Difference between revisions of "User:Zander"

From Thermionic Studios
Jump to: navigation, search
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
{| align="right"
 +
| __TOC__
 +
|}
 +
==Pressing Issues==
 
Hello!
 
Hello!
  
Line 32: Line 36:
 
*already downloaded the optoisolator pdf document in case it disappears.
 
*already downloaded the optoisolator pdf document in case it disappears.
  
 +
== Pedal Building and Troubleshooting Tools ==
 +
* Transistor/Resistor/Capacitor/Diode tester with ZIF sockets
 +
* KLIQ Metropitch Digital Tuner/Metronome
 +
* Centech 61593 Digital Multimeter w/continuity tester
 +
* GGG Breakout Box
 +
* Prototyping Board - ZY-204 double breadboard mounted on plank with power, jacks, and potentiometer mounts
  
−
===Articles not finished===
+
 
 +
----
 +
 
 +
=== The Audition Box ===
 +
This is a second box meant to make sure that once something is wired up, that it actually works in a new context. A practice amp would work just as well, but sometimes that's not always available in the middle of the night when other members of the household are sleeping.  Unit consists of a 1590BB enclosure with both Cab Sim and Amp PCBs inside. Function requires a signal in to feed into the cab sim, after which it would go to the headphone amp for volume and then to signal out jack for listening.  1/4" and 1/8" jacks to accommodate both plugs for whichever headphone and associated plug is available.
 +
 
 +
; The Audition Box parts
 +
{| class="wikitable" style="left; margin-right:20px; background-color:#eeffee;" cellpadding="10"
 +
|-
 +
! Function || Type || Name || Source
 +
|-
 +
| Cab Sim || PCB || Marshall Cab Sim || GGG
 +
|-
 +
| Headphone Amp || PCB || Headphone Amp || GGG
 +
|-
 +
| Housing || Enclosure || 1590BB || Hammond MFG
 +
|-
 +
| In/Out || 1/4" phone/unbalanced line jacks || Insulated Jacks || Neutrik
 +
|-
 +
| Out || 1/8" headphone jack || Jack || Tayda has these.
 +
|}
 +
 
 +
* 1 x 1590BB
 +
 
 +
----
 +
 
 +
=== The Cutting Board ===
 +
So the purpose of this tool is to make the "Rock it before you box it" step of pedal assembly and troubleshooting much easier. We're trying to do a couple of things here:
 +
# Make sure that every kind of power (different voltages, positive & negative voltage) is available for testing, when appropriate
 +
# Make sure that it's possible to not only probe for signal on the PCB being that can be listened to, but also have another probe that makes it possible to inject signal on the PCB.  This is because we may not have all parts soldered into the board, or we may want to isolate listing to specific active components instead of the entire circuit.  We want to be able to get power and signal into the PCB before it's boxed, and for that signal either to be a test signal, or an instrument.  Also want to be able to listen through headphones for late-night efforts, in addition to using a practice amp.
 +
# Ideally, once a PCB has been through troubleshooting with The Cutting Board, any problems with assembly will necessarily be with any off-board components mounted inside the pedal enclosure, making final assembly and testing much quicker and easier.
 +
 
 +
==== Features ====
 +
* "Cutting Board" (1590BBFL + 1590BFL + Board)
 +
** Actual old plastic kitchen cutting board with cut-out handle
 +
** First Enclosure (1590BBFL) Flanged to attach to the cutting board
 +
*** Assembled Testing Rig PCB (JMK PCBs)
 +
*** Road Rage multi-voltage PCB (Madbean)
 +
*** Multiple AC Adapter connector cords for all possible power jacks
 +
*** Rotary Switch Voltage Select (-9v, +9v unfiltered, +9v filtered, +15v, +18v)
 +
*** Polarity Select Toggle
 +
*** Colored LED polarity indicator and LED voltage display
 +
*** Headphone Out
 +
*** Multiple Probes for Pedal Building: Power In, Signal In, Power Out, Signal Out,
 +
*** Toggled instrument / Signal generated test tone
 +
*** Signal '''Listen Probe''' (to capture listenable test signal anywhere on the PCB that's being assembled)
 +
** Second Enclosure (1590BFL) Flanged to attach to the cutting board
 +
*** Assembled Tiny Tester PCB (JMK PCBs)
 +
*** Signal '''Send Probe''' (to inject test signal anywhere on the PCB that's being assembled)
 +
*** Road Rage multi-voltage PCB (Madbean)
 +
*** Multiple Jacks Voltage Select (-9v, +9v unfiltered, +9v filtered, +12 v, +18v)
 +
 
