo | PCB | 2-1/4" x 2-7/16" 56 mm x 61 mm |
1590N1 | X | Yes | No | No | No | No | Boost / Fuzz | X |
Strider* | PCB | 1-13/16" x 3/4" 46 mm x 19 mm |
NA | No | Yes | No | No | No | No | Boost | X |
Strider | PCB | 1-13/16" x 3/4" 46 mm x 19 mm |
1590B | X | Yes | No | No | No | No | Boost | X |
Sunnbeam | PCB | 3-5/16" x 2-5/8" 85 mm x 67 mm |
1590BB | X | Yes | No | No | No | No | Amp Emulator | X |
Super Trouper | PCB | 3-5/16" x 1-1/2" 84 mm x 38 mm |
1590BB | X | Yes | No | No | No | No | Amp Emulator | X |
Suprolo | PCB | 3-1/4" x 2-1/16" 82 mm x 52 mm |
1590BB | X | Yes | No | No | No | No | Amp Emulator | X |
Undercut | PCB | 1-15/16" x 1-3/4" 49 mm x 44 mm |
1590B | X | Yes | No | No | No | No | Tone Control | X |
Virtuoso Fuzz | PCB | 2-1/16" x 1-3/4" 52 mm x 44 mm |
1590B | X | Yes | No | No | No | No | Fuzz | X |
(*) = Not a pedal. Could be for making a builder/tester tool, or be serving as a constituent part to a pedal.
Notes:
- One (1) Strider to be used with PCB Mania Samurai Boost to make Time Machine Boost pedal.
- Cranky Speaker will likely be combined with PCB Mania Amazing Boost to make "Harmonic Boost" pedal.
Need:
- 8 x 1590B
- 1 x 1590N1
- 3 x 1590BB
To do:
- 8 x 1590B: acquiring, drilling, painting
- 1 x 1590N1: acquiring, drilling, painting
- 3 x 1590BB: acquiring, drilling, painting
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Incandenza | 40 | PCB | 1-5/8" x 1-3/8" 40 mm x 31 mm |
N/A | True Bypass Soft Switch |
Latching Incandenza | 5 | PCB | X" x X" X mm x X mm |
N/A | Low-Power True Bypass Soft Switch |
If these relayed switches are cool enough, like the Fuzzdog HumStop, these could be put into many pedals. Uses 100,000-cycle Momentary Switch for True Bypass instead of conventional 3PDT which is only rated for 25,000 cycles. The internal electronic relay can go 200,000 to 500,000 cycles before needing replacement. This could make pedal switch maintenance much better and pedal switching much more pleasant. The pure relay takes about 50 millivolts, the latching relay uses almost zero. The latching relays will be used on those pedals that already have high power demands.
- SubTotal Pedals = 13
- Cumulative Total = 123
Electric Druid
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Acquired? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|---|
DigiDelay | PCB | 4-5/16" x 2-3/4" 109 mm x 70 mm |
1590BB | X | Yes | No | No | No | No | Delay | X |
FilterFX | PCB | 4-3/8" x 2-3/4" 112 mm x 70 mm |
1590BB | X | Yes | No | No | No | No | Filter | X |
Flangilicious | PCB | 4-3/16" x 1-7/8" 107 mm x 48 mm |
1590BB | X | Yes | No | No | No | No | Flanger | X |
Hard Bargain | PCB | 3-7/8" x 1-11/16" 99 mm x 42 mm |
1590BB | X | Yes | No | No | No | No | Distortion | X |
Need:
- 4 x 1590BB
To do:
- 4 x 1590BB: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 4
- Cumulative Total = 127
Electric Roots
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Birmingham Preamp | PCB | 2-5/16" x 1-3/4" 59 mm x 44 mm |
XX | 1590N1 | Yes | No | No | No | Distortion | X |
Car Crash | PCB | XX" x XX" XX mm x XX mm |
XX | X | Yes | No | No | No | Filter | X |
Complex Preamp | PCB | XX" x XX" 34 mm x 26 mm |
XX | X | Yes | No | No | No | Tone Filter | X |
Double Don't Do Crack | PCB | 1. XX" x XX" 1. 30 mm x 26 mm 2. XX" x XX" 2. 30 mm x 26 mm |
XX | X | Yes | No | No | No | Double Boost | X |
Joystick | PCB | XX" x XX" XX mm x XX mm |
XX | X | Yes | No | No | No | Synth | X |
Synth Filter | PCB | XX" x XX" 55 mm x 47 mm |
XX | X | Yes | No | No | No | Synth | X |
Thermionic Banshee* | PCB | XX" x XX" 50 mm x 46 mm |
Wah | X | Yes | No | No | No | Sound Generator | X |
Ventilator | PCB | XX" x XX" 48 mm x 33 mm |
Wah | X | Yes | No | No | No | Sound Generator | X |
(*) = Not a pedal. Will be serving as a constituent part to a pedal.
Need:
- 5 x 1590B
- 1 x 1590BB
- 2 x Wah
To do:
- 5 x 1590B: acquiring, drilling, painting
- 1 x 1590BB: acquiring, drilling, painting
- 2 x Wah: acquiring, drilling, painting
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Blender | 3 | PCB | X-X/X" x X-X/x" XX mm x XX mm |
1590?? | Blend 2 Signals |
Impedance Adjuster | 2 | PCB | X-X/X" x X-X/x" 25 mm x 21 mm |
1590?? | Fixes Pickups and Fuzz |
Signal Splitter | 2 | PCB | X-X/X" x X-X/x" 30 mm x 23 mm |
1590?? | Split Channels |
Theremin | 1 | PCB | XX" x XX" 50 mm x 46 mm |
1590?? | Sound Generator |
- SubTotal Pedals = 8
- Cumulative Total = 135
Fuzzdog Pedals
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
1978 IC Big Fluff Pie | PCB | X" x X" 50 mm x 40 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Alluring Echo | PCB | 2" x 2-5/16" 50 mm x 57 mm |
1590B | X | Yes | No | No | No | Echo | X |
Big Fluffy Pie (Bass Blender) | PCB | XX" x XX" 50 mm x 50 mm |
1590B | X | Yes | No | No | No | Bass Fuzz | X |
Black Ash Fuzz | PCB | XX" x XX" 50 mm x 30 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Cab Sim ROG Condor | PCB | 2" x 1-9/16 50 mm x 46 mm |
1590B | X | Yes | No | No | No | CabSim | X |
Cream Fluff Fuzz | PCB | 2" x 1-5/16" 50 mm x 33 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Dirt Dessert | PCB | 2" x 1/-13/16" 50 mm x 46 mm |
1590B | X | Yes | No | No | No | OD + Overtones | X |
Droid Fuzz Arpeggiator | PCB | main: 2-1/8" x 2" main: 50 mm x 54 mm, rotary pcb: 1-1/16" x 1-1/4" rotary pcb: 32 mm x 27 mm |
1590B | X | Yes | No | No | No | Fuzz/Arpeggiator | X |
Eight Two Zero Drive | PCB | XX" x XX" 50 mm x 50 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Engineer's Thumb | PCB | 2" x 1-13/16" 50 mm x 47 mm |
1590B | X | Yes | No | No | No | Compressor | X |
Exploder Fuzz | PCB | XX" x XX" 50 mm x 34 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Fat-Ass Blooper | PCB | XX" x XX" 50 mm x 50 mm |
1590N1 (if works) | X | Yes | No | No | No | Mixer | X |
Fuzz Raw V1 | PCB | XX" x XX" 50 mm x 50 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
GimpFX Ultr-Fk | PCB | 80 mm x 40 mm 80 x 20 mm |
1590BB | X | Yes | No | No | No | Bass Dist | X |
Graphic Fuzz | PCB | 2" x 3/4" 50 mm x 20 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Green Citrus | Kit | XX" x XX" 50 mm x 46 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Harmonic Percolator | PCB | 2" x 7/8" 50 mm x 22 mm |
1590B | X | Yes | No | No | No | Fuzz+Filter | X |
HF Modulator | PCB | 2" x 1-7/8" 50 mm x 29 mm |
1590B | X | Yes | No | No | No | Bitcrusher | X |
Just the Meat | PCB | XX" x XX" 25 mm x 22 mm |
1590B | X | Yes | No | No | No | Boost | X |
Liquified Feline | PCB | XX" x XX" 50 mm x 46 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Manky Fruit Fuzz | PCB | X" x X" 50 mm x 48 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
No-Tube Driver | PCB | 2" x 1-5/8" 50 mm x 40 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Nuclear Fuzz | PCB | 2" x 2" 50 mm x 50 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Orange King | PCB | 2" x 1-7/16" 50 mm x 35 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Reasonably Good Mangler | PCB | XX" x XX" 50 mm x 40 mm |
1590BB | X | Yes | No | No | No | Fuzz | X |
Recurring Nightmare | Kit | 3-3/16" x 2" 80 mm x 50 mm |
1590BB | X | Yes | No | No | No | Echo | X |
Repeater | PCB | 2" x 7/8" 50 mm x 22 mm |
1590B | X | Yes | No | No | No | Tremolo | X |
Sonic Tight'un | PCB | 2" x 15/16" 50 mm x 22 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Spooky Mids | PCB | 2" x 1-3/8" 50 mm x 34 mm |
1590B | X | Yes | No | No | No | EQ | X |
Sunny-T Extreme | PCB | 2" x 1-5/16" 50 mm x 33 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Sunny-T Extreme (+GPCB Sunn-T) | PCB | 2" x 1-5/16" 50 mm x 33 mm |
1590XX/J(?) | X | Yes | No | No | No | Distortion | X |
Tight White Drive | PCB | XX" x XX" 50 mm x 40 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Two Dozen Silvertones | PCB | XX" x XX" 50 mm x 46 mm |
1590B | X | Yes | No | No | No | Amp Emulator | X |
Verb Engine | PCB | XX" x XX" 80 mm x 33 mm |
1590BB | X | Yes | No | No | No | Reverb | X |
War Pig | PCB | 2" x 1-3/4" 50 mm x 44 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Warp Sound | PCB | 2" x 1-3/16" 50 mm x 30 mm |
1590B | X | Yes | No | No | No | Distortion + Envelope | X |
Wolf Computer | PCB | XX" x XX" 50 mm x 34 mm |
1590BB | X | Yes | No | No | No | Fuzz | X |
Need:
- 28 x 1590B
- 1 x 1590N1
- 5 x 1590BB
- 1 x 1590XX (maybe a 1590J?)
