Multiplex Echo Machine

Controls

Knob 1 - "Delay 1": Sets the delay time of the first delay
Knob 2 - "Delay 2": Sets the delay time of the second delay
Knob 3 - "Feedback": Increases / decreases the number of repeats
Knob 4 - "Mix": Adjusts the dry/wet blend
Knob 5 (3-position switch) - "Tape Mode": Changes the way the signal is routed through the PT2399’s to simulate tape delays of the past:
1. Binson Echorec
2. Roland RE-201 Space Echo
3. Echoplex v. Ep3
Footswitch 1 - "On/Off": This switch turns the effect on and off in the signal chain
Footswitch 2 - "Tape Speed": Holding down the momentary footswitch slowly speeds up the delay speed. Releasing the switch slows the speed back down to the time setting of the knob. The tape speed is highly interactive depending on how you have "Delay 2" set.