BF-2

Boss BF-2 Flanger. "The purple one."

The Boss BF-2 Flanger is no longer being made.

Thermionic Studios has one (1) Boss BF-2 available for rental.

Controls

Image from Mass Street Music

• Knob 1 - "Manual":
• Knob 2 - "Depth":
• Knob 3 - "Rate":
• Knob 4 - "Res": (Resonance)
• Footswitch 1 - "On/Off": This switch toggle the pedal effect off and on.

Bypass:Buffered/True

Like all Boss pedals, the BF-2 Flanger has a buffered bypass.

Phase Inversion: Unknown

This is a rather unusual schematic. Instead of putting the correct symbol in the schematic for the modulation ICs, they've just drawn actual ICs. We also can't tell the electrical polarity of the ICs that are opamps because "2" and "3", and "6" and "5" are not indicative. We'll have to go looking for the opamps to better understand. To the best of our knowledge, most, but not all opamps have negative on pins 2 and 6, and positive on 3, and 5, but not always. As with other pedals, we'll have to put this on an oscilloscope to make sure whether it inverts phase or not.

Schematic ID	Electronic Part	Action	Phase State
Q1	TBD	Does Not Invert	Original Phase*
IC1b	X	X	X
IC2b	X	X	X
Q2	TBD	Does Not Invert	X
IC3	X	X	X
IC4	X	X	X
Q3	TBD	Does Not Invert	X
IC2a	X	X	X
Q4	TBD	Does Not Invert	X
IC1a	X	X	X

On the schematic there are additional opamps and transistors shown, but they're controlling the modulation and power of the oscillator IC (seen very center). Those remaining transistors and opamps aren't touching the sound signal directly, and so do not affect the signal phase in the pedal.

Schematic

© Copyright 1980, Roland Corporation.

Artists

• Fast Eddie Clarke
• Joe Satriani
• Johnny Marr
• Kurt Cobain
• Jason Newsted
• Robert Smith

---

Additional Sources

1. https://sites.google.com/site/cctsim/home/boss-bf-2-callibration - How to calibrate your BF-2 Flanger
2. https://equipboard.com/items/boss-bf-2-flanger
3. https://www.freeinfosociety.com/media.php?id=677