855 Drive
From Thermionic Studios
BYOC 855 Drive - Tube Screamer clone with twice the gain
Controls
- Knob 1 - "Level": This knob sets the output volume of the pedal. Turning the knob clockwise increases the volume.
- Knob 2 - "Drive": This knob sets the overdrive level of the pedal. Turning the knob clockwise increases the overdrive.
- Knob 3 - "Tone": This knob is a treble-bleed style tone control. Full clockwise is full treble. Turn counter-clockwise to remove highs from the signal.
- Footswitch 1 - "On/Off": This switch turns the 855 Drive on or off.
General Information
http://byocelectronics.com/855instructions.pdf
Phase Inversion
From our examination of the schematic below, the 855 Drive appears to not invert phase on the output as compared with the signal that goes into the pedal.
| Electronic Part | Action | Phase State |
|---|---|---|
| Q1 | Does not Invert | Buffered-in Original Phase |
| IC1a | Inverts | Inverted |
| IC1b | Inverts | Reverted |
| Q2 | Inverts | Buffered-Out Reverted Phase |
This conclusion will need to be born out by testing and observation.
Pedal Manual
Schematic
© copyright 2011, BYOC LLC.
- Additional Sources
