Parametric Multiband Compressor
From Thermionic Studios
BYOC Parametric Multiband Compressor
Controls
Image from Anthony Artmann on YouTube
- Knob 1 - "Lo Comp": This knob determines the amount of compression applied to the low frequencies. Turn clockwise to increase compression.
- Knob 2 - "Lo Level": This is the volume level for the low-frequency compressor. Turning the knob clockwise will increase the volume for this compressor.
- Knob 3 - "Crossover Frequency": This knob sets the crossover point of the low- and high-frequency compressors. Turning the knob clockwise will expand the frequency band affected by the low-frequency compressor, reducing the frequency band affected by the high-frequency compressor. Turning counter-clockwise does the opposite.
- Knob 1 - "Lo Comp": This knob determines the amount of compression applied to the high frequencies. Turn clockwise to increase compression.
- Knob 2 - "Lo Level": This is the volume level for the high-frequency compressor. Turning the knob clockwise will increase the volume for this compressor.
- Footswitch 1 - "On/Off": Switches the pedal between being active and bypassed.
Bypass:True
The Parametric Multiband Compressor is True Bypass.
General Information
http://byocelectronics.com/pmbcinstructions.pdf
44 Hz vs 3.3 KHz
Phase Inversion
Pedal Manual
Schematic
© Copyright 2017, BYOC LLC.
Artists
We are currently unaware of any artists actively using the pedal now, or who have in the past.
- Additional Sources