 +
==== Cutting Board parts ====
 +
; Box 1: 1590BBFL
 +
Features
 +
* Test Signal Generator
 +
* Power for PCB
 +
* Hookups (Alligator clips) for signal and power
 +
* On/Off
 +
* Multi-select and indicator for +voltage supply
 +
* Safety to include On/Off failsafe and indicator for -voltage
 +
{| class="wikitable" style="left; margin-right:20px; background-color:#eeffee;" cellpadding="10"
 +
|-
 +
! Function || Type || Name || Source
 +
|-
 +
| RoadRage || PCB || Selectable Voltage Power Supply || Madbean
 +
|-
 +
| Headphone Amp || PCB || Headphone Amp || GGG
 +
|-
 +
| Housing || Flanged Enclosure || 1590BBFL || Hammond MFG
 +
|-
 +
| In/Out || 1/4" phone/unbalanced line jacks || Insulated Jacks || Neutrik
 +
|-
 +
| Out || 1/8" headphone jack || Jack || Tayda has these.
 +
|}
 +
1 x 1590BBFL - flanged to screw box to board
 +
 
 +
; Box 2: 1590BFL
 +
Features
 +
* Multiple Power Jacks
 +
** +9 unfiltered, +9 filtered, +12 filtered, +15 filtered, -9 filtered
 +
* 1 pluggable alligator clip for power
 +
* On/Off
 +
{| class="wikitable" style="left; margin-right:20px; background-color:#eeffee;" cellpadding="10"
 +
|-
 +
! Function || Type || Name || Source
 +
|-
 +
| RoadRage || PCB || Selectable Voltage Power Supply || Madbean
 +
|-
 +
| Housing || Flanged Enclosure || 1590BFL || Hammond MFG
 +
|-
 +
| Power Out || Multiple Labeled Voltages || Jack || Tayda has these.
 +
|}
 +
1 x 1590BFL - flanged to screw box to board
 +
 
 +
----
 +
 
 +
==Pedal Articles not finished==
 +
=== 1776 Effects ===
 +
* [[Bear Hug]]
 +
 
 +
=== AionFX ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== AMT Electronics ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Bogner ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Boss/Roland ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
* [[BF-2]]
 +
* [[DD-3]]
 +
* [[DN-2]]
 +
* [[RE-20]]
 +
* [[RC-3]]
 +
</div>
 +
 
 +
=== Breakfast Audio ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== BYOC ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
* [[B.G. Fuzz]]
 +
* [[Classic Compressor]]
 +
* [[Leeds Fuzz]]
 +
* [[Parametric EQ]]
 +
* [[Phase Royal]]
 +
* [[Soaring Skillet]]
 +
* [[The Swede]]
 +
</div>
 +
 
 +
=== Catalinbread ===
 +
* [[Naga Viper]]
 +
 
 +
=== Damage Control ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
* [[Demonizer]]
 +
* [[Solid Metal]]
 +
* [[Timeline]]
 +
* [[Womanizer]]
 +
</div>
 +
 
 +
=== Dead Astronaut FX ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
* [[Abductor II]]
 +
* [[Astro Flange]]
 +
* [[AstroSim]]
 +
* [[Black Triangle]]
 +
* [[Dreamtime]]
 +
* [[Easydriver]]
 +
* [[EBE Delay]]
 +
* [[Faze Filter]]
 +
* [[Skinwalker]]
 +
* [[Skyscape]]
 +
* [[Timestream]]
 +
* [[TremShifter]]
 +
</div>
 +
 
