Difference between revisions of "Multiplex Jr."

From Thermionic Studios
Jump to: navigation, search
(Controls)
m
Line 17: Line 17:
  
 
==Phase Inversion==
 
==Phase Inversion==
Without a schematic, we are not able to make a preliminary determination as to whether the Multiplex Jr. pedal outputs an inversely-phased input.
+
Without a schematic, we are not able to make a preliminary determination as to whether the Multiplex Jr. has an output this is inversely-phased from the input.
  
 
==Pedal Manual==
 
==Pedal Manual==
 
+
As of this time, 1776effects.com has not issued a separate manual on how to use the pedal. The best current references that we're aware of are this wiki page, or the build manual linked here to the 1776 Effects website which describes the architecture of, and how to build the pedal.
  
 
==Schematic==
 
==Schematic==
The 1776 Effects Build manual doesn't appear to contain the schematic though there is a page for it.  This is likely an oversight.
+
The 1776 Effects Build manual doesn't appear to contain the schematic though there is a page for it.  This is likely an oversight.  Hopefully this will be shared so we can post it and determine whether phase is inverted or not.
  
 
----
 
----
 
;Additional Sources
 
;Additional Sources
 +
[http://1776effects.com/wp-content/uploads/2015/03/Multiplex-Build-Doc-1.7.pdf Multiplex Echo Machine Build Guide]
  
  

Revision as of 22:18, 12 February 2018

1776effects.com - Multiplex Jr.

Controls

  • Knob 1 - "Time": This knob adjusts the length between repeats with fully clockwise being the longest delay.
  • Knob 2 - "Feedback": Turning this knob clockwise increases the number of repeats in the delay.
  • Knob 3 - "Mix": This knob sets the dry/wet mix. Setting the knob at 50% sets the pedal for 50% dry signal and 50% delay.
  • Knob 4 - "Depth": With the modulation engaged, this knob sets the depth of the modulation, with the most modulation at fully clockwise.
  • Knob 5 - "Speed": With the modulation engaged, this knob sets how quickly the delay gets modulated.
  • Switch 1 - "Modulation On/Off": This switch turns the modulation on or off.
  • Footswitch 1 - "On/Off": This turns the pedal on and off

General Information

http://1776effects.com/wp-content/uploads/2015/03/Multiplex-Jr-BOM.pdf


Phase Inversion

Without a schematic, we are not able to make a preliminary determination as to whether the Multiplex Jr. has an output this is inversely-phased from the input.

Pedal Manual

As of this time, 1776effects.com has not issued a separate manual on how to use the pedal. The best current references that we're aware of are this wiki page, or the build manual linked here to the 1776 Effects website which describes the architecture of, and how to build the pedal.

Schematic

The 1776 Effects Build manual doesn't appear to contain the schematic though there is a page for it. This is likely an oversight. Hopefully this will be shared so we can post it and determine whether phase is inverted or not.


Additional Sources

Multiplex Echo Machine Build Guide