To do:
- 28 x 1590B: acquiring, drilling, painting
- 1 x 1590BB: acquiring, drilling, painting
- 5 x 1590BB: acquiring, drilling, painting
- 1 x 1590XX (maybe a 1590J?): acquiring, drilling, painting
Have:
- Nothing
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Big Muff Tonestack Mini | 2 | Tone Control | X" x X" XX mm x XX mm |
1090NS | Zero-gain Big Muff Tone Control |
Blender II | 2 | Mixer | X" x X" XX mm x XX mm |
N/A | Mixes 1 Signal (Effect) into another |
Buffered Pickup Sim | 2 | Line-Loader | 1" x 1" 25 mm x 25 mm |
1090B | Pickup Impedance Emulator |
Clipper | 2 | Diode Selector | X" x X" XX mm x XX mm |
N/A | 6-way "diode" Selector. |
Cream Buffer | 6 | Buffer | 1" x 1" 25 mm x 25 mm |
1090NS | Pete Cornish Transistor Buffer |
Dude Boost | 3 | Boost | X" x X" XX mm x XX mm |
N/A | Small footprint FET boost / Possible Buffer |
Electrica+ | 3 | Boost | X" x X" 25 mm x 22 mm |
N/A | Multi-circuit Distortion / Possible Buffer |
Hum Stop | 150 | Power Filter | X" x X" XX mm x XX mm |
N/A | In-pedal Power Hum Filter |
Inverting Buffer | 7 | Buffer | 1-1/8" x 1" 28 mm x 25 mm |
1090NS | Buffer w/ Phase Inversion |
Just the Meat | 3 | Boost | X" x X" 25 mm x 22 mm |
N/A | (Exact same board as Electrica+) |
Klon Buffer | 8 | Buffer | 1" x 7/8" 25 mm x 22 mm |
1090NS | IC buffer from Klon pedal |
Muff Tone | 4 | Tone Control | X" x X" XX mm x XX mm |
1090NS | Gain-available Big Muff Tone Control |
Pot Swap | 2 | Switch | X" x X" XX mm x XX mm |
1090NS | Switches Between Two Pots |
Switcheroo | 4 | Switch | X" x X" XX mm x XX mm |
1090NS | 3-Line Signal Switcher (Effect Order) |
Tigger Boost | 2 | Boost | X" x X" XX mm x XX mm |
N/A | Garcia "Tiger Guitar" Boost |
Need:
- 8 x 1090NS
To do:
- 8 x 1090NS: drilling, painting
Have:
- 8 x 1090NS
- SubTotal Buffers = 21(?)
- SubTotal Pedals = 37
- Cumulative Total = 172
General Guitar Gadgets
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
BMP Civil War | Kit | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Fuzz | X |
BMP GGG Tuned | Kit | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Fuzz | X |
BMP Green Russian | Kit | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Fuzz | X |
BMP OpAmp | Kit | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Fuzz | X |
BMP Rams Head | PCB | 2-3/16" x 1-1/2" 55 mm x 38 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
BMP Triangle | Kit | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Fuzz | X |
BrassMaster | Kit | XX" x XX" XX mm x XX mm |
1590BB | Yes | Yes | No | Yes | No | Bass Fuzz | X |
Bronx Cheer | PCB | 1-5/8 x 1-3/16" 42 mm x 31 mm |
1590B | X | Yes | No | No | No | Fuzz+Filter | X |
BSIAB2 | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | Yes | Distortion | X |
BSIAB2 | Kit | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Distortion | X |
BSIAB2 | Kit | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Distortion | X |
CB1 | Kit | XX" x XX" XX mm x XX mm |
1590B | Yes | Yes | No | Yes | No | Boost | X |
ITS8 | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | Yes | Overdrive | X |
Klon Centaur | Kit | XX" x XX" XX mm x XX mm |
Gorva 1590BB | X | Yes | No | No | Yes | Overdrive | X |
MBB | Kit | XX" x XX" XX mm x XX mm |
1590N1 | X | No | No | No | No | Overdrive | X |
Mini Mixer | Kit | XX" x XX" XX mm x XX mm |
1590N1 | Yes | Yes | No | Yes | No | Mixer | X |
Orange Squeezer | Kit | XX" x XX" XX mm x XX mm |
1590B | Yes | Yes | No | Yes | Yes | Compressor | X |
Rodent | PCB | 2-1/8" x 1-7/16" 55 mm x 46 mm |
Custom | X | Yes | No | Yes | Yes | Distortion | X |
Scrabbler | Kit | XX" x XX" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Oct/Fuzz | X |
Scrabbler | Kit | XX" x XX" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Oct/Fuzz | X |
TOCT | Kit | XX" x XX" XX mm x XX mm |
Wahwah | X | Yes | No | No | No | Oct/Fuzz | X |
GGG Custom Wah | PCB | 2-1/8 x 1-3/4" 55 mm x 44 mm |
Wahwah | X | Yes | No | No | No | Wah | X |
GGG Custom Wah | PCB | 2-1/8 x 1-3/4" 55 mm x 44 mm |
Wahwah | X | Yes | No | No | No | Wah | X |
Need:
- 1 x 1090NS matched (headphone amp)
- 8 x 1590B
- 5 x 1590N1
- 2 x 1590BB
- 3 x Wahwah
- 1 x eBay Custom cheese wedge: acquiring, drilling, painting. TBD if not incl. TOCT on wah.
To do:
- 1 x 1090NS: acquiring, drilling, painting
- 8 x 1590B: acquiring, drilling, painting
- 1 x 1590N1: painting
- 2 x 1590N1: acquiring, drilling, painting
- 1 x 1590BB: painting
- 1 x Gorva 1590BB: drilling
- 2 x Wah encl.: determine existing enclosure use vs all pedal PCBs
Have:
- 1 x 1590B, drilled, painted (Orange Squeezer)
- 1 x 1590N1: drilled, painted (BSIAB2)
- 1 x 1590N1: drilled, (Mini Mixer)
- 1 x 1590BB: drilled, (Brassmaster)
- 1 x Gorva 1590BB: powder coated (Klon)
- 1 x Rat pedal enclosure
NOTE: Rodent and TOCT were originally for rehousing in original enclosures. This may not work for TOCT since the Octavio is discontinued and therefore "cooler" now. TOCT should maybe go into a wah?