 +
=== DeadEndFX ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
* [[Andamento]]
 +
* [[Anubis]]
 +
* [[Atomic Duck]]
 +
* [[Calypso]]
 +
* [[Charonium]]
 +
* [[Cosmo King]]
 +
* [[Definite Phase]]
 +
* [[DEFX Superfuzz]]
 +
* [[Dekadent]]
 +
* [[Enigma]]
 +
* [[Flange-a-Rama]]
 +
* [[Fubble Wubble]]
 +
* [[Glenn]]
 +
* [[Hooke]]
 +
* [[Loop-D-Loop]]
 +
* [[Ludwig II]]
 +
* [[Moonstone]]
 +
* [[Mr. Multi]]
 +
* [[Neofuzz V]]
 +
* [[Oiolosse]]
 +
* [[PLLone]]
 +
* [[Pompei]]
 +
* [[Spectrum]]
 +
* [[String Ringer]]
 +
* [[Talkalizer]]
 +
* [[Tatiana]]
 +
* [[Terrahawk]]
 +
* [[Tresonator]]
 +
* [[Trible]]
 +
</div>
 +
 
 +
=== Delptronics ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Digitech/DOD ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
* [[Crossroads]]
 +
* [[Hyper Phase]]
 +
* [[Luxe]]
 +
* [[Synth Wah]]
 +
</div>
 +
 
 +
THATS ENOUGH FOR NOW.  GET TO WORK!
 +
 
 +
----
 +
 
 +
=== Dunlop/MXR ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Effects Layouts ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Electric Druid ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Electric Roots ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Electro-Harmonix ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Fuzzdog ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== General Guitar Gadgets ===
 +
* [[Scrabbler]]
 +
 
 +
=== God City Instruments ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Grind CustomsFX ===
 +
* [[Ultrastoner]]
 +
 
 +
=== GuitarPCB ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
* [[4-Track Fuzz]]
 
* [[Apollo Tremolo]]
 
* [[Apollo Tremolo]]
 +
* [[MoWah v3]]
 +
* [[OMG Mongoose Fuzz v3]]
 
* [[Sriracha Fuzz]]
 
* [[Sriracha Fuzz]]
 +
* [[Sunn-T Preamp]]
 +
</div>
 +
 +
=== Ibanez ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 +
=== JedsPeds ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 
* [[Hot Harmonics]]
 
* [[Hot Harmonics]]
−
* [[OMG Mongoose Fuzz v3]]
+
* [[Supreaux Deux]]
−
* [[MoWah v3]]
+
</div>
−
* [[Ultrastoner]]
+
 
 +
=== JMK PCBs ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
* [[Blue Warbler 2]]
 +
* [[Expandora]]
 +
* [[Hoodoo Drive]]
 +
* [[Level Up]]
 
* [[Modulay]]
 
* [[Modulay]]
−
* [[Supreaux Deux]]
+
</div>
 +
 
 +
=== Korg ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Lectric-FX ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Madbean ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
* [[Archibald]]
 +
* [[Bloviator]]
 +
* [[Blue Steel]]
 +
* [[Bumblebee]]
 +
* [[Burly Bear]]
 +
* [[Current Lover]]
 +
* [[Dragonbeard]]
 +
* [[Dragon Hound]]
 +
* [[Edgelord]]
 +
* [[Exploder]]
 +
* [[Flabulanche]]
 +
* [[Freekout]]
 +
* [[Fuzzy Britches]]
 +
* [[Gas Tank]]
 +
* [[Glitchee]]
 +
* [[Green Bean]]
 +
* [[Harbinger TWO]]
 +
* [[Honeydripper]]
 +
* [[Junk Trunk]]
 +
* [[Karate Shop]]
 +
* [[The Laureate]]
 +
* [[MeatQlaw]]
 +
* [[Mandroid]]
 +
* [[Mysterioso]]
 +
* [[Naughty Fish]]
 +
* [[Peacekeeper]]
 +
* [[RangeMaster]]
 +
* [[Rough Cut]]
 +
* [[Rustbucket]]
 +
* [[Sharkfin]]
 +
* [[Tone Virus]]
 +
* [[Total Recall]]
 
