Amp Selector FX Router

BYOC Amp Selector FX Router

Controls

• Switch 1 - "Transformer 1 Isolation Switch":
• Switch 2 - "Transformer 2 Isolation Switch":
• Footswitch 1 - "Both/One":
• Footswitch 2 - "A/B":

General Information

http://byocelectronics.com/ampselectorinstructions.pdf

There was also a thread or two on the byoc discussion boards about enabling a phase inversion switch on Output B:

http://www.byocelectronics.com/board/viewtopic.php?f=52&t=44330

http://www.byocelectronics.com/board/viewtopic.php?f=12&t=32756&hilit=amp+selector+phase

Phase Inversion

Electronic Part	Action	Phase State
IC1a	Inverts	Inverted
IC1b	Inverts	Reverted
IC2a	Inverts	Reverted
IC3a	Inverts	Inverted
IC1b	Inverts	Reverted

Pedal Manual

As of this time, BYOC has not issued a separate manual on how to use the pedal. The best reference is either this wiki page, or the instruction manual (linked above in General Information) at Buildyourownclone.com which describes the architecture of, and how to build the pedal.

Schematic

© Copyright 2011, BYOC LLC.

---

Additional Sources