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Headphone Amp | 1 | PCB | 2" x 1-3/16" 50 mm x 30 mm |
1090NS | Headphone Mini-Amp |
- SubTotal Pedals = 23
- Cumulative Total = 195
God City Instruments
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
6 Knob Compressor | PCB | 2-5/16" x 1-7/8" 58 mm x 35 mm |
1590N1 | X | Yes | No | No | No | Compressor | X |
Apostle | PCB | 3-1/16" x 2-9/16" 79 mm x 66 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
Bass Brutalist | PCB | 2-5/16" x 1-7/8" 59 mm x 48 mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Bass Overdrive | PCB | 3-1/4" x 2-1/8" 82 mm x 55 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
CTG | PCB | 3" x 2-3/8" 76 mm x 60 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
HM2_v.NW | PCB | 3-1/4" x 2-3/16" 82 mm x 55 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
MT2_v.NW | PCB | 3-1/4" x 2-3/16" 83 mm x 55 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
Socialist Jr. | PCB | 3-3/8" x 1-7/8" 86 mm x 46 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
Need:
- 2 x 1590N1
- 6 x 1590BB
To do:
- 2 x 1590N1: acquiring, drilling, painting
- 6 x 1590BB: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 8
- Cumulative Total = 203
GrindCustoms FX
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Fluffgirl | PCB | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Envelope Filter | X |
Fluffgirl | PCB | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Envelope Filter | X |
Goat v3 | PCB | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Machette | PCB | XX" x XX" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Filter | X |
Ultrastoner | PCB | XX" x XX" XX mm x XX mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Need:
- 4 x 1590B: matched
- 1 x 1590N1: matched
To do:
- 4 x 1590B: acquiring, drilling, painting
- 1 x 1590N1: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 5
- Cumulative Total = 205
GuitarPCB
PCBs measured - except for kit build
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
4-Track Fuzz | PCB | 1-15/16" x 1-1/2" 50 mm x 38 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
American Fuzz v3 | PCB | 1-7/8" x 1-1/2" 46 mm x 37 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Apollo Tremolo | PCB | 1-15/16" x 1-3/4" 49 mm x 45 mm |
Wahwah | X | Yes | No | No | No | Tremolo | X |
Dr. Rock v2 | PCB | 1-3/4" x 1-9/16" 44 mm x 39 mm |
1590B | X | Yes | No | No | No | Distortion | X |
G-02 Animal v1 | PCB | 2-3/16" x 2-5/16" 56 mm x 59 mm |
1590N1 | Yes | Yes | No | Yes | Yes | Fuzz | X |
G-02 Animal v1 | PCB | 2-3/16" x 2-5/16" 56 mm x 59 mm |
1590N1 | Yes | Yes | No | Yes | Re-do | Fuzz | X |
Mastodon Fuzz v2a | PCB | 1-7/16" x 1-3/8" 36 mm x 35 mm |
1590B | X | Yes | No | No | No | Fuzz | x |
MoWah v3 | PCB | 2-1/16" x 2" 53 mm x 50 mm |
Wahwah | X | Yes | No | No | No | Wahwah | X |
OMG Mongoose Fuzz v3 | PCB | 1-5/8" x 1-3/8" 42 mm x 35 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Sriracha Fuzz | Kit | XX" x XX" XX mm x XX mm |
1590B(?) | X | Yes | No | No | No | Fuzz | X |
Sunn-T Preamp | PCB | 1-15/16" x 1-11/16" 49 mm x 43 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
Sunn-T Preamp* (+Fuzzdog Sunny-T) |
PCB | 1-15/16" x 1-11/16" 49 mm x 43 mm |
1590XX (already counted) | Yes | Yes | No | No | No | Amp Emulator | X |
Tone Tweq | PCB | 2" x 1-1/4" 50 mm x 32 mm |
1590B | X | Yes | No | No | No | Tone Control | X |
(*) = Not a pedal. Could be for making a builder/tester tool, or be serving as a constituent part to a pedal.
Need:
- 7 x 1590B: matched
- 3 x 1590N1: matched
- 1 x 1590BB: matched
- 2 x Wahwah: matched
To do:
- 7 x 1590B: acquiring, drilling, painting
- 1 x 1590N1: painting
- 1 x 1590N1: acquiring, drilling, painting
- 1 x 1590BB: acquiring, drilling, painting
- 2 x Wahwah: acquiring, drilling, painting
Have:
- 2 x 1590N1: ready
Cool Widgets
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Paramix v4* | PCB | 2-1/8" x 1-3/4" 53 mm x 44 mm |
1590N1 | X | Yes | No | No | No | 2-Loop Mixer | X |
- SubTotal Pedals = 12 (+Sunn-T will be combined w/ Fuzzdog Total Sonic Distortion so not counted)
- Cumulative Total = 220
Jed's Peds
PCBs for pedals measured - need to finish widgets
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Double SHO Crackle Boost | PCB | 1: 1" x 13/16" 1: 25 mm x 21 mm 2: 1" x 13/16" 2: 25 mm x 21 mm |
1590B | X | Yes | No | No | No | Boost | X |
Double SHO Crackle Boost | PCB | 1: 1" x 13/16" 1: 25 mm x 21 mm 2: 1" x 13/16" 2: 25 mm x 21 mm |
1590B | X | Yes | No | No | No | Boost | X |
Hot Harmonics | PCB | 1-13/16" x 1-7/16" 46 mm x 35 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Mysheen | PCB | 1-15/16" x 1-7/16" 49 mm x 37 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Supreaux Deux | PCB | 2" x 1-1/8" 50 mm x 29 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Need:
- 5 x 1590B
To do:
- 5 x 1590B: acquiring, drilling, painting
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
The Test Bed | 1 | PCB | X-X/X" x X-X/x" XX mm x XX mm |
1590?? | Circuit Hookup w/ Circuit-In Tone |
Maybe Baby! | 1 | PCB | X-X/X" x X-X/x" XX mm x XX mm |
1590?? | Powered ABY Switch |
Need:
- 2 x 1590??
To do:
- 2 x 1590??: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 5
- Cumulative Total = 225
JMK PCBs
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Blue Warbler 2 | PCB | 1-15/16" x 1-9/16" 49 mm x 39 mm |
1590B | X | Yes | No | No | No | Tremolo | X |
Expandora | PCB | 2-1/4" x 1-9/16" 57 mm x 40 mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Hoodoo Drive | PCB | 1-15/16" x 1" 50 mm x 25 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Level Up | PCB | 2-3/16" x 1-3/16" 56 mm x 31 mm |
1590N1 | X | No | No | No | No | Octave Fuzz | X |
Modulay | PCB | 1-15/16" x 1-15/16" 50 mm x 50 mm |
WahWah | X | No | No | No | No | Delay/Echo | X |
Need:
- 2 x 1590B
- 2 x 1590N1
- 1 x WahWah
To do:
- 2 x 1590B: acquiring, drilling, painting
- 2 x 1590N1: acquiring, drilling, painting
- 1 x WahWah: acquiring, drilling, painting
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Testing Rig | 1 | PCB | 3-1/16" x 1-7/8" 77 mm x 47 mm |
1590BBFL | Circuit Tester w/ Listen Probe |
Tiny Tester | 2 | PCB | 15/16" x 1-1/16" 20 mm x 23 mm |
1590GFL | Test Tone Oscillator |
Need:
- 1 x 1590BBFL
- 1 X 1590BFL / 1590GFL
To do:
- 1 x 1590BBFL: acquiring, drilling, painting
- 1 x (1590BFL / 1590GFL? for Tiny Tester and Madbean Road Rage?)
Have:
- 1 x 1590BBFL
- 1 x 1590GFL - Need to see if Tiny Tester / Road Rage combo will fit?