* [[Weener Wah]]
 
* [[Weener Wah]]
−
* [[Total Recall]]
+
</div>
−
* [[Tone Virus]]
+
 
−
* [[Sharkfin]]
+
=== Mask Audio Electronics ===
−
* [[Rustbucket]]
+
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
−
* [[Rough Cut]]
+
</div>
 +
 
 +
=== Maxon ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Moonn Electronics ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Morpheus ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== MusicPCB ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Nobels ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== OLCircuits ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Parasit Studio ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== PCB Mania ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== PedalPalFX ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Pedal PCB ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Peterson ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== ProCo ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Retro-Channel ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Rullywow ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Skreddy Pedals ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Subdecay ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== SushiBoxFX ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== TH Custom ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Throbak ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>
 +
 
 +
=== Zoom ===
 +
<div style="column-count:3;-moz-column-count:3;-webkit-column-count:3">
 +
</div>

Latest revision as of 07:31, 28 January 2024

Pressing Issues

Hello!

I have so much work to do! Gotta get all of Thermionic Studios' equipment up on this wiki and explained!

"There is no endorsement or approval from any manufacturer and this information is for education and comparison only."

Custom Wah-Wahs

Amps and manuals! (and Schematics!)

Effects and manuals!

Instruments

Microphones

Recording Gear...

Mixing Gear...

DON'T LOSE THIS LINK! https://forum.metropoulos.net/viewtopic.php?f=4&t=23420

Traynor

More stuff to follow: http://www.pedalhaven.com/history-earth-sound-research-amplifiers/

  • EarthSound Research Bass amp vs Peavey 400 Bass amp - total clone.

Harmony H415 Amplifier

Optoisolator Link: http://denethor.wlu.ca/pc300/optoisolators/analogoptoisolatorintroduction.pdf

  • already downloaded the optoisolator pdf document in case it disappears.

Pedal Building and Troubleshooting Tools

  • Transistor/Resistor/Capacitor/Diode tester with ZIF sockets
  • KLIQ Metropitch Digital Tuner/Metronome
  • Centech 61593 Digital Multimeter w/continuity tester
  • GGG Breakout Box
  • Prototyping Board - ZY-204 double breadboard mounted on plank with power, jacks, and potentiometer mounts


The Audition Box

This is a second box meant to make sure that once something is wired up, that it actually works in a new context. A practice amp would work just as well, but sometimes that's not always available in the middle of the night when other members of the household are sleeping. Unit consists of a 1590BB enclosure with both Cab Sim and Amp PCBs inside. Function requires a signal in to feed into the cab sim, after which it would go to the headphone amp for volume and then to signal out jack for listening. 1/4" and 1/8" jacks to accommodate both plugs for whichever headphone and associated plug is available.

The Audition Box parts
Function Type Name Source
Cab Sim PCB Marshall Cab Sim GGG
Headphone Amp PCB Headphone Amp GGG
Housing Enclosure 1590BB Hammond MFG
In/Out 1/4" phone/unbalanced line jacks Insulated Jacks Neutrik
Out 1/8" headphone jack Jack Tayda has these.
  • 1 x 1590BB

The Cutting Board

So the purpose of this tool is to make the "Rock it before you box it" step of pedal assembly and troubleshooting much easier. We're trying to do a couple of things here:

  1. Make sure that every kind of power (different voltages, positive & negative voltage) is available for testing, when appropriate
  2. Make sure that it's possible to not only probe for signal on the PCB being that can be listened to, but also have another probe that makes it possible to inject signal on the PCB. This is because we may not have all parts soldered into the board, or we may want to isolate listing to specific active components instead of the entire circuit. We want to be able to get power and signal into the PCB before it's boxed, and for that signal either to be a test signal, or an instrument. Also want to be able to listen through headphones for late-night efforts, in addition to using a practice amp.
  3. Ideally, once a PCB has been through troubleshooting with The Cutting Board, any problems with assembly will necessarily be with any off-board components mounted inside the pedal enclosure, making final assembly and testing much quicker and easier.

