Difference between revisions of "Multiplex Jr."
(→Controls) |
(→Controls) |
||
| Line 12: | Line 12: | ||
* Knob 2 - '''"Time"''': This knob adjusts the length between repeats with fully clockwise being the longest delay. | * Knob 2 - '''"Time"''': This knob adjusts the length between repeats with fully clockwise being the longest delay. | ||
* Knob 3 - '''"Feedback"''': Turning this knob clockwise increases the number of repeats in the delay. | * Knob 3 - '''"Feedback"''': Turning this knob clockwise increases the number of repeats in the delay. | ||
| − | * Knob 4 - '''"Mix"''': This knob sets the dry/wet mix. Setting the knob at 50% sets the pedal for 50% dry signal and 50% delay | + | * Knob 4 - '''"Speed"''': With the modulation engaged, this knob sets how quickly the delay gets modulated. |
| − | + | * Knob 5 - '''"Mix"''': This knob sets the dry/wet mix. Setting the knob at 50% sets the pedal for 50% dry signal and 50% delay. | |
| − | * Switch 1 - '''"Modulation On/Off": This | + | * Switch 1 - '''"Modulation On/Off": This switch applies or removes a modulation effect that can be applied to the delay. |
* Footswitch 1 - '''"On/Off":''' Switches the pedal between active/engaged ("on") and bypassed ("off"). | * Footswitch 1 - '''"On/Off":''' Switches the pedal between active/engaged ("on") and bypassed ("off"). | ||
Revision as of 08:04, 19 April 2019
1776 Effects Multiplex Jr pedal. This pedal is an earlier and stripped-down version of the Multiplex Echo Machine, also by 1776. Unlike the Multiplex echo machine, only offers an emulation of the Echoplex - including modulation controls to emulate an Echoplex that has fallen out of spec and is in need of some service.
- Thermionic Studios has one(1) Multiplex Jr. When we finish assembling it, it will be available for rental
Controls
- Knob 1 - "Depth": With the modulation engaged, this knob sets the depth of the modulation, with the most modulation at fully clockwise.
- Knob 2 - "Time": This knob adjusts the length between repeats with fully clockwise being the longest delay.
- Knob 3 - "Feedback": Turning this knob clockwise increases the number of repeats in the delay.
- Knob 4 - "Speed": With the modulation engaged, this knob sets how quickly the delay gets modulated.
- Knob 5 - "Mix": This knob sets the dry/wet mix. Setting the knob at 50% sets the pedal for 50% dry signal and 50% delay.
- Switch 1 - "Modulation On/Off": This switch applies or removes a modulation effect that can be applied to the delay.
- Footswitch 1 - "On/Off": Switches the pedal between active/engaged ("on") and bypassed ("off").
Bypass: True
The Multiplex Jr. is a true bypass pedal.
General Information
This pedal is 1776 Effects attempt to build a solid-state replica of the Echoplex tape/delay effect.
http://1776effects.com/wp-content/uploads/2015/03/Multiplex-Jr-BOM.pdf
Pedal Manual
As of this time, 1776effects.com has not issued a separate manual on how to use the pedal. The best current references that we're aware of are this wiki page, or the build manual linked here to the 1776 Effects website which describes the architecture of, and how to build the pedal.
Phase Inversion: Unknown
Without a schematic, we are not able to make a preliminary determination as to whether the Multiplex Jr. has an output that is inversely-phased from the input.
Once built, we'll attach an oscilliscope and determine if the phase from the output is inverted from the input.
Schematic
The 1776 Effects Build manual doesn't appear to contain the schematic though there is a page for it. This is likely an oversight. Hopefully this will be shared so we can post it and determine whether phase is inverted or not.
Artists
We are currently unaware of any artists actively using the pedal now, or who have in the past.
- Additional Sources