NOTE: "Ultra Tester" / Oscillator projects are to assist in building other pedals: Combination of JMKPCBs Testing Rig / Tiny Testers and Madbean Road Rages
- SubTotal Pedals = 5
- Cumulative Total = 230
Korg
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Nu:Tekt Harmonic Distortion | PCB | XX" x XX" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Distortion | X |
Nu:Tekt OD-S | PCB | XX" x XX" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Overdrive | X |
Nu:Tekt Power Tube Reactor | PCB | XX" x XX" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Tone Filter | X |
Need:
- 3 x 1590BB
To do:
- 3 x 1590BB: painting
Have:
- 3 x 1590BB: acquired, drilled
- SubTotal Pedals = 3
- Cumulative Total = 233
Lectric-FX
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Altered State | PCB | 4" x 2-7/16" 100 mm x 62 mm |
1590BB | X | No | No | No | No | Phaser | X |
Bloodstone | PCB | 3-1/4" x 2-3/4" 83 mm x 70 mm |
1590BB | X | No | No | No | No | Phaser | X |
Celeste Chorus | PCB | 3-3/16" x 2-3/8" 81 mm x 60 mm |
1590BB | X | No | No | No | No | Chorus | X |
Countdown | PCB | 5-3/8" x 4-3/8" 136 mm x 111 mm |
1590XX | X | No | No | No | No | Phaser | X |
Dandy Horse | PCB | 5-1/4" x 3-15/16" 133 mm x 100 mm |
1590XX | X | No | No | No | No | Flanger | X |
DC-Echo | PCB | 5-3/8" x 3-1/2" 136 mm x 88 mm |
1590XX | X | No | No | No | No | Delay | X |
Downtown | PCB | 5-1/4" x 3-13/16" 133 mm x 97 mm |
1590XX | X | No | No | No | No | Fuzz/Octaver | X |
Flintlock | PCB | 4-1/4" x 2-5/8" 109 mm x 66 mm |
1590BB | X | No | No | No | No | Flanger | X |
Flyleaf | PCB | 3-1/4" x 2-3/4" XX mm x 70 mm |
1590BB | X | No | No | No | No | Envelope Follower | X |
Mongrel OD | PCB | 2" x 2" 50 mm x 50 mm |
1590B | X | No | No | No | No | Fuzz Overdrive | X |
Old Chap | PCB | 3-7/8" x 3-3/8" 98 mm x 84 mm |
1590BB | X | No | No | No | No | Flanger | X |
Pork Rind | PCB | 2" x 2" 50 mm x 50 mm |
1590B | X | No | No | No | No | Octave Fuzz (Superfuzz) | X |
Soy Sauce | PCB | 2-5/16" x 2-7/8" 59 mm x 73 mm |
1590N1 | X | No | No | No | No | Subharmonizer | X |
Zirconia | PCB | 2-5/16" x 3-1/4" 59 mm x 83 mm |
1590N1 | X | No | No | No | No | Delay | X |
Need:
- 2 x 1590B
- 2 x 1590N1
- 6 x 1590BB
- 4 x 1590XX
To do:
- 2 x 1590B: acquiring, drilling, painting
- 2 x 1590N1: acquiring, drilling, painting
- 6 x 1590BB: acquiring, drilling, painting
- 4 x 1590XX: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 14
- Cumulative Total = 247
Madbean Pedals
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Archibald | PCB | main: 3-5/16" x 4" main: 86 mm x 102 mm, tube pcb: 15/16" tube pcb: 22 mm x 31 mm |
125BB / 1590BB2 | X | Yes | No | No | No | Tube Overdrive | X |
Bloviator | PCB | 1-7/8" x 1-5/16" 48 mm x 34 mm |
1590B | X | Yes | No | No | No | Tone Control | X |
Blue Steel | PCB | 2-5/16" x 2-7/8" 59 mm x 78 mm |
1590N1 | X | Yes | No | No | No | Overdrive | X |
Bumblebee | PCB | 1-15/16" x 1-15/16" 50 mm x 50 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Burly Bear | PCB | 3-3/8" x 2-1/2" 86 mm x 64 mm |
1590BB | X | Yes | No | No | No | Fuzz | X |
Charlatan | PCB | X" x X" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Multi-Modulator | X |
Current Lover | PCB | 3-5/16" x 2-13/16" 85 mm x 71 mm |
1590BB | X | Yes | No | No | No | Flanger | X |
Dragonbeard | PCB | 3-5/16" x 2-1/2" 85 mm x 67 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
Dragon Hound | PCB | 1: 2-3/16" x 2" 1: 55 mm x 57 mm 2: 2-1/8" x 1-3/16" 2: 54 mm x 36 mm |
1590B | X | Yes | No | No | No | Overdrive/Distortion | X |
Edgelord | PCB | main: 3-3/8" x 3-3/8" main: 87 mm x 87 mm, rotary pcb: 1-1/8" x 1-3/8" rotary pcb: 28 mm x 34 mm |
1590BB | X | Yes | No | No | No | Bass Synth | X |
Exploder | PCB | 2-1/8" x 2-3/8" 53 mm x 61 mm |
1590B | X | Yes | No | No | No | Oct/Fuzz | X |
Flabulanche | PCB | 2" x 2-5/16" 50 mm x 59 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Freekout | PCB | 2-5/16" x 3-1/16" 59 mm x 77 mm |
1590N1 | X | Yes | No | No | No | RingMod | X |
Fuzzy Britches | PCB | 2-1/8" x 1-3/8" 54 mm x 35 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Gas Tank | PCB | 2-5/16" x 2-11/16" 59 mm x 68 mm |
1590N1 | X | Yes | No | No | No | Bass Overdrive | X |
Glitchee | PCB | 2-5/16" x 3-1/16" 58 mm x 78 mm |
1590N1 | X | Yes | No | No | No | OD + SubOctave + Filter | X |
Green Bean | PCB | 1-15/16" x 2" 50 mm x 50 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Green Bean | PCB | 1-15/16" x 2" 50 mm x 50 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Harbinger TWO | PCB | 2-3/4" x 3-5/8" 69 mm x 92 mm |
Wahwah | X | Yes | No | No | No | Univibe | X |
Honeydripper | PCB | 2-5/16" x 3-5/16" 60 mm x 85 mm |
1590N1 | X | Yes | No | No | No | Vocal Filter | X |
Junk Trunk | PCB | 2-5/16" x 2-7/8" 59 mm x 75 mm |
1590N1 | X | Yes | No | No | No | Bass Enveloper | X |
Karate Shop | PCB | 1-15/16" x 1-15/16" 50 mm x 50 mm |
1590B | X | Yes | No | No | No | Tone Control | X |
The Laureate | PCB | 2-5/8" x 3-3/8" 59 mm x 85 mm |
1590N1 | X | Yes | No | No | No | Overdrive | X |
Mandroid | PCB | 4-3/8" x 1-5/8" 112 mm x 41 mm |
1590BB | X | Yes | No | No | No | Bitcrusher | X |
Mandroid | PCB | 4-3/8" x 1-5/8" 112 mm x 41 mm |
1590BB | X | Yes | No | No | No | Bitcrusher | X |
MeatQlaw | PCB | 2-1/8" x 2-3/8" 53 mm x 59 mm |
1590B | X | Yes | No | No | No | Boost | X |
Mysterioso | PCB | 2-5/16" x 2-3/4" 60 mm x 70 mm |
1590N1 | X | Yes | No | No | No | Overdrive | X |
Naughty Fish | PCB | 2-1/8" x 2-13/16" 55 mm x 72 mm |
1590B | X | Yes | No | No | No | Envelope Filter | X |
Peacekeeper | PCB | 2" x 1-13/16" 50 mm x 46 mm |
1590B | X | Yes | No | No | No | Distortion | X |
RangeMaster | PCB | 2" x 1-3/4" 50 mm x 44 mm |
1590B | X | Yes | No | No | No | Boost | X |
Rough Cut | PCB | 2-13/16" x 2-5/16" 77 mm x 59 mm |
1590N1 | X | No | No | No | No | Compressor | X |
Rustbucket | PCB | 4-1/4" x 3" 109 mm x 77 mm |
1590BB | X | Yes | No | No | No | Volume Swell | X |
Sharkfin | PCB | 3-3/8" x 2-3/8" 85 mm x 60 mm |
1590BB | X | Yes | No | No | No | Filter Sample | X |
Tone Virus | PCB | 3-7/16" x 3" 87 mm x 76 mm |
1590BB | X | No | No | No | No | PLL-Synth | X |
Total Recall | PCB | main: 3-5/16" x 3-7/8" main: 85 mm x 98 mm, extra bbd: 1-13/16" x 1-1/4" extra bbd: 46 mm x 32 mm |
1590BB | X | Yes | No | No | No | Delay | X |
Weener Wah | PCB | 1-15/16" x 2-1/4" 50 mm x 57 mm |
Wahwah | X | Yes | No | Maybe? | Maybe? | Wahwah | X |
Need:
- 12 x 1590B
- 9 x 1590N1
- 10 x 1590BB
- 1 x 125BB / 1590BB2
- 2 x Wahwah
To do:
- 11 x 1590B: acquiring, drilling, painting
- 9 x 1590N1: acquiring, drilling, painting
- 10 x 1590BB: acquiring, drilling, painting
- 1 x 125BB / 1590BB2: acquiring, drilling, painting
- 2 x Wahwah: acquiring, drilling, painting, treadle-grip
Have:
- None
Cool Widgets
Madbean power board (Road Rage) was first was purchased to be combined with JMKPCBs Testing Rig. Recognized need for 12v power and bought more for a total of 15 in case additional power needs arose. Will keep extra on hand to make 12v and 15v power supplies as necessary.