Features

  • "Cutting Board" (1590BBFL + 1590BFL + Board)
    • Actual old plastic kitchen cutting board with cut-out handle
    • First Enclosure (1590BBFL) Flanged to attach to the cutting board
      • Assembled Testing Rig PCB (JMK PCBs)
      • Road Rage multi-voltage PCB (Madbean)
      • Multiple AC Adapter connector cords for all possible power jacks
      • Rotary Switch Voltage Select (-9v, +9v unfiltered, +9v filtered, +15v, +18v)
      • Polarity Select Toggle
      • Colored LED polarity indicator and LED voltage display
      • Headphone Out
      • Multiple Probes for Pedal Building: Power In, Signal In, Power Out, Signal Out,
      • Toggled instrument / Signal generated test tone
      • Signal Listen Probe (to capture listenable test signal anywhere on the PCB that's being assembled)
    • Second Enclosure (1590BFL) Flanged to attach to the cutting board
      • Assembled Tiny Tester PCB (JMK PCBs)
      • Signal Send Probe (to inject test signal anywhere on the PCB that's being assembled)
      • Road Rage multi-voltage PCB (Madbean)
      • Multiple Jacks Voltage Select (-9v, +9v unfiltered, +9v filtered, +12 v, +18v)

Cutting Board parts

Box 1
1590BBFL

Features

  • Test Signal Generator
  • Power for PCB
  • Hookups (Alligator clips) for signal and power
  • On/Off
  • Multi-select and indicator for +voltage supply
  • Safety to include On/Off failsafe and indicator for -voltage
Function Type Name Source
RoadRage PCB Selectable Voltage Power Supply Madbean
Headphone Amp PCB Headphone Amp GGG
Housing Flanged Enclosure 1590BBFL Hammond MFG
In/Out 1/4" phone/unbalanced line jacks Insulated Jacks Neutrik
Out 1/8" headphone jack Jack Tayda has these.

1 x 1590BBFL - flanged to screw box to board

Box 2
1590BFL

Features

  • Multiple Power Jacks
    • +9 unfiltered, +9 filtered, +12 filtered, +15 filtered, -9 filtered
  • 1 pluggable alligator clip for power
  • On/Off
Function Type Name Source
RoadRage PCB Selectable Voltage Power Supply Madbean
Housing Flanged Enclosure 1590BFL Hammond MFG
Power Out Multiple Labeled Voltages Jack Tayda has these.

1 x 1590BFL - flanged to screw box to board

Pedal Articles not finished

1776 Effects

AionFX

AMT Electronics

Bogner

Boss/Roland

Breakfast Audio

BYOC

Catalinbread

Damage Control

Dead Astronaut FX

DeadEndFX

Delptronics

Digitech/DOD

THATS ENOUGH FOR NOW. GET TO WORK!

Dunlop/MXR

Effects Layouts

Electric Druid

Electric Roots

Electro-Harmonix

Fuzzdog

General Guitar Gadgets

God City Instruments

Grind CustomsFX

GuitarPCB

Ibanez

JedsPeds

JMK PCBs

Korg

Lectric-FX

Madbean

Mask Audio Electronics

Maxon

Moonn Electronics

Morpheus

MusicPCB

Nobels

OLCircuits

Parasit Studio

PCB Mania

PedalPalFX

Pedal PCB

Peterson

ProCo

Retro-Channel

Rullywow

Skreddy Pedals

Subdecay

SushiBoxFX

TH Custom

Throbak

Zoom

Retrieved from "https://thermionic-studios.com/wiki/index.php?title=User:Zander&oldid=5871"