DS-1

Boss DS-1 Distortion. Including the ProCo Rat, and the Electro Harmonix Big Muff Pi, this pedal has become renown for having earned the hearts of not only aspiring rock stars, but also for well-seasoned studio musicians and celebrity professionals.

The Boss DS-1 has gone through a couple of incarnations: the older and more highly-esteemed Made-in-Japan model, and the less-valued post-Japan model. Candidly, we don't really hear much of a difference, if any at all. After listening to a shoot-out between new and old models, many actually hear the newer DS-1 as "thicker" or "meatier" and like it better than the vintage model. We have a convenient link below for you to listen yourself.

We have an MIJ-version DS-1. Why do we have an MIJ DS-1? Not because we were on the look-out for one, but because one day we happened to see one at a Goodwill store. It was practically mint condition and the right price so we decided, "why not?"

• Thermionic Studios has one(1) Boss black-label (Made-in-Japan) DS-1 available for rental.

Controls

Image from Perfect Circuit Audio

• Knob 1 - "Tone": Adjusts the Tone with fully clockwise allowing all the high-frequency tone information into the signal.
• Knob 2 - "Level": Adjusts the output level with fully clockwise full loudness.
• Knob 3 - "Dist": Adjusts the distortion level with fully clockwise being maximum distortion.
• Footswitch 1 - "On/Off": This footswitch toggles the pedal between engaged/active ("On"), and bypassed ("Off")

Bypass: Buffered

The DS-1, like all Boss pedals, has a buffered, but high-quality bypass.

General Information

First offered for sale in 1978, the DS-1 Distortion was a follow-up to the Red-Yellow-Green pedal "marketing release" of the Boss SP-1 Spectrum (red), the OD-1 Overdrive (yellow), and the PH-1 Phaser (green).

Originally, it was well received and today continues to be a consistent seller for Boss.

We have posted both the schematics and the Owner's Manuals for the Made-in-Japan version of the DS-1, and the afterwards version.

Post-Japan Mftg.

Once Boss stopped making pedals in Japan and transitioned over to manufacturing in Taiwan, the architecture of the electronics changed. Most notably, a dual-opamp was used in place of the original single TA7136. Of course, other changes were made in resistors and capacitors in the effort to make the pedal sound the same. We think Boss did a pretty good job.

So, we're fairly agnostic with respect to the sound of a modern DS-1 as compared to a vintage DS-1. The reason being that we don't hear much of a difference, if any at all, between the new version versus the vintage version. If anything, in our estimation, the newer version sounds a bit thicker.

Phase Inversion: No

Distortion Circuit

Here we list the the active components in the order which the schematic indicates the instrument signal flows through them. Even if you're not familiar with reading a schematic, you should be able to see, at a basic level, how the instrument signal flows through the circuit.

Schematic ID	Electronic Part	Action	Phase State
Q1	2SC2240	Does not Invert	Original
Q6	2SK30A	Does not Invert	Original
Q2	2SC2240	Inverts	Inverted
IC1	TA7136	Inverts	Reverted
Q3	2SC732	Does not Invert	Reverted

Switching

You'll probably notice that there are other active components in the schematic, but that we're not listing them. The reason being is that these components are part of the "clickless" switching portion of the pedal. They do not interact with any signal from an instrument, and therefore don't have a meaningful effect in terms of inverting the signal's phase.

Q4: 2SC1685, Q5: 2SC1685, Q7: 2SK30A, Q8: 2SK30A

Schematic

Assumed Public Domain; unaware of any Copyright claims by P. Schmidt.

Artists

We are currently unaware of any artists actively using the pedal now, or who have in the past.

---

Additional Sources

• https://www.diystompboxes.com/DIYFiles/up/Build_Your_Own_DS-1_Distortion.pdf
• https://www.youtube.com/watch?v=RhTxcfcT9fU - Listen for yourself to see if there's a big difference...