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Road Rage | 15 | Power | XX" x XX" XX mm x XX mm |
N/A | +12-+15/18v Power Supply |
9mm BBoard Pot Adapter | 75 | Pot Adapter | XX" x XX" XX mm x XX mm |
N/A | 9mm Pot easy-use for Breadboard |
14mm Illuminated Pot Adapter | 4 | Pot Adapter | XX" x XX" XX mm x XX mm? |
N/A | For Glowy Dials on Pedals |
1/8" Audio Jack | 6 | PCB Mount | XX" x XX" XX mm x XX mm |
N/A | Audio jack mounts for 1/8" headphone plubs |
Notes:
- 1 x Road Rage to be combined with JMKPCBs Testing Rig
- 1 x Road Rage to be combined with JMKPCBs Test Oscillator
- 1 x Road Rage to be combined with Fuzzdog's JTM Boost for 9v/18v switch
- 12 x Road Rage boards kept in reserve
- SubTotal Pedals = 36
- Cumulative Total = 283
Mask Audio Electronics
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Iommic Boost | PCB | 2-3/16" x 1-3/8" 55 mm x 36 mm |
1590B | X | Yes | No | No | No | Boost | X |
Massive Amp | PCB | 2-1/16" x 1-5/8" 53 mm x 42 mm |
1590B | X | Yes | No | No | No | Boost | X |
One Knob Clang | PCB | 1-7/16" x 1-3/8" 40 mm x 36 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Quick Face | PCB | 2-1/8" x 1-3/8" 55 mm x 35 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Shattered Glass | PCB | 4-15/16" x 2-5/8" 125 mm x 66 mm |
1590XX | X | Yes | No | No | No | State Variable Filter | X |
T-Amp | PCB | 1-5/8" x 1-1/16" 42 mm x 27 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Need:
- 5 x 1590B
- 1 x 1590XX
To do:
- 5 x 1590B: acquiring, drilling, painting
- 1 x 1590XX: acquiring, drilling, painting
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Order Switcher | 5 | PCB | X-X" x X-X" XX mm x XX mm |
N/A | Control Switch |
Blend | 2 | PCB | X-X" x X-X" XX mm x XX mm |
N/A | Blend on Effect into another |
Order switcher allows you to toggle between order of your effects within a multi-PC board pedal. Distortion before overdrive? Overdrive first? This lets you pick.
- SubTotal Pedals = 6
- Cumulative Total = 289
Moonn Electronics
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
14X32 | PCB | 1-15/16" x 1-1/4" 49 mm x 31 mm |
1590B | X | No | No | No | No | Boost | X |
200 Sunny Suns | PCB | 1-15/16" x 1-15/16" 49 mm x 49 mm |
1590B | X | No | No | No | No | Preamp | X |
Aglio e Olio | PCB | 1-15/16" x 1-1/16" 49 mm x 27 mm |
1590B | X | No | No | No | No | Fuzz | X |
Amanita | PCB | 1-15/16" x 1-5/16" 49 mm x 34 mm |
1590B | X | No | No | No | No | Tremolo | X |
Antique Wave Disruptor | PCB | 1-15/16" x 31/32" XX mm x XX mm |
1590B | X | No | No | No | No | Fuzz | X |
Do I Know You | PCB | 1-15/16" x 1-9/16" 49 mm x 40 mm |
1590B | X | No | No | No | No | Noise | X |
Fuzz Remedy | PCB | 1-7/8" x 1-7/8" 48 mm x 48 mm |
1590B | X | No | No | No | No | Fuzz | X |
Joghurt Im Rucksack | PCB | 1-15/16" x 1-1/8" 49 mm x 27 mm |
1590B | X | No | No | No | No | Octave Fuzz | X |
Knut | PCB | 1-15/16" x 1-1/4" 49 mm x 31 mm |
1590B | X | No | No | No | No | Bitcrusher | X |
Love Yourself In Every Way | PCB | 3-5/16" x 2" 84 mm x 50 mm |
1590BB | X | No | No | No | No | Multi-Select Bass Fuzz | X |
More Than A Walkman | PCB | 1-15/16" x 1-3/16" 49 mm x 35 mm |
1590B | X | No | No | No | No | Distortion | X |
FuzzheadFX Mosfet Pie | PCB | 1-15/16" x 2-3/16" 49 mm x 55 mm |
1590B | X | No | No | No | No | Fuzz | X |
Mud Tosser | PCB | 2" x 1-3/16" 49 mm x 30 mm |
1590B | X | No | No | No | No | Fuzz | X |
Queen Lizard | PCB | 1-15/16" x 1-1/2" 48 mm x 39 mm |
1590B | X | No | No | No | No | Octave Fuzz | X |
Schwurbel | PCB | 1-15/16" x 1-5/16" 49 mm x 34 mm |
1590B | X | No | No | No | No | Fuzz w/ Modulated Tremolo(?) | X |
Seitan Valve | PCB | 1-15/16" x 1-7/16" 49 mm x 46 mm |
1590B | X | No | No | No | No | Fuzz | X |
FuzzheadFX Stoner Bee | PCB | 2" x 1-15/16" 50 mm x 49 mm |
1590B | X | No | No | No | No | Fuzz | X |
Tryhard | PCB | 31/32" x 1-1/8" 25 mm x 29 mm |
1590A | X | No | No | No | No | Wah | X |
Need:
- 17 x 1590B
- 1 x 1590BB
To do:
- 17 x 1590B: acquiring, drilling, painting
- 1 x 1590BB: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 18
- Cumulative Total = 307
MusicPCB
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Gristleizer | PCB | 3-1/4" x 2-1/16" 83 mm x 563 mm |
1590BB | X | Yes | No | No | No | Tremolo | X |
Meat Sphere | PCB | 5" x 2-5/16" 127 mm x 59 mm |
1590XX | X | Yes | No | No | No | Envelope Filter | X |
Uglyface | PCB | 2" x 1-7/8" 51 mm x 36 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Need:
- 1 x 1590B
- 1 x 1590BB
- 1 x 1590XX
To do:
- 1 x 1590N1: acquiring, drilling, painting
- 1 x 1590BB: acquiring, drilling, painting
- 1 x 1590XX: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 3
- Cumulative Total = 310
OLCircuits
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Dr. Watt | Kit | X-X" x X-X" XX mm x XX mm |
1590BB | Yes | Yes | No | Yes | No | Amp Emulator | X |
Flipster | Kit | X-X" x X-X" XX mm x XX mm |
1590BB | Yes | Yes | No | Yes | No | Amp Emulator | X |
Orange Peel | Kit | X-X" x X-X" XX mm x XX mm |
1590BB | Yes | Yes | No | Yes | No | Amp Emulator | X |
Slow Century | Kit | X-X" x X-X" XX mm x XX mm |
1590BB | Yes | Yes | No | Yes | No | Amp Emulator | X |
Need:
- 1 x 1590N1
- 4 x 1590BB
To do:
- 1 x 1590N1: acquiring, drilling, etching, painting
- 4 x 1590BB: etching, painting
Have:
- 4 x 1590BB: acquired, drilled
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Tube Cricket* | 1 | Kit | X" x X" XX mm x XX mm |
1590N1 | Miniature 1W Tube Amp |
NOTE: Tube Cricket Pedal in a 1590N1 is much "cooler" than the 1590BB it came with. Going to get and drill a 1590N1. The Tube Cricket is technically a mini-amp, not a pedal and so cannot be counted as such.
