SS-11B

From Thermionic Studios
Revision as of 18:02, 23 September 2018 by Zander (talk | contribs) (Controls)
Jump to: navigation, search

AMT Electronics SS-11B "Modern" Tube Preamp Pedal

Controls

Image from Prymaxe website
  • Switch 1 - "Output Select": When viewing the pedal straight-on, this switch is difficult to see as it is flush with the left-facing side. It can be found near the OUTPUT jack, opposite the RETURN jack. This switch toggles the function of the OUTPUT jack between -10 dB (for a standalone amplifier or another pre-amplifier), and + 4 dB (for a mixer or power amp).

Clean Channel

  • Knob 1 - "Level":
  • Knob 2 - "Low":
  • Knob 3 - "Mid":
  • Knob 4 - "High":
  • Knob 5 - "Gain":
  • Toggle 1 - "Bright":
  • Footswitch 1 - "Clean/Drive": The Clean Channel is self-contained, and the Clean/Drive footswitch toggles between the Clean and Drive channels.

Drive Channel

The "Drive" channel is split into 2 "sub" channels, Crunch and Lead. Both Crunch and Lead share a common set of tone controls.

Drive "Crunch"

  • Toggle 2 - "T.Shift": On/Off. Engaging this switch boosts middle and high frequencies in the Crunch channel.
  • Knob 6 - "Level Cr.": Sets the output volume for the Crunch channel. Turning clockwise increases the volume.
  • Knob 10 - "Gain Cr.": Sets the Distortion level for the Crunch channel. Clockwise increases the distortion.

Drive "Lead"

  • Toggle 3 - "T.Shift": On/Off. Engaging this switch boosts middle and high frequencies in the Lead channel.
  • Knob 11 - "Level Lead": Sets the output volume for the Lead channel. Clockwise increases volume.
  • Knob 12 - "Gain Lead": Sets the Distortion level for the Lead channel. Turning clockwise increases the distortion.
  • Knob 7 - "Low":
  • Knob 8 - "Med":
  • Knob 9 - "High":
  • Footswitch 2 - "Crunch/Lead": When the Drive channel has been selected, this footswitch toggles between the Crunch (less gain) and Lead (more gain) channels.

Jacks

  • Input - "Input":
  • Effects Out - "Send":
  • Effects In - "Return":
  • Output - "Output":

Bypass: Unknown

It it currently unknown if the SS-11B bypasses true, or buffered. We suspect it is true bypass.

General Information

http://amtelectronicsusa.com/productpagess11bv2.html

Pedal Manual

Phase Inversion: Unknown

Schematic

http://guitar-gear.ru/forum/topic/3003-%D0%B3%D0%B8%D1%82%D0%B0%D1%80%D0%BD%D1%8B%D0%B5-%D1%8D%D1%84%D1%84%D0%B5%D0%BA%D1%82%D1%8B-amt/page__st__120

Sort of blown away that we found this...

Artists

We are currently unaware of any artists actively using the pedal now, or who have in the past.


Additional Sources