- SubTotal Pedals = 4
- Cumulative Total = 314
Parasit Studio
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
0415 Guitar Synth | PCB | 1-15/16" x 2" 49 mm x 50 mm |
1590B | X | Yes | No | No | No | Octave | X |
0415 Guitar Synth | PCB | 1-15/16" x 2" 49 mm x 50 mm |
1590B | X | Yes | No | No | No | Octave | X |
The Corruptor | PCB | 1-7/8" x 1-11/16" 47 mm x 43 mm |
1590B | X | Yes | No | No | No | RingMod | X |
Darkadiator | PCB | 3-1/16" x 2-1/4" 77 mm x 57 mm |
1590BB | X | Yes | No | No | No | Oct/Fuzz | X |
Into the Unknown | PCB | 3-3/8" x 2-3/4" 86 mm x 69 mm |
1590BB | X | Yes | No | No | No | Synth | X |
Multiwave Guitar Synth | PCB | 2-3/16" x 2-1/2" 55 mm x 54 |
1590B | X | Yes | No | No | No | Synth | X |
New Wave CV Generator | PCB | 3-3/8" x 3-1/8" 86 mm x 80 mm |
1590BB | X | Yes | No | No | No | Control Voltage | X |
Quantum Defrakulator Mk3 | PCB | 4-1/4" x 2-3/4" 109 mm x 70 mm |
BBDD?(JJ?) | X | Yes | No | No | No | Synth | X |
Sentient Machine | PCB | 2-3/8" x 2-7/8" 60 mm x 72 mm |
1590N1 | X | Yes | No | No | No | Phaser | X |
The Sidescroller | PCB | 2-3/16" x 2-1/4" 55 mm x 57 mm |
1590B | X | Yes | No | No | No | Oct/Fuzz | X |
Sonic Reducer | PCB | 1-13/16" x 1-3/4" 46 mm x 44 mm |
1590B | X | Yes | No | No | No | BitCrusher | X |
Theremin Fuzz | PCB | 1-7/8" x 1-15/16" 48 mm x 50 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Theremin Fuzz | PCB | 1-7/8" x 1-15/16" 48 mm x 50 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
The Xor'cist | PCB | 3-3/8" x 1-15/16" 87 mm x 49 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
The Xor'cist | PCB | 3-3/8" x 1-15/16" 87 mm x 49 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
The Xor'cist | PCB | 3-3/8" x 1-15/16" 87 mm x 49 mm |
1590BB | X | Yes | No | No | No | Distortion | X |
Need:
- 8 x 1590B
- 1 x 1590N1
- 7 x 1590BB
To do:
- 8 x 1590B: acquiring, drilling, painting
- 1 x 1590N1: acquiring, drilling, painting
- 7 x 1590BB: acquiring, drilling, painting
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Mod Board | 2 | PCB | 1-1/4" x 1-5/16" 31 mm x 34 mm |
N/A | Warble different effects |
RC Box | 2 | PCB | 4-7/8" x 4-1/16" 125 mm x 104 mm |
1590XX(?) | Part Substitution and Circuit Test Box |
We thought the mod boards would be perfect for the Theremin Fuzzes as the "spooky 1950s" sound of B-grade horror movies typically involved a warbling theremin and we thought it would be cool to recreate this effect even though we plan on building our own theremin too! The RC Boxes are like vintage Resistor/Capacitor decade boxes, but even more functional than those decade boxes as with Parasit Studio RC Boxes you can also chain the resistors and capacitors into both RC or CR filters.
- SubTotal Pedals = 16
- Cumulative Total = 330
PCB Mania
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Amazing Booster* | PCB | X" x X" X mm x X mm |
X | X | No | No | No | No | Boost | X |
Amped S-Bass | PCB | 3-5/16" x 2-11/16" 84 mm x 68 mm |
1590BB | X | Yes | No | No | No | Amp Emulator | X |
Appetite for Distortion | PCB | 2-5/16" x 2" 59 mm x 50 mm |
1590N1 | X | Yes | No | No | No | Amp Emulator | X |
Atom Boost | PCB | 1-7/8" x 1-7/16" 48 mm x 36 mm |
1590B | X | Yes | No | No | No | Boost | X |
Black Sun of Doom | PCB | 3-3/16" x 2-5/8" 81 mm x 68 mm |
1590BB | X | Yes | No | No | No | Amp Emulator | X |
Clockwork Orange | PCB | 3-7/8" x 1-5/8" 99 mm x 41 mm |
1590BB | X | Yes | No | No | No | Amp Emulator | X |
Death by Flaming Ring | PCB | 2-5/16" x 2-11/16" 58 mm x 69 mm |
1590N1 | X | Yes | No | No | No | Ring Mod | X |
Death by Fuzz I | PCB | 1-7/8" x 2" 48 mm x 51 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Death by Fuzz III | PCB | 4-7/16" x 2-1/2" 112 mm x 63 mm |
1590BB | X | Yes | No | No | No | Fuzz | X |
Dimehead | PCB | X-X/X" x X" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Amp Emulator | X |
Dwarf Destroyer | PCB | 2" x 1-5/8" 51 mm x 40 mm |
1590B | X | Yes | No | No | No | Fuzz | X |
Electric Lover | PCB | 3-1/4" x 2-5/8" 82 mm x 68 mm |
1590BB | X | Yes | No | No | No | Flanger | X |
Engl Preamp | PCB | X" x X" X mm x X mm |
X | X | X | No | No | No | Amp Emulator | X |
Fuzz-Phase | PCB | 3-7/8" x 2-11/16" 86 mm x 69 mm |
1590BB | X | Yes | No | No | No | Fuzz / Phaser? | X |
Green Lemon | PCB | 2-5/16" x 1-13/16" 58 mm x 46 mm |
1590N1 | X | Yes | No | No | No | Amp Emulator | X |
Green Octaver | PCB | 1-3/8" x 1-1/4" 36 mm x 31 mm |
1590B | X | Yes | No | No | No | Octave | X |
Hyperion Fuzz | PCB | 2-5/16" x 3-1/2" 59 mm x 89 mm |
1590N1 | X | Yes | No | No | No | Fuzz | X |
JCM-800 PreAmp Simulator | PCB | 2-3/8" x 1-7/8" 61 mm x 47 mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
JFT Phaser | PCB | 4-5/16" x 3-13/16" 109 mm x 160 mm |
1590XX | X | Yes | No | No | No | Phaser | X |
Kheiron Klon | PCB | 4-7/16" x 2-3/8" 112 mm x 61 mm |
1590BB | X | Yes | No | No | No | Overdrive | X |
Lemon Bass | PCB | 2-5/16" x 2-5/8" 59 mm x 67 mm |
1590N1 | X | Yes | No | No | No | Amp Emulator | X |
Lemon Rockverb | PCB | 2-3/16" x 2" 55 mm x 50 mm |
1590N1 | X | Yes | No | No | No | Amp Emulator | X |
No Noise Gate | PCB | X" x X" X mm x X mm |
X | X | X | No | No | No | Noise Gate | X |
Power Engl | PCB | X" x X" X mm x X mm |
X | X | X | No | No | No | Amp Emulator | X |
Samurai Sword* | PCB | X" x X" X mm x X mm |
X | X | No | No | No | No | Boost | X |
Slava Ukraine | PCB | 6-1/4" x 2-1/2" 160 mm x 65 mm |
Wah(?) | X | Yes | No | No | No | Wah-Fuzz-Tremolo | X |
Slava Ukraine | PCB | 6-1/4" x 2-1/2" 160 mm x 65 mm |
Wah(?) | X | Yes | No | No | No | Wah-Fuzz-Tremolo | X |
Soldado Preamp | PCB | 2-5/16"1-15/16" 59 mm x 50 mm |
1590N1 | X | Yes | No | No | No | Amp Emulator | X |
Soviet Drive | PCB | 2-5/16" x 2-3/4" 58 mm x 69 mm |
1590N1 | X | Yes | No | No | No | Overdrive/Distortion | X |
Sunn Beta Lead | PCB | 3-5/8" x 3-5/8" 86 mm x 86 mm |
1590BB | X | Yes | No | No | No | Amp Emulator | X |
T.O.C. | PCB | 4-7/16" x 2-3/8" 112 mm x 61 mm |
1590B | X | Yes | No | No | No | Overdrive | X |
Tone Guard Device | PCB | 4-7/16" x 2-3/8" 112 mm x 61 mm |
1590B | X | Yes | No | No | No | Compressor | X |
Uberknall & Amp Tone Stack | PCB | X" x X" X mm x X mm |
X | X | X | No | No | No | Amp Emulator | X |
Uberknall Preamp | PCB | X" x X" X mm x X mm |
X | X | X | No | No | No | Amp Emulator | X |
Wolfgang 5051 | PCB | X" x X" X mm x X mm |
X | X | Yes | No | No | No | Amp Emulator | X |
Zombie Choir II | PCB | 2-3/16" x 2-3/16" 56 mm x 56 mm |
1590BB | X | Yes | No | No | No | Chorus | X |
(*) = Not a pedal. Could be for making a builder/tester tool, or be serving as a constituent part to a pedal.
Need:
- 3 x 1590B
- 9 x 1590N1
- 8 x 1590BB
- 1 x 1590XX
- 2 x Wahwah
To do:
- 3 x 1590B: acquiring, drilling, painting
- 9 x 1590N1: acquiring, drilling, painting
- 8 x 1590BB: acquiring, drilling, painting
- 1 x 1590XX: acquiring, drilling, painting
- 2 x Wahwah: acquiring, drilling, painting
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Clean Blend Master | 1 | PCB | X-X/X" x X-X/X" XX mm x XX mm |
N/A | Clean Insert |
Green Octaver | 1 | PCB | 1-3/8" x 1-1/4" 36 mm x 31 mm |
N/A | Octave Up |
Clean Blend is listed as a test tool to help insert clean tone so distortion tones don't get lost. Green Octaver is a PC board for the Armstrong Green Ringer. We may include/combine it into a pedal if it strikes us as a good idea. If, after testing, the inclusion actually ends up making a pedal better, we'll keep it in there.
EQ Development Pack
This isn't a pedal, but we're having to do all the same work (actually, it's more) that we would have to do in order to build a pedal, so we're including it here.
PCB Mania offers all their tone stack PCBs in a single discounted package. At the time we purchased this, we questioned ourselves as to whether or not we were being stupid for buying this pack, but obviously, we bought it anyway.
It seemed to us (at the time, and still now) that the best way to use these tone stacks would be to package them together in a single enclosure for circuit development / investigation efforts. So we're building out these PCBs and combining them into a single enclosure. This is so we can make all of the different tone stacks available in a selectable manner. The idea is to make new tone shaping options accessible, for use in, or for interaction with, any effects. Specifically we're interested combining with preamps where we may wish investigate using different tone stacks to find the optimal sounding result.
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Active EQ | 1 | PCB | 2-5/16" x 1-1/4" 59 mm x 32 mm |
TBD | Tone Stack |
Amp Tone Stack & Gain Recovery | 1 | PCB | 2-5/16" x 1-1/8" 59 mm x 29 mm |
TBD | Tone Stack |
Benzin EQ | 1 | PCB | 2-5/16" x 1-7/16" 59 mm x 36 mm |
TBD | Tone Stack |
Falcon EQ | 1 | PCB | 2-3/8" x 1-1/4" 60 mm x 32 mm |
TBD | Tone Stack |
Hybrid EQ | 1 | PCB | 2-5/8" x 1-5/16" 59 mm x 33 mm |
TBD | Tone Stack |
We always try to match the smallest enclosure possible taking into consideration the PCB and any controls that need to be fitted. Given preliminary attempts to match out the PCBs to the optimal enclosures, right now the 1550G appears to be a reasonable size (Though . In this case, obtaining a 5-pole 5-throw rotary switch (to switch power in/out, signal in/out, and an "active" indicator to select between the various tone stack PCBs) seems to be forcing us into the larger enclosures that Hammond makes. Vertical alignment of the PCBs in the enclosure appears to make a smaller enclosure possible. The 6P5T rotary we were able to find at a reasonable price is deeper (about 2 inches total) than any other rotaries we've spec'ed out for a build.
Need:
- 1 x 1550G
To do:
- 1 x 1550G: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 34
- Cumulative Total = 364
Pedal PCB
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Acid Rain Fuzz | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Fuzz | X |
Aphrodite Overdrive | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Overdrive | X |
Argentum 1212 Preamp | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Overdrive | X |
Backfeeder | PCB | X-X" x X-X" XX mm x XX mm |
1590BB / Wah | X | Yes | No | No | No | Distortion / Feedback | X |
Black Tiger Boost | PCB | X-X" x X-X" XX mm x XX mm |
1590B | X | Yes | No | No | No | Boost | X |
Bolide Distortion | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Boogie Monster | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
BuGGFX Daydream | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Multiband Delay | X |
BuGGFX Raincoat | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Buzz Tone Fuzz | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Fuzz | X |
Chaos Machine | PCB | X-X" x X-X" XX mm x XX mm |
1590XX | X | Yes | No | No | No | Multi-Modulator | X |
Clandestine Preamp | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Preamp | X |
Cleric Fuzz | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Fuzz | X |
Closed Circuit Booster Limiter | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Tone Filter | X |
Closed Circuit Booster Limiter | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Tone Filter | X |
Deflector Reverb | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Reverb | X |
Double Pendulum | PCB | X-X" x X-X" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Tremolo | X |
Duocast | PCB | X-X" x X-X" XX mm x XX mm |
1590BBM | X | Yes | No | No | No | Preamp | X |
Golden Falk Overdrive | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Preamp | X |
Kickstart Distortion | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Low Tide Modulator | PCB | X-X" x X-X" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Chorus | X |
Lycan Overdrive | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
M800 Overdrive | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Overdrive | X |
Mean Green Metal Machine | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Mercurial Boost | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Tone Filter & Boost | X |
Mojito Deluxe Overdrive | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Overdrive | X |
Mojito Deluxe Overdrive | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Overdrive | X |
Mystery Machine | PCB | X-X" x X-X" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Overdrive | X |
Parasite Wah | PCB | X-X" x X-X" XX mm x XX mm |
Wah-wah | X | Yes | No | No | No | Wah-Wah | X |
Parasite Wah | PCB | X-X" x X-X" XX mm x XX mm |
Wah-wah | X | Yes | No | No | No | Wah-Wah | X |
Pharmacist Overdrive | PCB | X-X" x X-X" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Overdrive | X |
Quarantine Fuzz: Boneyard | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Fuzz | X |
Radium Springs | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Reverb | X |
Skeptical Buffer | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Line Driver | X |
Son of Ben Preamp | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Preamp | X |
Son of Ben Preamp | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Preamp | X |
Sorcerer | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Sorcerer | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Sproing Deluxe Reverb | PCB | X-X" x X-X" XX mm x XX mm |
1590BB | X | Yes | No | No | No | Reverb | X |
TearJerker Wah | PCB | X-X" x X-X" XX mm x XX mm |
Wah-wah | X | Yes | No | No | No | Wah-Wah | X |
Thermionic Deluxe | PCB | X-X" x X-X" XX mm x XX mm |
1590XX | X | Yes | No | No | No | Dual Distortion | X |
Tyrian Distortion | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
UniCab | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Cabinet Emulator | X |
Unison Double Tracker | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Modulated Reverb | X |
Valhalla Distortion | PCB | X-X" x X-X" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Distortion | X |
Viceroy Overdrive | PCB | 2.35" × 2.3" XX mm x XX mm |
1590N1 | X | Yes | No | No | No | Overdrive | X |
Need:
- 1 x 1590B
- 9 x 1590N1
- 1 x 1590BB
- 2 x 1590XX
- 3 x Wah
To do:
- 1 x 1590B: acquiring, drilling, painting
- 9 x 1590N1: acquiring, drilling, painting
- 1 x 1590BB: acquiring, drilling, painting
- 2 x 1590XX: acquiring, drilling, painting
- 3 x Wah-wah: acquiring, drilling, painting
Have:
- none
Cool Widgets
Widget | Count | Type | PCB Dimensions | Enclosure | Description |
---|---|---|---|---|---|
Intelligent Relay Bypass Module | 20 | PCB | X-X" x X-X" XX mm x XX mm |
NA | "Intelligent Function" Soft Switch |
DC Jack Breakout Board | 5 | PCB | X-X" x X-X" XX mm x XX mm |
NA | Power Rail |
- SubTotal Pedals = 46
- Cumulative Total = 410
Rullywow
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Arcadiator | PCB | 3-5/16" x 1-7/8" 84 mm x 48 mm |
1590BB | X | Yes | No | No | No | Oct/Fuzz | X |
Canned Yam | PCB | 1-15/16" x 1-5/8" 49 mm x 42 mm |
1590B | X | Yes | No | No | No | Bass Preamp | X |
Chugga Preamp | PCB | 1-15/16" x 1-1/2" 48 mm x 38 mm |
1590B | X | Yes | No | No | No | Boost | X |
Demented Compressor | PCB | 1-15/16" x 1-5/8" 48 mm x 41 mm |
1590B | X | Yes | No | No | No | Compressor | X |
Serpent Boost | PCB | 15/16" x 1-1/4" 23 mm x 33 mm |
1590B | X | Yes | No | No | No | Boost | X |
Superjudge | PCB | 1-11/16" x 1-7/16" 49 mm x 37 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Tremolow | PCB | 1-7/8" x 1-3/8" 48 mm x 35 mm |
1590B | X | Yes | No | No | No | Tremolo | X |
Need:
- 3 x 1590B
- 1 x 1590BB
To do:
- 3 x 1590B: acquiring, drilling, painting
- 1 x 1590BB: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 7
- Cumulative Total = 417
SushiBoxFX
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Ambassador | PCB | XX" x XX" XX mm x XX mm |
1590BB | X | Yes | No | Yes | No | Preamp | X |
Black Eye | PCB | XX" x XX" XX mm x XX mm |
1590BB | X | Yes | No | Yes | No | Preamp | X |
Diplomat | PCB | XX" x XX" XX mm x XX mm |
1590N1 | X | Yes | No | Yes | No | Preamp | X |
Lab Rat | PCB | XX" x XX" XX mm x XX mm |
1590BB | X | Yes | No | Yes | No | Distortion | X |
Particle Accelerator | PCB | XX" x XX" XX mm x XX mm |
1590N1 | X | Yes | No | Yes | No | Preamp | X |
Need:
- 2 x 1590N1
- 3 x 1590BB
To do:
- 2 x 1590N1: acquiring, drilling, painting
- 3 x 1590BB: acquiring, drilling, painting
Have:
- none
- SubTotal Pedals = 5
- Cumulative Total = 422
TH Custom
PCBs measured
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
3-Band Parametriq EQ | PCB | 4-1/4" x 3" 107 mm x 76 mm |
1590BB | X | Yes | No | No | No | Tone Filter | X |
The Devil | PCB | 2" x 1-3/4" 50 mm x 44 mm |
1590B | X | Yes | No | No | No | Distortion | X |
Merlin's Equinox II | PCB | 2-1/4" x 1-15/16" 58 mm x 49 mm |
1590B | X | Yes | No | No | No | Reverb | X |
Merlin's Glassblower don't have this yet |
PCB | X" x X" xx mm x xx mm |
1590B | X | Yes | No | No | No | Boost | X |
Merlin's Small Time | PCB | 2" x 1-13/16" 50 mm x 46 mm |
1590B | X | Yes | No | No | No | Echo | X |
Merlin's U-Boat | PCB | 2-1/4" x 1-1/2" 58 mm x 49 mm |
1590B | X | Yes | No | No | No | Octave | X |
ROG Ginger | PCB | 2" x 1-7/16" 50 mm x 40 mm |
1590B | X | Yes | No | No | No | Amp Emulator | X |
ROG Supreaux-Deux | PCB | 2" x 1-3/8" 50 mm x 34 mm |
1590B | X | Yes | No | No | No | Amp Emulator | X |
ROG Thor | PCB | 1-15/16" x 1-5/8" 58 mm x 50 mm |
1590B | X | Yes | No | No | No | Amp Emulator | X |
ROG Trivibe | PCB | 2" x 2" 51 mm x 50 mm |
1590B | X | Yes | No | No | No | Amp Emulator | X |
ROG Umble | PCB | 3-3/8" x 1-1/8" 85 mm x 29 mm |
1590B | X | Yes | No | No | No | Amp Emulator | X |
Tube Driver | PCB | 2-3/4" x 2" 70 mm x 50 mm |
1590BB | X | Yes | No | No | No | Tube Overdrive | X |
Valv-e-tizer | PCB | 2" x 2" 51 mm x 50 mm |
1590BB | X | Yes | No | No | No | Tube Overdrive | X |
Need:
- 3 x 1590B
- 1 x 1590BB
To do:
- 3 x 1590B: acquiring, drilling, painting
- 1 x 1590BB: acquiring, drilling, painting
Have:
- none
Cool Widgets
Widget | Type | PCB Dimensions | Effect |
---|---|---|---|
1-Band Parametriq EQ | PCB | 3-5/16" x 1-7/8" 84 mm x 48 mm |
Widget |
10 Watt Amp x2 | PCB | 3-5/16" x 1-7/8" 84 mm x 48 mm |
Widget |
Headphone Amp & Stereo Sim x2 | PCB | 1-15/16" x 1-1/2" 48 mm x 38 mm |
Widget |
MadBox | PCB | 1-15/16" x 1-5/8" 49 mm x 42 mm |
Widget |
Mini Headphone Extension x3 | PCB | 1-15/16" x 1-1/2" 48 mm x 38 mm |
Widget |
Parallel Mixer-Splitter | PCB | 1-15/16" x 1-5/8" 49 mm x 42 mm |
Widget |
Pro-cessor | PCB | 1-15/16" x 1-5/8" 48 mm x 41 mm |
Widget |
- SubTotal Pedals = 13
- Cumulative Total = 435
Miscellaneous
Pedal | Type | PCB Dimensions | Enclosure | Included? | Matched? | Encl. Etch? | Drilled? | Painted? | Effect | Etch Swirl |
---|---|---|---|---|---|---|---|---|---|---|
Destiny Behemoth | PCB 1: Headphone 2: Behemoth |
1: 2-5/16" x 1-3/16" 1: 58 mm x 30 mm 2: 3-15/16" x 3-1/4" 2: 100 mm x 83 mm |
1590XX | X | Yes | No | No | No | Self-contained Multi-Unit jjjimi84 @ PedalPCB Destiny Behemoth video |
X |
Diablado | PCB | 3-7/8" x 3-1/16" 98 mm x 77 mm |
1590BB(1590BBFL?) | X | Yes | No | No | No | Reverb | X |
Fake Klon 1 | Silver Enclosure | ?? | "Classic Klon" | X | Yes | No | No | No | ??? | X |
Fake Klon 2 | Gold Enclosure | ?? | "Classic Klon" | X | Yes | No | No | No | ??? | X |
Harmonic Boost | 3 Boards encl. splitter board |
SC: X" x X" SC: XX mm x XX mm AB: X-X" x X-X" AB: XX mm x XX mm Bl: X-X" x X-X" Bl: XX mm x XX mm |
1590BB(?) | X | Yes | No | No | No | Swappable Blendable Dual Boost Germanium Diode vs JFet Tranny Effects Layouts Speaker Cranker & PCBMania Amazing Boost |
X |
Sunn-T: Total Eclipse | 2 Boards | 3-7/8" x 3-1/16" 98 mm x 77 mm |
1590XX? | X | Yes | No | No | No | Full Sunn Pre and Power Amp GuitarPCB Sunn-T Preamp & Fuzzdog Sunny-T Extreme |
X |
Banshee | 2 Boards | 3-7/8" x 3-1/16" 98 mm x 77 mm |
Wah | X | Yes | No | No | No | Octave Theremin in a Wah Electric Roots Theremin & PCB Mania Green Octaver |
X |
Time Machine Boost | 2 Boards | 1: X" x X" 1: XX mm x XX mm 2: X-X" x X-X" 2: XX mm x XX mm |
1590YY(?) | X | Yes | No | No | No | Switchable Dual Boost Toneable Silicon vs Clean JFet Effects Layouts Strider & PCBMania Samurai Sword |
X |
Need:
- 1 x 1590J (?)
To do:
- 1 x 1590J: acquiring, drilling, painting
Have:
- 1 x Silver Klon enclosure
- 1 x Gold Klon enclosure
- SubTotal Pedals = 7 (Not counting these yet)
- Cumulative Total = 435
Outstanding Stuff
- Total: 416 pedals to be completed
Extra Parts
Requiring Enclosures:
- 2 x Fuzzdog Creme Buffer PCBs
- 2 x Fuzzdog Inverting Buffer PCBs
- 4 x Fuzzdog Klon Buffer PCBs
Included in pedals:
- 70 x Fuzzdog Humstop mini-PCBs
- 1 x Fuzzdog stomp switch mini-PCB
- 1 x GGG 4PDT slide-switch
- 2 x GGG 6-way capacitor selector-PCBs
- 3 x GPCB toggle switch selector-PCBs
- 2 x GPCB roto-tone switch selector-PCBs
- 2 x GPCB stomp switch mini-PCBs
- 3 x GrindFX stomp mini-PCBs
- 2 x Parasit Mod mini-PCBs
Enclosures
Need:
- 72 x 1590B
- 31 x 1590N1
- 37 x 1590BB
- 1 x 1590BBFL
- 1 x 1590Q
- 3 x 1590XX
- 1 x 1590D
- 3 x 1590DD
- 2 x 1550G
- 1 x 1456KH3BKBK
- 9 x 1090NS (Done)
- 7 x Wah enclosures
- 600 x Hammond anti-tamper screws
Have:
- 69 x 1590B (Done)
- 16 x 1590N1 (pre-drilled)
- 15 x 1590N1
- 37 x 1590BB (Done)
- 1 x 1590BBFL (flanged box)
- 1 x 1590Q (Done)
- 3 x 1590XX (Done)
- 1 x 1590D (Done)
- 3 x 1590DD (Done)
- 2 x 1550G (Done)
- 1 x 1456KH3BKBK (Done)
- 9 x 1090NS (Done)
- 2 x Wah enclosures
- 350 x Hammond anti-tamper screws
Analysis shows we need:
- total of 186 total enclosures
- 78 x 1590B
- 44 to 49 x 1590BB (@122 or @127)
- 29 to 31 x 1590N1 (@151 or @162)
- 16 x Wah shells
- 7 x 1590XX
- 3 x 1590DD
- 2 x 1550G
- 1 x 1456KH3BKBK
- 1 x 1590D
- 1 x 1590Q
- Total DIY Pedals = 435
- Total Production Pedals = 115
- Total Pedals = 550